Candy Evow 4853 D Manual

20
21
A 
B 
C
EN 
Use the 4 feet to level the machine with the floor: a) 
Turn the nut clockwise to 
release the screw adjuster ofthe foot. b)   
Rotate foot to raise or 
lower it until it stands firmly onthe ground. c)   
Lock the foot in position 
by turning the nut anti-clockwise until it comes upagainst the bottom of themachine. Ensure that the knob is on the “OFF” position and the loaddoor is closed Insert the plug. ATTENTION: should it be necessary toreplace the supply cord,connect the wire...

22
23
A BCDEFGHILMNO P
EN
CHAPTER 6 CONTROLSDoor handle Timer knob for wash programmes with OFF position Wash Temperature button Spin Speed buttonDegree of soiling buttonButtons indicator light Intensive button Aquaplus buttonStart Delay button Drying programme selection button Start button Door locked indicator lightDigital Display Detergent drawer
PT
CAPÍTULO 6 DESCRIÇÃO DOS COMANDOSManipulo para abrir a porta Botão de selecção do programa de lavagem com a posição OFF  Tecla Temperatura de lavagem...

25
24
A
DESCRIPTION OFCONTROL“Kg DETECTOR” (Function active only onCotton and Syntheticsprogrammes)Through every wash phase  
“Kg 
DETECTOR” 
allows  to monitor 
information onthe wash load in the drum.So, as soon as the  
“Kg 
DETECTOR” 
is set in motion, in the 
first 4 minutes of the wash, it:- adjusts the amount of waterrequired- determines the length of thewash cycle- controls rinsingaccording to the type of fabricselected to be washed it:- adjusts the rhythm of drumrotation for the type of...

26
27
B
EN 
PROGRAMME SELECTOR WITH OFF POSITION WHEN THE PROGRAMME SELECTOR IS TURNED THEDISPLAY LIGHTS UP TOSHOW THE SETTINGS FORTHE PROGRAMMESELECTED.TODAY, MOST DETERGENTSHAVE BEEN IMPROVED TOWASH EFFICIENTLY ATLOWER TEMPERATURES,THEREFORE WE HAVE SETTHE DEFAULT TEMPERATURESETTINGS OF EACHPROGRAMME TO A LOWERLEVEL, SAVING ELECTRICITYAND REDUCING THECARBON FOOTPRINT OFYOUR MACHINE.YOU CAN SELECT AN HIGHTEMPERATURE BY PRESSINGTHE TEMPERATURE BUTTON.PLEASE REFER TO THEPROGRAMME GUIDE FORTHE...

28
29
CD
“WASH TEMPERATURE” BUTTON When a programme is selected the relevantindicator will light up to showthe recommended washtemperature.The Temperature button canbe used to decrease orincrease the temperature ofyour chosen wash cycle.Each time the button ispressed, the newtemperature level is shown onthe Wash TemperatureIndicator.“SPIN SPEED” BUTTON The spin cycle is very important to remove asmuch water as possible fromthe laundry withoutdamaging the fabrics. Youcan adjust the spin speed ofthe...

30
E
31
F
EN 
“DEGREE OF SOILING” BUTTONBy selecting this button(active only on COTTON andMIXED FIBRES programmes)there is a choice of 3 levelsof wash intensity, dependingon how much the fabricsare soiled.Once the programme hasbeen selected the indicatorlight will automatically showthe stain level set for thatprogramme. Selecting adifferent stain level therelevant indicator will lightup. For example: Using thisbutton on the Rapid Washcycle will enable you toselect either a 14, 30 or 44minute wash cycle....

32
33
G
EN
The option buttons should be selected before pressing theSTART buttonIf an option is selected that is not compatible with theselected programme thenthe light on the button firstflashes and then goes off. INTENSIVE BUTTON By pressing this button, which can only beactivated in the  
Cotton 
cycles, the sensors in thenew “Sensor” system  comeinto operation. They affectboth the selectedtemperature, keeping it at aconstant level throughoutthe wash cycle, and themechanical function of thedrum.The...

34
H
35
EN 
“AQUAPLUS” BUTTON By pressing this button you can activate a special newwash cycle in the  
Colourfast 
and  
Mixed Fabrics 
programs, thanks to the newSensor  System. This optiontreats with care the fibres ofgarments and the delicateskin of those who wearthem.The load is washed in amuch larger quantity ofwater and this, together withthe new combined actionof the drum rotation cycles,where water is filled andemptied, will give yougarments which have beencleaned and rinsed toperfection. The...

36
37
I
“DELAY START” BUTTON This button allows you to pre- programme the wash cycleto delay the start of the cyclefor up to 24 hours. To delay the start use thefollowing procedure:Set the required programme.Press the button once toactivate it (h00 appears onthe display) and then press itagain to set a 1 hour delay(h01 appears on the display);the pre-set delay increasesby 1 hour each time thebutton is pressed, until h24appears on the display, atwhich point pressing thebutton again will reset thedelay...

38
39
L
EN 
DRYING PROGRAMME SELECTION BUTTONWith the programme selector not in the OFF position, pressthe button to select therequired drying programme; anindicator will light to display thedrying result selected eachtime you press the button.To cancel the selection beforethe start of a dryingprogramme, press the buttonrepeatedly until the indicatorsgo out or return theprogramme selector to the OFFposition.To cancel the cycle during thedrying phase, hold the buttondown for 2 seconds until thecooling...