Canon 70d W User Manual

321
K Protecting Images
You can protect all the images in a  folder or on a card at one time.
When you select [ All images in folder ] 
or [ All images on card ] in [31: 
Protect images], all the images in the 
folder or on the card will be protected.
To cancel the image protection, select 
[Unprotect all images in folder ] or 
[Unprotect all images on card ].
3 Protecting All Images in a Folder or on a Card
If you format the card  (p.57), the protected images will also be erased.
 Movies can also be...

322
You can either select and erase unnecessary images one by one or 
erase them in one batch. Protected  images (p.320) will not be erased.
Once an image is erased, it cannot be recovered. Make sure 
you no longer need the image before erasing it. To prevent 
important images from being erased accidentally, protect 
them. Erasing a RAW+JPEG image will erase both the RAW 
and JPEG images.
1Play back the image to be erased.
2Press the < L> button.
X The Erase menu will appear at the 
bottom of the...

323
L Erasing Images
2Select [Select and erase images].
  Select [Select and erase images ], 
then press < 0>.
X An image will be displayed.
  To display the three-image display, 
press the < I> button. To return to 
the single-image display, press the 
< u > button.
3Select the images to be erased.
  Turn the < 5> dial to select the 
image to be erased, then press 
< 0 >.
X A checkmark < X> will be displayed 
on the upper left of the screen.
  To select other images to be erased, 
repeat step 3.
4Erase...

324
You can adjust the brightness of the LCD monitor to make it easier to read.
1Select [LCD brightness].
 Under the [ 52] tab, select [ LCD 
brightness ], then press < 0>.
2 Adjust the brightness.
  While referring to the gray chart, 
press the < U> key, then press 
< 0 >.
Changing Image Playback Settings
3  Adjusting the LCD Monitor Brightness
To check the image’s exposure, lookin g at the histogram is recommended 
(p.295).
COPY  

325
Changing Image Playback Settings
Vertical images are rotated automatically so they 
are displayed vertically on the camera’s LCD 
monitor and on the computer instead of 
horizontally. You can change the setting for this 
feature.
1Select [Auto rotate].
 Under the [ 51] tab, select [ Auto 
rotate], then press < 0>.
2Set the auto rotation.
  Select the desired setting, then press 
.
  OnzD
The vertical image is automatically rotated during playback on both 
the camera’s LCD monitor and on the...

326
MEMO
COPY  

327
Post-ProcessingImages
You can process RAW images  with the camera, resize 
(reduce the pixel count of) JPEG images, and apply 
Creative filters.
  The  M icon at the upper right of the page title indicates that 
the function is available only in Creative Zone modes ( d/
s /f /a/F ).
 The camera may not be  able to process images taken with 
another camera.
  Post-processing images as described in this chapter is not 
possible if the camera is set for  multiple exposures, or while it 
is connected to...

328
You can process 1 images with the camera and save them as JPEG 
images. While the RAW image itself  does not change, you can process 
the RAW image according to different  conditions to create any number 
of JPEG images from it.
Note that 41  and 61  images cannot be processed with the 
camera. Use Digital Photo Professional (provided software, p.456) to 
process those images.
1Select [RAW image processing].
  Under the [ 31] tab, select [RAW 
image processing ], then press 
< 0 >.
X 1  images will...

329
R Processing RAW Images with the Camera N
Displaying the setting screen
 Press < 0> to display the setting 
screen. Turn the < 5> or < 6> dial 
to change the setting. To finalize the 
change and return to the screen in 
step 3, press .
 4Save the image.
 Select [W ] (Save), then press < 0>.
  Select [OK ] to save the image.
  Check the destination folder and 
image file number, then select [ OK].
  To process another image, repeat 
steps 2 to 4.
  To return to the menu, press the 
 button.
You can...

R Processing RAW Images with the CameraN
330
   Brightness adjustment
You can adjust the image brightness up to ±1 stop in 1/3-stop 
increments. The displayed image will  reflect the setting’s effect.
   Picture Style  (p.126)
You can select the Picture Style. Press the < U> key to select the 
Picture Style. To set the paramete rs such as sharpness, press the 
< B > button to display the setting screen. Press the < V> key to 
select a parameter to be adjusted, then press the  key to 
change it. To...