Brother S 7200 Manual
Here you can view all the pages of manual Brother S 7200 Manual. The Brother manuals for Sewing Machine are available online for free. You can easily download all the documents as PDF.
Page 2
S-7200A i Thank you very much for buying a BROTHER sewing machine. Before using your new machine, please read the safety instructions below and the explanations given in the instruction manual. With industrial sewing machines, it is normal to carry out work while positioned directly in front of moving parts such as the needle and thread take-up, and consequently there is always a danger of injury that can be caused by these parts. Follow the instructions from training personnel and instructors...
Page 3
S-7200A ii 2. Notes on safety DANGER Wait at least 5 minutes after turning off the power switch and disconnecting the power cord from the wall outlet before opening the face plate of the control box. Touching areas where high voltages are present can result in severe injury. CAUTION Environmental requirements Use the sewing machine in an area which is free from sources of strong electrical noise such as high-frequency welders. Sources of strong electrical noise...
Page 4
S-7200A iii CAUTION Sewing This sewing machine should only be used by operators who have received the necessary training in safe use beforehand. The sewing machine should not be used for any applications other than sewing. Be sure to wear protective goggles when using the machine. If goggles are not worn, there is the danger that if a needle breaks, parts of the broken needle may enter your eyes and injury may result. Turn off the power switch at the following...
Page 5
S-7200A iv 3.Warning labels The following warning labels appear on the sewing machine. Please follow the instructions on the labels at all times when using the machine. If the labels have been removed or are difficult to read, please contact your nearest Brother dealer. 1 2 3 Be sure to connect the ground. If the ground connection is not secure, you run a high risk of receiving a serious electric shock, and problems with correct operation may also occur....
Page 6
S-7200A CONTENTS 1. NAMES OF MAJOR PARTS................ 1 2. MACHINE SPECIFICATIONS .............. 2 3. INSTALLATION ................................... 3 3-1. Table processing diagram .............................. 4 3-2. Installation ...................................................... 4 3-3. Lubrication (-40[], 43[] specifications) ............ 8 3-4. Connecting the cords ..................................... 9 3-4-1. Opening the control box cover............. 9...
Page 7
S-7200A 1. NAMES OF MAJOR PARTS 1 1. NAMES OF MAJOR PARTS (1) Bobbin winder (2) Thread wiper (3) Lifting lever (4) Quick reverse (Actuator) (5) Presser foot (6) Control box (7) Knee lifter assembly (8) Power switch (9) Oil gauge window (-40[], 43[] specifications) (10) Reverse lever (11) Stitch length dial (12) Machine pulley (13) Operation panel (14) Cotton stand...
Page 8
S-7200A 2. MACHINE SPECIFICATIONS 2 2. MACHINE SPECIFICATIONS 4 Quick reverse ○ Thread wiper ○ 0 3 5 Lubrication type Minimum lubrication Semi dry Complete dry S 3 5 Use For light-weight and difficult-to-sew materials For medium- weight materials For heavy-weight materials -43S -45S -453 -403 -433 -405 Max. sewing speed 4,000 rpm 5,000 rpm* 4,500 rpm* Start backtacking and continuous backtacking speed 220–1,800 rpm End backtacking speed 1,800...
Page 9
S-7200A 3. INSTALLATION 3 3. INSTALLATION CAUTION Machine installation should only be carried out by a qualified technician. Contact your Brother dealer or a qualified electrician for any electrical work that may need to be done. The sewing machine weighs more than 50 kg. The installation should be carried out by two or more people. Do not connect the power cord until installation is complete. The machine may operate if the treadle is depressed by mistake, which could...
Page 10
S-7200A 3. INSTALLATION 4 3-1. Table processing diagram y The top of the table should be 40 mm in thickness and should be strong enough to hold the weight and with-stand the vibration of the sewing machine. y Drill holes as indicated in the illustration below. 3-2. Installation 1. Control box (1) Control box (2) Bolts [3 pcs] (3) Nuts [3 pcs] (4) Spring washers [3 pcs] (5) Washers [3 pcs] 2. Connecting rod (6)...