Candy Cm2 106 User Instructions

20
FR
IT
Mettre la machine à niveau
en reglant les pieds del’
avant.
a) Tourner dans le sens des
aiguilles d’une montre
l’écrou de façon à
dévérouiller la vis du pied.
b)Tourner le pied et le faire
monter ou descendre
jusqu’à obtenir une parfaite
adhérence au sol.
c)Enfin bloquer le pied en
revissant l’écrou dans le sens
inverse des aiguilles d’une
montre et le faire adhérer au
fond de la machine.
Vérifier que la manette soit
sur la position “OFF” et que le
hublot soit fermé.
Brancher la prise.
Une fois...

CHAPITRE 6
COMMANDESPoignée d’ouverture du
hublot
Temoin de verrouillage de
porte
Touche marche/pause
Touche Repassage FacileTouche Aquaplus   
Touche Très SaleTouche Départ Différé Touche Essorage
Indicateur lumineux vitesse
dessorage Indicateur lumineux temps
restant
Les voyants des  touches
Manette des programmes de
lavage avec OFF
Bacs à produits
CAPITOLO 6
COMANDIManiglia apertura oblò
Spia porta bloccata
Tasto Avvio/pausa
Tasto Stiro Facile
Tasto Aquaplus
Tasto Lavaggio Intensivo
Tasto Partenza...

25
FR
IT
DESCRIPTION DESCOMMANDESPOIGNEE D’OUVERTURE DU
HUBLOT
Pour ouvrir le hublot
actionner le bouton dans
la poignée.ATTENTION:
UN DISPOSITIF SPECIAL
DE SECURITE EMPECHE
L’OUVERTURE IMMEDIATE
DU HUBLOT A LA FIN DU
LAVAGE. APRES LA PHASE
D’ESSORAGE, ATTENDRE 2
MINUTES AVANT
D’OUVRIR LE HUBLOT.TEMOIN DE VERROUILLAGE DE
PORTE
Le voyant lumineux s’allume
lorsque la porte est
totalement fermée et que la
machine est en marche.
Lorsque la touche MARCHE
est enfoncée sur la machine
et que la porte est...

27
FR
IT
TOUCHE MARCHE/PAUSE
Après avoir sélectionné un
programme attendre que le
témoin STOP commence à
clignoter avant de presser la
touche MARCHE
Appuyez sur la touche pour
commencer le cycle (une
voyant s’allumera).ATTENTION:
LORSQUE LA TOUCHE
START A ETE
ENCLENCHEE L’APPAREIL
NE COMMENCERA LE
CYCLE QU’APRES
QUELQUES SECONDES.CHANGER LA
PROGRAMMATION APRES LE
DEMARRAGE DE LA MACHINE
(PAUSE)
Il est possible d’arrêter
momentanément le
programme pendant le cycle
de lavage, en maintenant le
bouton...

28
D
EN
The option buttons should
be selected before pressing
the START button
CREASE GUARD button 
The Crease Guard function
minimizes creases as much
as possible with a uniquely
designed     anti-crease
system that is tailored to
specific fabrics.
MIXED FABRICS- the water is
gradually cooled
throughout the final two
rinses with no spinning and
then a delicate spin assures
the maximum relaxation of
the fabrics.
DELICATE FABRICS– final two
rinses with no spinning and
then the fabrics are left in
water...

30
E
EN
AQUAPLUS BUTTON
By pressing this button you
can activate a special new
wash cycle in the Colourfast
and Mixed Fabrics
programs, thanks to the new
Sensor Activa System. This
option treats with care the
fibres of garments and the
delicate skin of those who
wear them.
The load is washed in a
much larger quantity of
water and this, together with
the new combined action
of the drum rotation cycles,
where water is filled and
emptied, will give you
garments which have been
cleaned and rinsed to...

32
F
EN
INTENSIVE BUTTON
By pressing this button,
which can only be
activated in the Cotton
cycles, the sensors in the
new Activa system come
into operation. They affect
both the selected
temperature, keeping it at a
constant level throughout
the wash cycle, and the
mechanical function of the
drum.
The drum is made to turn at
two different speeds at
crucial moments. When the
detergent enters the
garments, the drum rotates
in such a way that the
detergent is distributed in a
uniform manner; during the...

START DELAY BUTTON
Appliance start time can be
set with this button, delaying
the star by 3, 6 or 9 hours.
Proceed as follow to set a
delayed start:
Select a programme
(“STOP” indicator light blinks)
Press Start Delay button
(each time the button is
pressed the start will be
delayed by 3, 6 or 9 hours
respectively and the
corresponding light will
blink).
Press START to commence
the Start Delay operation
(the indicator light
associated with the
selected Start Delay time
stops blinking and remains
ON).
At...

36
H
EN
SPIN SPEED BUTTON
The spin cycle is very
important to remove as
much water as possible from
the laundry without
damaging the fabrics. You
can adjust the spin speed of
the machine to suit your
needs.
By pressing this button, it is
possible to reduce the
maximum speed, and if you
wish, the spin cycle can be
cancelled.
To reactivate the spin cycle
is enough to press the
button until you reach the
spin speed you would like to
set.
For not damage the fabrics,
it is not possible to increase
the speed...

38
EN
BUTTONS INDICATOR LIGHT
The indicator light around
the option buttons will light
when specific options 
are selected
PROGRAMME SELECTOR WITH
OFF POSITION 
RO
TATES IN BOTH
DIRECTIONS.
THE MACHINE IS
TURNED ON BY
SELECTING A
PROGRAMME VIA  THE
PROGRAMME
SELECTOR.
THIS STATUS WILL BE
INDICATED BY THE STOP
INDICATOR LIGHT
FLASHING, THIS LIGHT
WILL CONTINUE TO
FLASH UNTIL THE
MACHINE HAS STARTED
OR THE MACHINE IS
RETURNED TO THE OFF
POSITION.
Press the Start/Pause
button to start the selected
cycle....