Brother Hl 5380dn User Manual

							Driver and Software
51
3
„Paper/Quality tab
Choose the Paper Source.
„Paper Source
You can choose Automatically Select, Auto Select, Tray1, Tray2
1, Tray31, MP Tray or Manual 
Feed.
1Tray2 and Tray3 are options.
 
						

							Driver and Software
52
3
Advanced options3
aChoose the Paper Size and Copy Count(1).
„Paper Size
From the drop-down box choose the Paper Size you are using. 
„Copy Count
The copy selection sets the number of copies that will be printed. 
bSet the Scaling and True Type Font settings (2).
„Scaling
Specifies whether to reduce or enlarge documents, and by what percentage. 
„True Type Font
Specifies the TrueType font options. Click Substitute with Device Font (the default) to use 
equivalent printer fonts for printing documents that contain TrueType fonts. This will permit faster 
printing; however, you might lose special characters not supported by the printer font. Click 
Download as Softfont to download TrueType fonts for printing instead of using printer fonts.
2 1
 
						

							Driver and Software
53
3
cYou can change settings by choosing a setting in the Printer Features list (3):
„Print Quality
You can choose the following print quality settings.
„1200 dpi
„HQ 1200
„600 dpi
„300 dpi
„Media Type
You can use the following types of media in your printer. For the best print quality, select the type of 
media that you wish to use.
„Secure Print
Secure Print allows you to secure documents that are password protected when they are sent to the 
printer. Only the people who know the password will be able to print them. Since the documents are 
secured at the printer, you must enter the password using the control panel of the printer. The secured 
document must have a Password and Job Name. (For more information about the Secure Print 
function, See Printing Secure data on page 86.)
„Password
Choose the password for your secured document that you send to the machine from the drop-down 
box. 
„Job Name
Choose the Job name from the drop-down list for your secured document.  Plain Paper Thin Paper Thick Paper Thicker Paper Bond Paper
Env. Thick Env. Thin Recycled Paper Envelopes Transparencies
3
 
						

							Driver and Software
54
3
„Toner Save
You can conserve toner use with this feature. When you set Toner Save mode to On, print appears 
lighter. The default setting is Off. 
Note • We do not recommend Toner Save for printing Photo or Greyscale images.
•Toner Save mode is not available for 1200 dpi or HQ 1200 resolution.
 
„Sleep Time
When the printer does not receive data for a certain period of time, it enters sleep mode. In sleep 
mode, the printer acts as though it were turned off. When you choose Printer Default the timeout 
setting will be 1 minute.
While the printer is in sleep mode, Back light is off, the LCD shows SLEEP, but the printer can still 
receive data. Receiving a print file or document or pressing Go will automatically wake up the printer 
to start printing.
For more information about Sleep Time setting change, please visit the product page at 
http://solutions.brother.com/
 and see Information.
„Halftone Screen Lock
Stops other applications from modifying the Halftone settings. The default setting is On.
„High Quality Image Printing
You can get high quality image printing. If you set High Quality Image Printing to On, the printing 
speed will be slower.
„Reduce Paper Curl
If you choose this setting, the paper curl may be reduced. If you are printing only a few pages, you do 
not need to choose this setting. We recommend that you change the printer driver setting in Media 
Type to a thin setting.
 
						

							Driver and Software
55
3
„Improve Toner Fixing
If you choose this setting, the toner fixing on paper may be improved. If this selection does not provide 
enough improvement, select Thicker Paper in Media Type settings.
„Density Adjustment
Increase or decrease the print density.
 
						

							Driver and Software
56
3
Features in the printer driver (for Macintosh)3
This printer supports Mac OS X 10.3.9 or greater.
Note The screens in this section are based on Mac OS X 10.5. The screens on your Macintosh will vary 
depending on your operating system.
 
Choosing page setup options3
You can set the Paper Size, Orientation and Scale.
aFrom an application such as Apple TextEdit, click File, then Page Setup. Make sure HL-XXXX (where 
XXXX is your model name.) is chosen in the Format for pop-up menu. You can change the settings for 
Paper Size, Orientation and Scale, then click OK.
bFrom an application such as Apple TextEdit, click File, then Print to start printing.
„For Mac OS X 10.3 and 10.4.
 
						

							Driver and Software
57
3
„For Mac OS X 10.5
For more page setup options, click the disclosure triangle beside the Printer pop-up menu.
Choosing printing options 3
To control special printing features, choose the options in the Print dialog box.
 
						

							Driver and Software
58
3
Cover Page3
You can make the following cover page settings:
„Print Cover Page
If you want to add a cover page to your document, use this function.
„Cover Page Type
Choose a template for the cover page.
„Billing Info
If you want to add the billing information to the cover page, enter text in the Billing Info box.
Paper Feed 3
You can choose Auto Select, Tray1, Tray21, Tray31, MP Tray2 or Manual, and specify separate trays for 
printing the first page and for printing from the second page onwards.
1Tray2 and Tray3 are options.
2The printer automatically turns on the Manual Feed mode when you put paper in the Multi-purpose Tray. 
 
						

							Driver and Software
59
3
Layout3
„Pages per Sheet
Choose how many pages will appear on each side of the paper.
„Layout Direction
When you specify the pages per sheet, you can also specify the direction of the layout.
„Border
If you want to add a border, use this function.
„Two-sided
See Duplex Printing on page 65.
„Reverse Page Orientation (For Mac OS X 10.5)
Check Reverse Page Orientation to reverse the data from up to down. 
 
						

							Driver and Software
60
3
Secure Print3
Secure documents are documents that are password protected when they are sent to the printer. Only the 
people who know the password will be able to print them. Since the documents are secured at the printer, 
you must enter the password using the control panel of the machine to print them.
If you want to create a secure print job, check the Secure Print. Enter a user name, job name and password, 
then click Print. 
(For more information about the Secure Print function, see Printing Secure data on page 86.)
Note Check the Secure Print check box if you want to prevent other people from printing your data.