Brother S 7200 Manual

 
 
S-7200A 
4. PREPARATION BEFORE SEWING 
15
2128M 
4-5. Threading the upper thread 
     CAUTION 
 
Turn off the power switch before threading the upper thread.   
The machine may operate if the treadle is depressed by mistake, which could result in injury. 
Turn the machine pulley and raise the thread take-up (1) 
before threading the upper thread.   
This will make threading easier and it will prevent the thread 
from coming out at the sewing start....

 
 
S-7200A 
4. PREPARATION BEFORE SEWING 
16
4-7. Using the thread wiper 
Press the thread wiper switch (1) to the  side. If this is 
done, the thread wiper (2) will operate after the thread is 
trimmed. 
 
 
 
 
 
 
 
 
 
 
 
 
 
4-8. Using the knee lifter 
The presser foot (2) can be raised by pressing the knee lifter 
plate (1). 
 
 
 
 
 
 
 
 
 
 
 
 
2129M 2130M 
2131M 2132M 2209M 

 
 
S-7200A 
5. USING THE OPERATION PANEL (BASIC OPERATIONS) 
17
5. USING THE OPERATION PANEL   
(BASIC OPERATIONS) 
5-1. Names and functions 
• The operation panel keys cannot be operated while sewing is in progress. 
Select the keys and set the number of stitches before starting sewing. 
• In the case of keys with indicators, the indicator illuminates when that function is operating, and the indicator switches off 
when the key is pressed once more....

 
 
S-7200A 
5. USING THE OPERATION PANEL (BASIC OPERATIONS) 
18
 
 (6)  Fixed stitch key 
  
 
 When this key is pressed so that the indicator illuminates, the number of stitches (1−1999) 
in the E stitch number display is sewn, and then the sewing machine stops automatically. 
(7) Name label key 
  
 
 When this key is pressed so that the indicator illuminates, fixed stitch sewing of the number 
of stitches (1−1999) in the E and F stitch number displays is carried out repeatedly. 
(8)  Pleat presser...

 
 
S-7200A 
5. USING THE OPERATION PANEL (BASIC OPERATIONS) 
19
5-2. Sewing start and end backtack stitches 
 
 
 
 
 
 
 
 
 
 
 
 
 
1 Setting start backtack stitches 
 
 
 
 
 
 
 
 
 
 
 
 
2 Setting end backtack stitches 
 
 
 
 
 
 
 
 
 
 
 
 
3 
 
 
 
 
 
 Start backtacking is carried out. After it has finished, normal sewing continues for as long as 
the treadle remains depressed. 
NOTE: 
If the treadle is returned to the neutral position, the sewing machine will continue 
operating until the...

 
 
S-7200A 
5. USING THE OPERATION PANEL (BASIC OPERATIONS) 
20
5-3. Sewing fixed stitches 
 
 
 
 
 
 
 
 
 
 
 
 
1 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
From 1 to 1999 stitches can be set.
2 
 
 
 
 
 After the set number of stitches in E (fixed stitches) have been sewn, the sewing machine 
stops in the needle position that has been set by the needle up/down key (refer to p.24). After 
this, normal sewing is carried out if the treadle is depressed. 
3 
 
 
 
 
 After the thread is trimmed, fixed stitch...

 
 
S-7200A 
5. USING THE OPERATION PANEL (BASIC OPERATIONS) 
21
5-4. Sewing name labels 
 
 
 
 
 
 
 
 
 
1 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
From 1 to 1999 stitches can be set for the E and F stitch numbers.
2 
 
 
 
 
 After the set number of stitches in E (fixed stitches) have been sewn, the needle bar stops in 
the position that has been set by the needle up/down key (refer to p.24). 
3 
 
 
 
 
 After the set number of stitches in F (fixed stitches) have been sewn, the needle bar stops in 
the...

 
 
S-7200A 
5. USING THE OPERATION PANEL (BASIC OPERATIONS) 
22
5-5. Sewing pleat presser stitches 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1  
 
 
 
 
 
 
 
 
 
 
 
 
 
From 1 to 1999 stitches can be set. 
2  
 
 
 
 
 
 If the treadle is continuously depressed and then 
you press the actuator while sewing is in progress, 
the number of backtack stitches set in E is sewn and 
then normal sewing resumes. 
3  
 
 
 
 Thread trimming is carried out. 
 
 
 
 
 
 
 These functions cannot be used. 
 
 
 
 
 
 
 •...

 
 
S-7200A 
5. USING THE OPERATION PANEL (BASIC OPERATIONS) 
23
5-6. Using the lower thread counter 
y The lower thread counter can be used to let you know approximately how much lower thread is remaining. 
y The value displayed by the lower thread counter display is reduced by 1 from the initial setting value each time the sewing 
machine sews 10 stitches, and a warning is given when the counter reaches “-5”. 
 
 
1  
 
 
 
 
 
 
 
 
 
 
(Press for 2 seconds or more) After about 2 seconds, the buzzer...

 
 
S-7200A 
6. USING THE OPERATION PANEL (ADVANCED OPERATIONS) 
24
6. USING THE OPERATION PANEL 
(ADVANCED OPERATIONS) 
The operations described in this section should only be carried out by a technician. 
 
6-1. Names and functions 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
(18) Slow start key 
  
 
 
 
 
 • When this key is pressed so that the slow start icon (19) illuminates, the first two 
stitches sewn after the thread is trimmed are sewn at slow speed (220 rpm). After this,...