Canon Camera Eos 5d Mark Iii User Manual

221
k Shooting Movies
ISO speed in the A mode
  In the  A mode, the ISO speed will be  set automatically within ISO 
100 - 12800.
ISO speed in the d , s, f , and  F modes
  The ISO speed will be set automatically within ISO 100 - 12800.
  Under [ z2: ISO speed settings ] (p.126), if you set the [ISO speed 
range ]’s [Maximum ] setting to [25600/H ] in the d, f , or F mode, 
the automatic ISO range will be ex panded to H (equivalent to ISO 
25600). Be aware that when you set [ Maximum] to [25600 ], the...

222
k Shooting Movies
Notes for Autoexposure, Shutter-priority AE, and Aperture-priority 
AE
During movie shooting in the A, d , s , f  or F mode,  this camera 
supports the function that turns the Speedlite’s LED light automatically 
in low-light conditions.  For details, refer to the Speedlite’s 
instruction manual.
Using an EX-series Speedlite (Sold Separately) Equipped 
with an LED Light
  You can lock the ex posure (AE lock) by pressing the < A> button 
(except in the  A mode, p.171). After applyi...

223
k Shooting Movies
You can manually set the shutter speed, aperture, and ISO speed for 
movie shooting. Using manual exposure to shoot movies is for 
advanced users.
1Set the Mode Dial to < a>.
2Set the Live View shooting/Movie 
shooting switch to < k>.
3 Set the ISO speed.
  Press the < m> button.
X The ISO speed setting screen will 
appear on the LCD monitor.
 
Turn the  dial to set the ISO speed.  For details on the ISO speed, see the 
next page.
4Set the shutter speed and 
aperture.
 Press the...

224
k Shooting Movies
ISO speed during manual-exposure shooting
 With [Auto] ( A), the ISO speed will be set automatically within ISO 
100 - 12800.
  You can set the ISO speed manually within ISO 100 - 12800 in 1/3-
stop increments. Under [ z2: ISO speed settings ], if you set [ISO 
speed range]’s [ Maximum] setting to [ 25600/H], the maximum ISO 
speed for manual ISO speed se tting will be expanded to H 
(equivalent to 25600). Be  aware that when you set [Maximum] to 
[25600], the maximum ISO speed wil...

225
k Shooting Movies
 Each time you press the < B> button, the information display will 
change.
* Applies to a single movie clip.
Information Display
Picture Style
Recording movie
AF point (Live mode)
ISO speed
Exposure level
Aperture
Shutter speed
White balance
Image-recording quality
Shooting mode
Movie recording size
AE lock
Card for recording/playback
AF mode
•
d : Live mode
• c : 
Face detection Live mode•f : Quick mode
Possible shots
Battery check
Frame rate
Movie shooting remaining time*/...

226
k Shooting Movies
Notes on Movie Shooting
 The camera cannot autofocus co ntinuously like a camcorder.
  During movie shooting, do not point  the lens toward the sun. The sun’s 
heat can damage the camera ’s internal components.
  Under [5 1: Record func+card/folder sel. ], even if [Record func.] is set 
to [ Rec. to multiple ] (p.116), the movie cannot  be recorded to both the 
CF card < f> and SD card < g>. If [ Rec. separately ] or [Rec. to 
multiple ] is set, the movie will be record ed to the...

227
k Shooting Movies
Notes on Movie Shooting
The final image simulation is a function that allows you to see the 
effects of the Picture Style, white balance, etc., on the image.
During movie shooting, the image displayed will automatically reflect 
the effects of the settings listed below.
Final image simulation for movies
  Picture Style
* All settings such as sharpness, contra st, color saturation, and color tone will 
be reflected.
  White balance
  White balance correction
  Exposure
  Depth of...

228
k Shooting Movies
While shooting a movie, you can also 
take a still photo by pressing the shutter 
button completely.
Taking still photos during movie shooting
  If you take a still photo during movie shooting, the movie will record 
a still moment lasting approx. 1 sec.
  The captured still photo will be reco rded to the card, and the movie 
shooting will resume automatically  when the Live View image is 
displayed.
  The movie and still photo will be recorded as separate files on the 
card.
  If...

229
k Shooting Movies
 AEB cannot be used.
  Even if an external Speedlit e is used, it will not fire.
  Continuous still photo shooting is  possible during movie shooting. 
However, the captured  images will not be displayed on the screen. 
Depending on the still photo’s image- recording quality, number of shots 
during continuous shooti ng, card performance, et c., movie shooting may 
stop automatically.
  If [z 5: Movie shoot. btn ] is set to [V/ ], you cannot take still photos.
 If you want to shoot...

230
If you press the , , , , or < b> 
button while the image is displayed on the LCD monitor, the setting 
screen will appear on the LCD moni tor and you can turn the  or 
< 5 > dial to set the respective function.
When  f is set, you can press the < S> button to select the AF area 
selection mode and AF point. The pr ocedure is the same as with 
viewfinder shooting. During manual -exposure shooting (p.223), you can 
press the < m> button to set the ISO speed.
Note that the following cannot be set: < q>...