Canon Camera Eos 5d Mark Iii User Manual

271
Viewing the Images on TV
1Connect the provided AV cable to 
the camera.
 With the plug’s < Canon> logo facing 
the back of the camera, insert it into 
the < q > terminal.
2Connect the AV cable to the TV 
set.
 Connect the AV cable to the TV’s 
video IN terminal and audio IN 
terminal.
3Turn on the TV and switch the 
TV’s video input to select the 
connected port.
4Set the camera’s power switch to 
.
5Press the < x> button.
XThe image will appear on the TV 
screen. (Nothing will be displayed on 
the...

272
Protecting an image prevents it from being erased accidentally.
1Select [Protect images].
 Under the [ 31] tab, select [Protect 
images ], then press < 0>.
2Select [Select images].
  Select [Select images ], then press 
< 0 >.
X The images will be displayed.
3Protect the image.
  Turn the < 5> dial to select the 
image to be protected, then press 
< 0 >.
X The image will be protected, and the 
 icon will appear at the top of 
the screen.
  To cancel the image protection, press 
 again. The < K> icon...

273
K Protecting Images
You can protect all the images in a  folder or on a card at one time.
Under [3 1: Protect images], when 
you select [ All images in folder ] or [All 
images on card], all the images in the 
folder or on a card will be protected.
To cancel the image protection, select 
[Unprotect all images in folder ] or 
[Unprotect all images on card ].
During image playback, you can use the < c> button to protect an 
image.
 Set [ 53:  m  btn function ] to 
[Protect ].
  Play back the images and...

274
The images recorded on one card can be copied to the other card.
1Select [Image copy].
 Under the [ 31] tab, select [Image 
copy ], then press < 0>.
2Select [Sel.Image].
  Check the copy source and target 
card’s capacity.
  Turn the < 5> dial to select 
[Sel.Image ], then press < 0>.
3Select the folder.
  Turn the < 5> dial to select the folder 
containing the image to be copied, 
then press < 0>.
  Refer to the images displayed on the 
right to select the desired folder.
X The images in the...

275
a Copying Images
 4Select the images to be copied.
  Turn the < 5> dial to select an image 
to be copied, then press < 0>.
X The < X> icon will appear on the 
upper left of the screen.
  If you press the < u> button and turn 
the < 6> dial counterclockwise, you 
can select an image from a three-
image display. To return to the single-
image display, turn the < 6> dial 
clockwise.
  To select other images to be copied, 
repeat step 4.
5Press the < c> button.
 After selecting all the images to be...

276
a Copying Images
8Select [OK].
  Check the copy source and target 
card’s information.
  Turn the < 5> dial to select [ OK], 
then press < 0>.
X The copying will start and the 
progress will be displayed.
  When the copying is completed, the 
result will be displayed.
  Select [OK ] to return to the screen in 
step 2.
You can copy all the images in a fol der or on a card at one time. Under 
[x1: Image copy], when you select [ Sel.n] or [All image], you can 
copy all the images in t he folder or on a...

277
You can either select and erase images one by one or erase them in 
one batch. Protected images (p.272) will not be erased. Once an image is erased, it cann ot be recovered. Make sure 
you no longer need the image before erasing it. To prevent 
important images from being erased accidentally, protect 
them. Erasing a RAW+JPEG image will erase both the RAW 
and JPEG images.
1Play back the image to be erased.
2Press the < L> button.
X The Erase menu will appear at the 
bottom of the screen.
3Erase the...

278
L Erasing Images
2Select [Select and erase images].
  Select [Select and erase images], 
then press < 0>.
X The images will be displayed.
 
If you press the  button and turn 
the  dial counterclockwise, you 
can select an image  from a three-image 
display. To return to the single-image 
display, turn the <
6> dial clockwise.
3Select the images to be erased.
  Turn the < 5> dial to select the 
image to be erased, then press 
< 0 >.
X A  checkmark will be displayed 
on the upper left.
  To select...

279
The LCD monitor’s brightness is adjusted automatically for optimum 
viewing. You can set the automatic adjustment’s brightness level 
(brighter or darker) or adjust the brightness manually.
1Select [LCD brightness].
  Under the [ 52] tab, select [ LCD 
brightness ], then press < 0>.
2Select [Auto] or [Manual].
  Turn the < 6> dial to make the 
selection.
3Adjust the brightness.
  While referring to the gray chart, turn 
the < 5> dial, then press < 0>.
  You can adjust [ Auto] to one of three 
levels,...

280
Changing Image Playback Settings
Vertical images are rotated automatically so they 
are displayed vertically on the camera’s LCD 
monitor and on the personal computer instead of 
horizontally. The setting of this feature can be 
changed.
1Select [Auto rotate].
  Under the [ 51] tab, select [ Auto 
rotate ], then press < 0>.
2Set the auto rotation.
  Select the desired option, then press 
.
  OnzD
The vertical image is automatical ly rotated during playback on both 
the camera’s LCD monitor and on the...