Brother Print Server Nc 8100h User Guide

APPENDIX 
 
A-2   
TELNET  
To connect to the Print / Fax server using TELNET on UNIX, 
Windows
® NT®, or most other TCP/IP systems, type: TELNET 
IP address at the command prompt of the system prompt, where 
ipaddress is the IP address of the Print / Fax server. When you 
are connected, push RETURN or ENTER to get the # prompt, 
enter the password access (the password will not appear on 
the screen), and type anything in response to the Enter 
Username> prompt. When you see the Local> prompt, you are...

APPENDIX 
 
A-3 
B 
BAppendix B 
 
Using Services 
 
 
 
 
General 
 
A service is a resource that can be accessed by computers that wish to print to the 
Brother Print / Fax server. The Brother Print / Fax server provides the following 
predefined services (do a SHOW SERVICE command in the Brother Print / Fax 
server remote console to see a list of available services): 
 
Service (Example)  Definition 
BINARY_P1  TCP/IP binary service 
TEXT_P1  TCP/IP text service (adds carriage return after 
each line...

APPENDIX 
 
A-4 
C 
CAppendix C 
 
Reloading the Print / Fax 
Server Firmware
 
 
 
 
General 
 
The firmware on the Print / Fax server is stored in flash memory. This means that 
you can upgrade the firmware by downloading the appropriate update file. To get 
the latest firmware update, access the Brother Solutions web site at 
http://solutions.brother.com/
 
 
The Print / Fax server supports multiple MFC models so when inserted into the 
MFC the version of the NC-8100h hardware is checked against the...

APPENDIX 
 
A-5 
Reloading firmware using BRAdmin 
 
The BRAdmin application can be used to easily re-program your Brother Print / 
Fax server. 
 
1. Start BRAdmin. 
2.  Highlight the appropriate Print / Fax server. Then press select the 
Control menu and choose Load Firmware. You can select more than one 
Print / Fax server by pressing CTRL+ or SHIFT+ on 
each additional Print / Fax server. 
 
There are three possible ways of sending the new software version to the Print / 
Fax server. For whichever...

APPENDIX 
 
A-6 
Reloading using the FTP Protocol 
from a command prompt 
 
 
By specifying the Print / Fax server PASSWORD AS THE USERNAME when 
logging on, it becomes possible to upgrade the firmware of the Print / Fax server 
or printer. The following example assumes that the Print / Fax server password is 
“cambridge” 
 
D:\>ftp 
ftp> open 220.0.250.200 
Connected to 220.0.250.200. 
220 FTP print service:V-1.05/Use the network password for 
the ID if updating. 
User (220.0.250.200:(none)): cambridge...

APPENDIX 
 
A-7 
Reloading using the FTP Protocol 
from a Web Browser  
 
Please visit the Brother Solutions Web site at http://solutions.brother.com
 for 
more information on upgrading the Print / Fax server using a web browser.  

APPENDIX 
 
A-8 
D 
DAppendix D 
 
Specifications and 
Function Table 
 
 
 
Specifications 
 
Operating System Support 
- Windows
® 95/98/98SE/Me/NT® 4.0 and Windows® 2000/XP 
- Unix systems supporting LPD 
- Mac OS8.6-9.1 / OS 10.1 
 
Protocol Support 
- TCP/IP(including the following) 
  RARP, BOOTP, DHCP, NetBIOS, WINS, LPR/LPD, Port9100,  
  SMTP/POP3, SMB(NetBIOS/IP), IPP, FTP, TELNET,  HTTP,  
  SNMP,  
  TFTP 
- IPX/SPX 
- AppleTalk (EtherTalk) 
- DLC/LLC 
 
Network 
- 10/100Base-TX Ethernet...

APPENDIX 
 
A-9  Internet Fax 
- T.37 Simple mode 
- Tiff-F Profile-S 
- Resolution: 200x100, 200x200, 204x98, 204x196dpi 
- Coding System: MH 
- Width: 1728 dot 
- Fax / E-mail / I-Fax Forwarding / Paging feature.  
  (Please check the User Guide for your Brother MFC to verify is this 
feature  
   is available). 
- Internet Fax Relay 
- E-mail Relay 
- Relay Broadcast  
 
Computer Requirements (for drivers, BRAdmin Professional, Peer-to-Peer 
 software, etc.) 
 
- CPU:   Pentium 75MHz or Higher for...

APPENDIX 
 
A-10 
Function Table and Default Factory Settings 
 
Level One Function Level Two Function  Options  Factory Setting 
1.SETUP TCP/IP 1.BOOT METHOD  AUTO/STATIC/RARP/BOOTP/DHCP  AUTO 
   2.IP ADDRESS  [000-255].[000-255].[000-255].[000-255]   192.000.000.192 
   3.SUBNET MASK  [000-255].[000-255].[000-255].[000-255]  000.000.000.000 
   4.GATEWAY  [000-255].[000-255].[000-255].[000-255]  000.000.000.000 
   5.HOST NAME  (up to 15 characters)  BRN_XXXXXX 
     BRN_XXXXXX=(last 6 figures of...

INDEX 
Index-
1 
INDEX 
 
A  
A dd ress B ook ..................................................... .14 -6 
A IX ...................................................................... .12 -3  
A IX  4 .0 ................................................................ .12 -8  
A pp le  T alk .......................................................... .13 -3  
A pp le T alk ......................................................... .13 -1 4 
A R P ...................................................... .1 -1...