Brother MFC 8440 User Manual

MAKING COPIES   10 - 15
Make a double-sided copy from a double-sided original
1Press  (Copy) to illuminate it in green. Place the original 
face up in the ADF. 
2Press Duplex/N in 1 and  or  to select 
Duplex(1 in 1) .
Press 
Set.
3Press   or   to select  Portrait2 or Landscape1 .
Press 
Set.
4Press   or   to select  Double Sided for the original.
Press 
Set.
5Press Start.
6Make sure that you have put the original in the ADF as shown 
on the LCD and press 
Start.
7After all the pages of the original...

10 - 16   MAKING COPIES
Duplex (2 in 1) and Duplex (4 in 1) 
(For MFC-8640D, MFC-8840D and MFC-8840DN)
1Press (Copy ) to illuminate it in green. Place the original 
face up in the ADF, or face down on the scanner glass.
2Use the dial pad to enter the number of copies you want 
(up to 99).
3Press Duplex/N in 1 and   or   to select 
Duplex(2 in 1)  or Duplex(4 in 1) .
Press 
Set.
4Press  or  to select  Portrait1, Portrait2 , 
Landscape1  or Landscape2 .
Press 
Set.
5Press Start to scan the original.
If...

MAKING COPIES   10 - 17
Changing the default copy settings
You can adjust the copy settings that are shown in the chart. These 
settings will stay until you change them again.
Quality
1Press Menu, 3, 1.
2Press   or   to select  Text, 
Photo  or Auto .
Press 
Set.
3Press Stop/Exit.
Contrast
You can change the contrast to help an image look lighter or darker.
1Press Menu, 3, 2.
2Press   to make lighter.
— OR —
Press   to make darker.
Press 
Set.
3Press Stop/Exit.
Submenu Menu Selections Options Factory...

11 - 1   IMPORTANT INFORMATION
11
Standard telephone and FCC Notices 
These notices are in effect on models sold and 
used only in the United States.
When programming emergency numbers or making test calls to 
emergency numbers:
■Remain on the line and briefly explain to the dispatcher the 
reason for the call before hanging up.
■ Perform these activities in the off-peak hours, such as early 
morning or late evening.
This equipment complies with Part 68 of the FCC rules and the 
requirements adopted by...

IMPORTANT INFORMATION   11 - 2
If this equipment causes harm to the telephone network, the 
telephone company will notify you in advance that temporary 
discontinuance of service may be required. But if advance notice 
isn’t practical, the telephone company will notify the customer as 
soon as possible. Also, you will be advised of your right to file a 
complaint with the FCC if you believe it is necessary.
The telephone company may make changes in its facilities, 
equipment, operations or procedures...

11 - 3   IMPORTANT INFORMATION
WARNING
This MFC has been certified to comply with FCC standards, which 
are applied to the USA only. A grounded plug should be plugged into 
a grounded AC outlet after checking the rating of the local power 
supply for the MFC to operate properly and safely.
Federal Communications Commission (FCC) 
Declaration of Conformity (USA only)
declares, that the products
Product Name: MFC-8440, MFC-8640D, MFC-8840D and 
MFC-8840DN
comply with Part 15 of the FCC Rules. Operation is...

IMPORTANT INFORMATION   11 - 4
■Call the dealer or an experienced radio/TV technician for help. 
Important
Changes or modifications not expressly approved by Brother 
Industries, Ltd. could void the user’s authority to operate the 
equipment.
Important – about the interface cable
A shielded interface cable should be used to ensure compliance with 
the limits for a Class B digital device.
Industry Canada Compliance Statement 
(Canada only) 
This Class B digital apparatus complies with Canadian ICES-003....

11 - 5   IMPORTANT INFORMATION
Since radiation emitted inside the equipment is completely confined 
within protective housings and external covers, the laser beam 
cannot escape from the MFC during any phase of user operation.
FDA regulations
U.S. Food and Drug Administration (FDA) has implemented 
regulations for laser products manufactured on and after August 2, 
1976. Compliance is mandatory for products marketed in the United 
States. The following label on the back of the MFC indicates 
compliance...

IMPORTANT INFORMATION   11 - 6
Important safety instructions
1Read all of these instructions.
2Save them for later reference.
3Follow all warnings and instructions marked on the product.
4Switch off before cleaning. Do not use liquid or aerosol cleaners. 
Use a damp cloth for cleaning.
5Do not use this product near water.
6Do not place this product on an unstable cart, stand, or table. 
The product may fall, causing serious damage to the product.
7Slots and openings in the cabinet and the back or bottom...

11 - 7   IMPORTANT INFORMATION
13Wait until pages have exited the MFC before picking them up.
14Never push objects of any kind into this product through cabinet 
slots, since they may touch dangerous voltage points or short 
out parts resulting in the risk of fire or electric shock. Never spill 
liquid of any kind on the product. Do not attempt to service this 
product yourself because opening or removing covers may 
expose you to dangerous voltage points and other risks and 
may void your warranty....