Brother HL 8050N User Manual
Have a look at the manual Brother HL 8050N User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 331 Brother manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
A - 43 APPENDIXES EPSON Mode The following table shows characters that are only available in the matching character set. The numbers at the top of the table are hexadecimal code values so that characters will be replaced with the US ASCII character set. For other characters, see the US ASCII character set.
APPENDIXES A - 48 Symbol sets supported by the printer’s intellifont compatible typefaces * The symbol sets marked with an * are variations of the Roman-8 symbol set. ** LetterGothic 16.66, OCR-A and OCR-B are bitmapped fonts. PCL Symbol Set Typeface Set ID Symbol Set Broug- hamLetter GothicPC Tenne- sseeOklah- omaGuate- malaConn- ecticutCleve- landMary- landUtahUtah Cond.Antiqu- e Oakla- ndAlaska Mediu- mPC Bruss- elsLetter Gothic 16.66 **OCR-A OCR-B 0D ISO 60 Norwegian 1* 0F ISO 25 French* 0G HP German* 0I ISO 15 Italian* 0K ISO 14 JIS ASCII* 0N ISO 8859-1 Latin 1 0S ISO 11 Swedish* 0U ISO 6 ASCII* 1D ISO 61 Norwegian 2* 1E ISO 4 United Kingdom* 1F ISO 69 French* 1G ISO 21 German* 1S HP Spanish* 1U Legal 2K ISO 57 Chinese* 2N ISO 8859-2 Latin 2 2S ISO 17 Spanish* 2U ISO 2 International* 3S ISO 10 Swedish* 4S ISO 16 Portuguese* 5M PS Math 5N ISO 8859-9 Latin 5 5S ISO 84 Portuguese* 5T Windows 3.1 Latin 5 6J Microsoft Publishing 6M Ventura Math 6N ISO 8859-10 Latin 6 6S ISO 85 Spanish* 7J Desk Top 8M Math-8 8U Roman-8 9E Windows 3.1 Latin 2 9J PC-1004 (OS/2) 9T PC Turkish 9U Windows 3.0 Latin 1 10JPS Text 10UPC-8 11UPC-8 D/N 12JMC Text 12UPC-850 13JVentura International 14JVentura US 15UPi Font 17UPC-852 19LWindows Baltic 19UWindows 3.1 Latin 1 26UPC-775 19M Symbol 579L Wingdings 0O OCR-A 1O OCR-B
A - 49 APPENDIXES Symbol sets supported by the printer’s TrueTypeTM and Type 1 Font Compatible, and original typefaces * The symbol sets marked with an * are variations of the Roman-8 symbol set. PCL Symbol Set Typeface Set ID Symbol SetTenness- eeHelsinkiBR SymbolW DingbatsAtlanta BookCopenha- genPortugal Calgary Germany San DiegoBermuda ScriptUS Roman 0DISO 60 Norwegian 1* 0FISO 25 French* 0GHP German* 0IISO 15 Italian* 0KISO 14 JIS ASCII* 0NISO 8859-1 Latin 1 0SISO 11 Swedish* 0UISO 6 ASCII* 1DISO 61 Norwegian 2* 1E ISO 4 United Kingdom* 1FISO 69 French* 1GISO 21 German* 1SHP Spanish* 1ULegal 2KISO 57 Chinese* 2N ISO 8859-2 Latin 2 2SISO 17 Spanish* 2U ISO 2 International* 3SISO 10 Swedish* 4SISO 16 Portuguese* 5MPS Math 5N ISO 8859-9 Latin 5 5SISO 84 Portuguese* 5T Windows 3.1 Latin 5 6JMicrosoft Publishing 6MVentura Math 6N ISO 8859-10 Latin 6 6SISO 85 Spanish* 7JDesk Top 8MMath-8 8URoman-8 9E Windows 3.1 Latin 2 9J PC-1004 (OS/2) 9T PC Turkish 9U Windows 3.0 Latin 1 10JPS Text 10UPC-8 11UPC-8 D/N 12JMC Text 12UPC-850 13J Ventura International 14JVentura US 15UPi Font 17U PC-852 19L Windows Baltic 19U Windows 3.1 Latin 1 26U PC-775 19M Symbol 579L Wingdings 0O OCR-A 1O OCR-B
APPENDIXES A - 50 Quick Reference for Commands Bar Code Control The printer can print bar codes in the HP LaserJet, EPSON FX-850, and IBM Proprinter XL emulation modes. Print bar codes or expanded characters CodeESC i Dec27 105 Hex1B 69 Format: ESC i n ... n \ Creates bar codes or expanded characters according to the segment of parameters n ... n. For more information about parameters, see the following Definition of Parameters. This command must end with the code (5CH). Definition of Parameters This bar code command can have the following parameters in the parameter segment (n ... n). As parameters are effective within the single command syntax ESC i n ... n \, they dont apply in the bar code commands. If certain parameters are not given, they take the preset settings. The last parameter must be the bar code data start (b or B) or the expanded character data start (l or L). Other parameters can be given in any sequence. Each parameter can start with a lower-case or upper-case character, for example, t0 or T0, s3 or S3 and so one. Bar code mode n = t0 or T0 CODE 39 (default) n = t1 or T1 Interleaved 2 of 5 n = t3 or T3 FIM (US-Post Net) n = t4 or T4 Post Net (US-Post Net) n = t5 or T5 EAN 8, EAN 13, or UPC A n = t6 or T6 UPC E n = t9 or T9 Codabar n = t12 or T12 Code 128 set A n = t13 or T13 Code 128 set B n = t14 or T14 Code 128 set C n = t130 or T130 ISBN (EAN) n = t131 or T131 ISBN (UPC-E) n = t132 or T132 EAN 128 set A n = t133 or T133 EAN 128 set B n = t134 or T134 EAN 128 set C This parameter selects the bar code mode as shown above. When n is t5 or T5 the bar code mode (EAN 8, EAN 13, or UPC A) varies according to the number of characters in the data.
A - 51 APPENDIXES Bar Code, expanded character, line block drawing and box drawing n = s0 or S0 3: 1 (default) n = s1 or S1 2: 1 n = s3 or S3 2.5: 1 This parameter selects the bar code style as above. When the EAN 8, EAN 13, UPC-A, Code 128 or EAN 128 bar code mode is selected, this bar code style parameter is ignored. Expanded Character S 0 = White 1 = Black 2 = Vertical stripes 3 = Horizontal stripes 4 = Cross hatch For example S n1 n2 n1 = Background fill pattern n2 = Foreground fill pattern If S is followed by only one parameter, the parameter is a foreground fill pattern. Line block drawing & box drawing S 1 = Black 2 = Vertical stripes 3 = Horizontal stripes 4 = Cross hatch Bar Code n = mnnn or Mnnn (nnn = 0 ~ 32767) This parameter shows the bar code width. The unit of nnn is a percentage.
APPENDIXES A - 52 Bar code human readable line ON or OFF n = r0 or R0 Human readable line OFF n = r1 or R1 Human readable line ON Preset: Human readable line ON (1) T5 or t5 (2) T6 or t6 (3) T130 or t130 (4) T131 or t131 Preset: Human readable line OFF All others This parameter shows whether or not the printer prints the human readable line below the bar code. Human readable characters are always printed with OCR-B font of 10 pitch and all the current character style enhancements are masked. The factory setting is determined by the bar code mode selected by t or T. Quiet zone n = onnn or Onnn (nnn = 0 ~ 32767) Quiet zone is the space on both sides of the bar codes. Its width can be shown using the units that are set by the u of U parameter. (For the description of u or U parameter, see the next section.) The factory setting of the quiet-zone width is 1 inch. Bar code, expanded character unit, line block drawing and box drawing n = u0 or U0 mm (preset) n = u1 or U1 1/10 n = u2 or U2 1/100 n = u3 or U3 1/12 n = u4 or U4 1/120 n = u5 or U5 1/10 mm n = u6 or U6 1/300 n = u7 or U7 1/720 This parameter shows the measurement units of X-axis offset, Y-axis offset, and bar code height. Bar code, expanded character, line block drawing and box drawing offset in X-axis n = xnnn or Xnnn This parameter shows the offset from the left margin in the u- or U-specified unit. Bar code & expanded character offset in Y-axis n = ynnn or Ynnn This parameter shows the downward offset from the current print position in the u- or U-specified unit.