Brother HL 8050N User Manual

A - 43   APPENDIXES
EPSON Mode
The following table shows characters that are only available in the matching character set. The numbers 
at the top of the table are hexadecimal code values so that characters will be replaced with the US ASCII 
character set. For other characters, see the US ASCII character set.
 

APPENDIXES   A - 44
 

A - 45   APPENDIXES
IBM Mode
 

APPENDIXES   A - 46
HP-GL Mode
 

A - 47   APPENDIXES
 

APPENDIXES   A - 48
Symbol sets supported by the printer’s intellifont compatible typefaces
* The symbol sets marked with an * are variations of the Roman-8 symbol set.
** LetterGothic 16.66, OCR-A and OCR-B are bitmapped fonts.
PCL Symbol Set Typeface
Set ID Symbol Set
Broug-
hamLetter 
GothicPC 
Tenne-
sseeOklah-
omaGuate-
malaConn-
ecticutCleve-
landMary-
landUtahUtah 
Cond.Antiqu-
e 
Oakla-
ndAlaska 
Mediu-
mPC 
Bruss-
elsLetter
Gothic 
16.66
**OCR-A OCR-B
0D ISO 60 Norwegian 1* 
0F ISO...

A - 49   APPENDIXES
Symbol sets supported by the printer’s TrueTypeTM and Type 1 Font Compatible, 
and original typefaces
* The symbol sets marked with an * are variations of the Roman-8 symbol set.
PCL Symbol Set Typeface
Set ID Symbol SetTenness-
eeHelsinkiBR
SymbolW 
DingbatsAtlanta 
BookCopenha-
genPortugal Calgary Germany San DiegoBermuda 
ScriptUS Roman
0DISO 60 Norwegian 1*  
0FISO 25 French*  
0GHP German*  
0IISO 15 Italian*  
0KISO 14 JIS ASCII* ...

APPENDIXES   A - 50
Quick Reference for Commands
Bar Code Control
The printer can print bar codes in the HP LaserJet, EPSON 
FX-850, and IBM Proprinter XL emulation modes. 
Print bar codes or expanded characters
CodeESC i
Dec27 105
Hex1B 69
Format: ESC i n ... n \
Creates bar codes or expanded characters according to the segment of parameters n ... n. For more 
information about parameters, see the following Definition of Parameters. This command must end with 
the    code (5CH).
Definition of...

A - 51   APPENDIXES
Bar Code, expanded character, line block drawing and box drawing 
n = s0 or S0 3: 1 (default)
n = s1 or S1 2: 1
n = s3 or S3 2.5: 1
This parameter selects the bar code style as above. When the EAN 8, EAN 13, UPC-A, Code 128 or 
EAN 128 bar code mode is selected, this bar code style parameter is ignored. 
Expanded Character
S
0 = White
1 = Black
2 = Vertical stripes
3 = Horizontal stripes
4 = Cross hatch
For example S n1 n2 
n1 = Background fill pattern
n2 = Foreground fill pattern
If...

APPENDIXES   A - 52
Bar code human readable line ON or OFF
n = r0 or R0 Human readable line OFF
n = r1 or R1 Human readable line ON
Preset: Human readable line ON
(1)  T5 or t5
(2)  T6 or t6
(3)  T130 or t130
(4)  T131 or t131
Preset: Human readable line OFF
All others
This parameter shows whether or not the printer prints the human readable line below the bar code.  
Human readable characters are always printed with OCR-B font of 10 pitch and all the current character 
style enhancements are masked. The...