Brother HL 8050N User Manual

							X   
Safety Information
IMPORTANT - For Your Safety
To ensure safe operation the three-pin plug supplied must be inserted only into a standard three-pin power 
outlet/socket which is properly grounded/earthed through the normal standard wiring. 
Extension cords should not be used with the equipment. If it is essential that an extension cord has to be used, it 
must be a three-pin plug type and correctly wired to provide proper grounding/earthing. Incorrectly wired extension 
cords may cause personal injury and equipment damage.
The fact that the equipment operates satisfactorily does not imply that the power is grounded/earthed and that the 
installation is completely safe. For your safety, if in any doubt about the effective grounding/earthing of the power, 
call a qualified electrician. 
This product should be connected to an AC power source within the range indicated on the rating label. DO NOT 
connect it to a DC power source. If you are not sure, contact a qualified electrician.
Disconnect device
This printer must be installed near an AC power outlet/socket that is easily accessible. In case of emergencies, you 
must disconnect the power cord from the power outlet/socket to shut off the power completely.
Caution for batteries
Do not replace the battery. There is a danger of explosion if the battery is incorrectly replaced. Do not disassemble, 
recharge or dispose of in a fire. Used batteries should be disposed of according to local regulations.
LAN Connection
Caution:Connect this production to a LAN connection which is not subjected to over-voltages.
 
						

							 XI
For Europe and Other Countries 
Brother Numbers
IMPORTANT: For technical and operational help, you must call the country where you bought the printer. 
Calls must be made from within that country. 
Register your product
By registering your product with Brother, you will be recorded as the original owner of the product.
Your registration with Brother:
■may serve as a confirmation of the purchase date of your product should you lose your receipt;
■may support an insurance claim by you in the event of product loss covered by insurance; and,
■will help us notify you of enhancements to your product and special offers.
Please complete the Brother Warranty Registration or, for your convenience and most efficient way to 
register your new product, register on-line at
http://www.brother.com/registration/
FAQs (Frequently asked questions)
The Brother Solutions Center is our one-stop resource for all your printer needs. You can download the latest 
drivers, software and utilities and read FAQs and troubleshooting tips to learn how to get the most from your 
Brother product.
http://solutions.brother.com
You can check here for the Brother driver updates.
Customer Service
In Europe:Visit www.brother.com
 for contact information on your local Brother office. 
Service center locations (Europe)
For service center in Europe, contact your local Brother office. Address and telephone contact information or 
European offices can be found at www.brother.com
 and selecting your country from the pull down list.
Internet Addresses
Brother Global Web Site:  http://www.brother.com
For Frequently Asked Questions (FAQs), Product Support and Technical Questions, and Driver Updates and 
Utilities:  http://solutions.brother.com
(In USA only) For Brother Accessories & Supplies:  http://www.brothermall.com
 
						

							
XII   
Regulations 
International ENERGY STAR® Compliance Statement
The purpose of the International ENERGY STAR® Program is to promote the development and popularization of 
energy-efficient office equipment.
As an E
NERGY STAR® Partner, Brother Industries, Ltd. has  determined that this product meets the ENERGY STAR® 
guidelines for energy efficiency.
Laser Notices
Laser Safety (100 - 127 V Model Only)
This printer is certified as a Class I  laser product under the U.S. Departme nt of Health and Human Services (DHHS) 
Radiation Performance Standard according to the Radiation Control for Health and Safety Act of 1968. This means 
that the printer does not produce hazardous laser radiation.
Since radiation emitted inside the printer is completely co nfined within protective housings and external covers, the 
laser beam cannot escape from the machine during any phase of user operation.
FDA Regulations (100  - 127 V Model Only)
U.S. Food and Drug Administration (FDA) has implemented  regulations for laser products manufactured on and 
after August 2, 1976. Compliance is mandatory for produc ts marketed in the United States. The label shown on 
the back of the printer indicates compliance with the FDA regulations and must be attached to laser products 
marketed in the United States.
Caution: Use of controls, adjustments or the performance of pr ocedures other than those specified in this manual 
may result in hazardous radiation exposure.
IEC 60825 Specification ( 220 - 240 V Model Only)
This printer is a Class 1 laser produc t as defined in IEC 60825 specificatio ns. The label shown below is attached 
in countries where required.
This printer has a Class 3B Laser Diode  that emits invisible laser radiation in the Scanner Unit. The Scanner Unit 
should not be opened under any circumstances. MANUFACTURED:
BROTHER INDUSTRIES, LTD.
15-1 Naeshiro-cho, Mizuho-ku, Nagoya, 467-8561 Japan
This product complies with FDA radiation performance standards, 21 CFR Subchapter J.
CLASS 1 LASER PRODUCT
APPAREIL À LASER DE CLASSE 1
LASER KLASSE 1 PRODUKT
 
						

							 XIII
Caution:Use of controls, adjustments or the performance of procedures other than those specified in this manual 
may result in hazardous radiation exposure.
For Finland and Sweden
LUOKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
Varoitus! Laitteen käyttäminen muulla kuin tässä käyttöohjeessa mainitulla tavalla saattaa altistaa käyttäjän 
turvallisuusluokan 1 ylittävälle näkymättömälle lasersäteilylle. 
Varning - Om apparaten används på annat sätt än i denna Bruksanvisning specificerats, kan användaren utsättas 
för osynlig laserstrålning, som överskrider gränsen för laserklass 1.
Internal laser radiation
Max. Radiation Power  5 mW
Wave Length 770 nm-800 nm
Laser Class  Class IIIb (Accordance with 21 CFR Part 1040.10)
Safety Information
IMPORTANT - For Your Safety
To ensure safe operation the three-pin plug supplied must be inserted only into a standard three-pin power 
outlet/socket which is properly grounded/earthed through the normal standard wiring. 
Extension cords should not be used with the equipment. If it is essential that an extension cord has to be used, it 
must be a three-pin plug type and correctly wired to provide proper grounding/earthing. Incorrectly wired extension 
cords may cause personal injury and equipment damage.
The fact that the equipment operates satisfactorily does not imply that the power is grounded/earthed and that the 
installation is completely safe. For your safety, if in any doubt about the effective grounding/earthing of the power, 
call a qualified electrician. 
This product should be connected to an AC power source within the range indicated on the rating label. DO NOT 
connect it to a DC power source. If you are not sure, contact a qualified electrician.
Disconnect device
This printer must be installed near an AC power outlet/socket that is easily accessible. In case of emergencies, you 
must disconnect the power cord from the power outlet/socket to shut off the power completely.
Caution for batteries
Do not replace the battery. There is a danger of explosion if the battery is incorrectly replaced. Do not disassemble, 
recharge or dispose of in a fire. Used batteries should be disposed of according to local regulations.
Opmerking / Oplaadbare Batterij Recycle Informatie (For Netherlands Only)
Bij dit product zijn batterijen geleverd. Wanneer deze leeg zijn, moet u ze niet weggooien maar 
inleveren als Klein Chemisch Afval.
 
						

							XIV   
Radio Interference (220 - 240 V Model Only)
This printer complies with EN55022 (CISPR Publication 22)/Class B.
IT power system (For Norway Only)
This product is also designed for IT power system with Phase to phase voltage 230V.
LAN Connection
Caution: Connect this production to a LAN connection which is not subjected to over-voltages.
Wiring Information (For U.K. only)
Important
If you need to replace the plug fuse, fit a fuse that is approved by ASTA to BS1362 with the same rating as the 
original fuse.
Always replace the fuse cover. Never use a plug with the cover removed.
WARNING - THIS PRINTER MUST BE PROPERLY EARTHED.
The wires in the mains cord are colored in accordance with the following code:
Green and yellow: Earth
Blue: Neutral
Brown: Live
If in any doubt, contact a qualified electrician.
 
						

							 XV
“EC” Declaration of Conformity under the R & TTE Directive
Manufacturer
Brother Industries Ltd.,
15-1, Naeshiro-cho, Mizuho-ku,
Nagoya 467-8561, Japan
Herewith declare that:
Product description : Laser Printer
Product Name : HL-8050N
is in conformity with provisions of the R & TTE Directive (1999/5/EEC 2002) and we declare compliance with the 
following standards:
R&TTE: EN300330-2 V1.1.1
EN301489-3 V1.3.1
CE0682
Safety: EN60950:2000
EMC: EN55022:1998 A1:2000  Class B
EN55024:1998
EN61000-3-2:1995 + A14:2000
EN61000-3-3:1995
Year in which CE marking was First affixed: 2003
Issued by : Brother Industries, Ltd.
Date : 7 July, 2003
Place : Nagoya, Japan
Signature :
Takashi Maeda
Manager
Quality Management Group
Quality Management Dept.
Information & Document Company
!
 
						

							XVI   
Introduction
Thank you for purchasing the HL-8050N. This guide contains important information about the printer operation and 
precautions to be followed. To help you use it efficiently, please read this guide before using your new printer.
Furthermore, after you read the guide, store it in a safe place. It will be useful in case you forget how to perform 
operations or if a problem occurs with the printer.
This guide is written for users who are familiar with the personal computers, operating systems, and software 
compatible with this printer. For operational procedures and information regarding these items, refer to the 
documentation provided with the various hardware and software that you are using.
Brother Industries Ltd.
 
						

							 XVII
How to Use This Guide
Conventions
The following conventions and symbols are used in this User’s Guide:
Conventions and Symbols used in this User’s Guide
Example Meaning
Alerts you to an important operating procedure that should be performed with care. 
Make sure that you read these items.
Notes provide you with useful information.
See Control Panel 
Overview on page 4-1.A cross reference to another section in this User’s Guide. If you are reading the 
Adobe Acrobat PDF file on screen, you can click on the italicized t e x t  t o  j u m p  t o  t h e  
other location.
Indicates that the item referred to is in another guide (such as the Quick Setup 
Guide).
Key Indicates a key on the keyboard of your computer.
Example: Press the Enter key
boldIndicates a window, dialog box, or tab element or button displayed on the computer 
screen. 
Also indicates a menu or value displayed on the printer’s control panel.
Example: Click OK in the Properties dialog box. 
Set Enabled on the control panel.
LCD display fontIndicates a message displayed on the printers control panel. 
This may also emphasize a part name or important information to be entered.
Example:READY appears. 
ENTER 0.0.0.0
Press the Set or + button 
once.Indicates a control panel button. 
Example: Press the 
+ button.
Press the Set button.
+ Indicates that you need to press 2 keys or control panel buttons at the same time. 
Example: Press the + + - buttons.
 
						

							XVIII   
Special Features of This Printer
This printer has the following special features:
■With its up to 1,200 x 1,200 dpi resolution, it can print high quality documents and images.
■Attains high-speed printing of up to 34/35 pages per minute (ppm) when printing the same 
A4/Letter-sized document.
■You can load envelopes, labels, transparencies and paper of various sizes, from A6 to Legal, in all 
the paper trays including the two optional lower tray units. Paper tray 1 holds up to 150 sheets and 
paper tray 2 holds up to 550 sheets.
■Two optional lower tray units (two LT-8000) are available (A4/Letter - 550 sheets each). By adding 
both optional lower tray units, you can expand the total paper tray input capacity to up to 1,800 
sheets.
■By adding the optional duplex unit (DX-8000), you can have automatic 2 sided printing.
■By adding the optional offset catch tray (CT-8000) you can print up to 500 sheets offset., which 
expands the total output capacity to up to 1,000 sheets.
The following illustration shows the printer with the optional offset catch tray (CT-8000) and the two 
optional lower tray units (two LT-8000) installed.
 
						

							 XIX
Safety Precautions
To ensure the safe operation of your printer, make sure that you read this section thoroughly before use.
This section describes the conventions used in the guide.
Installing and Relocating your Printer
Do not place the printer in a hot, humid, dusty, or poorly ventilated environment. Prolonged 
exposure to such adverse conditions can cause fire or electric shocks.
Do not place the printer near heaters or volatile, flammable, or combustible materials, such 
as curtains.
Place the printer on a level, sturdy surface that can withstand the printers weight.  Failure 
to do so could cause the printer to fall, resulting in injuries.
To prevent injuries, use two people when you lift this printer.Indicates warning that must be observed to prevent possible personal injury.
Indicates caution that must be observed to use the printer properly or prevent 
damage to the printer.
This symbol alerts you to procedures that require 
close attention. Make sure that you read and follow the 
instructions carefully.
This symbol alerts you to prohibited procedures. 
Make sure that you read the instructions carefully.
This symbol alerts you to procedures that need to be 
performed. Make sure that you perform the procedure 
after reading the instructions carefully.
WARNING
CAUTION
High 
temperatureFlammable
Electrical 
shockFinger injure
Do not
touch No naked/
open flame Prohibited
Do not 
dismantle
Ground/Earth
Remove the 
plug Hint
CAUTION