Brother Print Server Nc 4100h User Guide

CHAPTER 7 APPLETALK (ETHERTALK) TCP/IP PRINTING
Figure 5  Entering  the I P addre ss an d Queue
Figure 6  Savin g the pr inter to t he De sktop 

CHAPTER 7 APPLETALK (ETHERTALK) TCP/IP PRINTING
7-6
Changing the Configuration
From a Macintosh, the easiest way to change the printer or print server parameters is
to use a web browser.
Simply connect to the printer using the format: http://ip_address
where ip_address is the address of the printer.
PC users can also use the BRAdmin application to change printer and print server
details. 

CHAPTER 7 APPLETALK (ETHERTALK) TCP/IP PRINTING
1.
  Visit 
http:// solutions. brother.com  for more information on ne twork
printing. 

CHAPTER 8 DLC PRINTING
8-1
8
CHAPTER EIGHT
DLC Printing
Printing from Windows NT or
Windows 2000
Overview
DLC is a simple protocol that is included in Windows NT and Windows 2000 as
standard. It can be used on other operating systems (such as Windows 3.x) with the
addition of vendor supplied software that supports the Hewlett-Packard JetDirect
card.
Quick Tips:
1. One way to print the details of all network settings is to print a configuration
page. Refer to the Quick Setup guide for information on how...

CHAPTER 8 DLC PRINTING
8-2
Configuring DLC on Windows NT/2000
To use DLC on Windows NT, you must first install the DLC protocol.
1.
 Log into Windows NT with administrative privileges. Go to the NT Control
Panel and double click on the Network icon. Windows 2000 users select the
properties of the Local Area Connection.
2.
 On Windows NT 3.5x systems, select Add Software. On Windows NT 4.0
systems, click on the Protocol tab, and click Add. Windows 2000 users click
the Install button from the General Tab....

CHAPTER 8 DLC PRINTING
8-3
Windows 2000 Printer Setup
1.
 Log into Windows 2000 with administrative privileges. From the Start
menu, select Settings and then Printers.
2.
 Select Add Printer (If you have already installed a Brother printer driver,
double click the printer driver that you wish to configure and then select
Printers/Properties, select the Ports tab, Click on “Add Port” and continue
from Step 6 (ignoring steps 11-14) about installing the correct driver).
3.
 Click Next.
4.
 Select Local...

CHAPTER 8 DLC PRINTING
8-4
Windows NT 4.0 Printer Setup
Log into Windows NT with administrative privileges. From the Start menu, select
Settings and then Printers.
1.
 Select Add Printer (If you have already installed a Brother printer driver,
double click the printer driver that you wish to configure and then select
Printers/Properties, select the Ports tab and continue from Step 4 (ignoring
steps 9-11) about installing the correct driver).
2.
 Select My Computer and then click Next.
3.
 Select Add a...

CHAPTER 8 DLC PRINTING
8-5
Windows NT 3.5x Setup
1.
 From the Windows NT Main group, double click on the Print Manager icon.
2.
 Select Printer from the menu bar and click on Create Printer.
3.
 Enter any desired name for the printer in the Printer Name box.
4.
 Select the printer model in the Driver menu.
5.
 Choose Other (or Network Printer for V3.1 systems) from the Print to menu.
6.
 Click on Hewlett-Packard Network Port.
7.
 Type in your desired name for the port (this name must not be an existing...

CHAPTER 8 DLC PRINTING
1.  Visit 
http:// solutions. brother.com  for more information on ne twork
printing. 

CHAPTER 9 LAT NETWORK CONFIGURATION
9-1
9
CHAPTER NINE
LAT Network
Configuration
Printing from DEC LAT Systems
Overview
Brother print servers are equipped with the LAT protocol. If you are already familiar
with configuring DEC servers or compatible terminal servers in your network, you
can use similar procedures to configure a Brother print server.
Quick Tips:
1. The default password for Brother print servers is access.
2. If you assign an IP address to the print server, you can use a Web browser or
the...