Brother Printers Intellifax 2750 Plain Paper Laser Fax Owners Manual
Here you can view all the pages of manual Brother Printers Intellifax 2750 Plain Paper Laser Fax Owners Manual. The Brother manuals for Fax Machine are available online for free. You can easily download all the documents as PDF.
Page 91
79 Fax Settings and Activity You can print the following lists and reports: 1.XMIT REPORTChoose if you would like a Transmission Verification Report printed after every fax you send. 2.ACT.REPORTActivity Report lists information about the last 50 incoming and outgoing faxes. TX means Transmit; RX means Receive. 3.ALL DIALLists names and numbers stored in One Touch and Speed Dial memory, in numerical order. 4.TEL.INDEXALL DIAL list (above), alphabetically. 5.USER SETTINGSLists settings for INITIAL...
Page 92
80CHAPTER TEN To Print a Report 1Press Function, 7. 2Enter the number (see p. 79) of the report you want to print. For example, press 4 to print the TEL.INDEX. 3Press Start. 4Press Stop to exit. Transmission Verification (Xmit) Report You can use the Xmit Report as proof that you sent a fax. This report lists the time and date of transmission, and whether the transmission was successful. When the feature is OFF, the report is printed automatically only if thereÕs an error during transmission. If the...
Page 93
81 11 CHAPTER ELEVEN Making Copies Using the Fax Machine as a Copier You can use your fax machine as a copy machine, making up to 99 copies at a time. The fax machine can stack the copies or collate (sort) them. Copy Photo Enlarge SortReduce The scannable area of your fax machine begins at approximately one-eighth inch (4 mm) from the edge of the paper. Not Printable 1/8 (4 mm) 1/8 (4 mm)
Page 94
82CHAPTER ELEVEN Making a Single Copy The default resolution for a single copy is AUTO, which you can use for documents containing both text and photographs. You can also select S. Fine and Photo, as needed. 1Insert the document face down in the feeder. 2Press Copy, then wait five secondsÑORÑPress Copy again. Do NOT pull on the paper while copying is in progress. Making Multiple Copies There are two ways to make multiple copies on your fax machine. You can choose whether the copies will be STACKED (all...
Page 95
83MAKING COPIES Reducing and Enlarging Copies 1Insert pages to be copied face-down in the feeder. 2Press Enlarge or Reduce. 3Press or to select AUTO, 200%, 150%, 125%, 120%, 100%, 93%, 87%, 75%, or 50%. 4Press Copy when the screen displays your selection. 5Use the dial pad to enter the number of copies you want (up to 99). 6Wait five secondsÑORÑPress Copy again. Copying a Photograph You can copy a photograph by pressing Photo without pressing Resolution. 1Insert the photo(s) face-down in the feeder....
Page 97
12 CHAPTER TWELVE Optional Accessories (For FAX 2750 Only) 85 Model Name Optional Memory Total fax machine 2750 1 MB 2.3 MB (up to 230 pages) 1.3 MB ÐORÐ (up to 130 pages) 2 MB 3.3 MB (up to 330 pages) Using Brother #1 Chart with MMR coding and Standard Resolution. Memory Board The memory board is installed on the main controller board inside the fax machine. When you add the optional memory board, it increases the performance modes for both fax and printer operations. Optional Memory for the Printer &...
Page 98
86CHAPTER TWELVE Installing the Optional Memory Board 1Unplug the power cord from the AC outlet and disconnect the interface cable. WARNING Unplug the power cord before installing (or removing) the memory board. 2Press down on the top of the rear cover to release the hook, and pull the rear cover out. WARNING Do not touch the surface of the main controller board.
Page 99
87OPTIONAL ACCESSORIES (FOR FAX 2750 ONLY) 3To install the memory board onto the main controller board, use the attached spacer and plug it into the connectors on the left of the main controller board. Spacer Connector Connector Memory Board Main Controller Board WARNING nHold the edge of the memory board. Do not touch the surface of the board. nMake sure the memory board is securely seated in the main controller board. 4Reinstall the rear cover. 5Reconnect the interface cable. 6Plug the power cord into...