Brother Print Server Nc 4100h User Guide

CHAPTER 4 NETBIOS PEER-TO-PEER PRINTING
4-7
Adding a Second NetBIOS Print Port
1.
 You do not need to re-run the installation program to add a new NetBIOS
port. Instead, press the Start button, select Settings, and open the Printers
windows. Click on the icon of the printer that you wish to configure, select
File from the Menu bar, and then choose Properties.
Windows 95/98/Me
2.
 Click on the Details tab and push the Add Port button. In the Add Port
dialog, select the Other radio button and then...

CHAPTER 4 NETBIOS PEER-TO-PEER PRINTING
4-8
LAN Server/OS/2 Warp Server
Configuration
As Brother print servers support the SMB protocol over TCP/IP via a NetBIOS
interface, you can easily configure your printer to work with an IBM LAN Server
and OS/2 Warp Server networks that have IBM TCP/IP V2.0 or later installed on the
fileserver. Use the following procedure to configure the LAN Server, OS/2 Warp
Server or OS/2 Warp connect workstation.
Server Configuration:
1.
 Open the Templates folder on the OS/2...

CHAPTER 4 NETBIOS PEER-TO-PEER PRINTING
1.  Visit 
http:// solutions. brother.com  for more information on ne twork
printing. 

CHAPTER 5 BIP INTERNET PRINTING INSTALLATION
5-1
5
CHAPTER FIVE
How to Configure Internet
Printing for Windows 95/98/Me
NT 4.0/Windows 2000
Internet Printing Installation
Overview
Brothers Brother Internet Print (BIP ) software, for Windows 95/98/Me/NT4.0,
allows a PC user at one location, to send a print job to a Brother Printer at a remote
location via the Internet. For example, a user on a PC in New York could print a
document directly from his Microsoft Excel application program to a printer in...

CHAPTER 5 BIP INTERNET PRINTING INSTALLATION
5-2
Brother Internet Print
General Information
The BIP software is installed using a standard Windows 95/98/Me/NT4.0 Installation
Wizard. It creates a virtual port on the Windows 95/98/Me/NT4.0 PC that operates in
a similar way to the standard LPT1 printer port from the Application program point
of view. The user can use the Windows 95/98/MeNT4.0 Print Manager to create a
printer that uses this port along with a standard Windows 95/98/Me, NT4.0-
compatible...

CHAPTER 5 BIP INTERNET PRINTING INSTALLATION
5-3
Brother Internet Print
Configuring the Brother Print Server
The  print server can be configured with BRAdmin configuration utility, by using a
web browser, or by using the TELNET command.
Print Server Configuration Checklist
Before configuring the print server to receive BIP jobs, be sure that the E-mail server
at the remote site (the receiving end) is configured to handle the TCP/IP POP3, and
SMTP protocols (SMTP is only required if the notification...

CHAPTER 5 BIP INTERNET PRINTING INSTALLATION
5-4
Brother Internet Print
Using BRAdmin to Configure the Print
Server
Skip this section if you wish to use the print server remote console or Web Browser
to configure the print server.
Using the BRAdmin utility, you can configure the Brother print server using the
TCP/IP protocol, or the IPX protocol.
The steps required to configure the print server to receive print jobs from a Windows
95/98//Me/NT4.0. PC running the BIP software is as follows:
1.
 Start the...

CHAPTER 5 BIP INTERNET PRINTING INSTALLATION
5-5
3.
 Click on the Internet tab.
4.
 Enter the IP address of the POP3 server (consult your network administrator
if you do not know this address).
5.
 Enter the mailbox name for the remote Brother print server. Usually this will
be the first part of the E-mail address (for example, if the E-mail address of
the print server is emailprinter@xyz, then the mailbox name would be
emailprinter).
6.
 Enter the password for the mailbox, if any.
7.
 The print server...

CHAPTER 5 BIP INTERNET PRINTING INSTALLATION
5-6
Brother Internet Print
Using a Web Browser to configure the
Print Server
1.
 Connect to the printer server IP address using your web browser.
2.
 When you reach the network configuration screen, you will be prompted for
a password. The default password is access
3.
 Select the Configure Internet option and enter the information as described
above. Refer to Using BRAdmin to Configure the Print Server
4.
 You should see a Segmented Message Timeout option. If...

CHAPTER 5 BIP INTERNET PRINTING INSTALLATION
5-7
Brother Internet Print
Using TELNET to Configure the Print
Server
Skip this section if you used BRAdmin or a Web Browser to configure the remote
print server.
As an alternative to BRAdmin, you can use the print server remote console to
configure the print server. The console can be accessed via TELNET. When you
access the print server using these utilities, you will be asked for a password. The
default password is access.
1.
 When you get the Local> prompt...