Brother Hl 4150cdn User Manual

Control Panel 75
3
Network for HL-4150CDN users3
1### means a number within the range of 000 to 255. On connection to the network, if the machines Boot Method is Auto the machine will attempt 
to automatically set the IP address and Subnet Mask from a boot server such as DHCP or BOOTP. If a boot server cannot be found,  an APIPA 
IP address will be allocated, such as 169. 254. [001-254]. [000-255]. If the Boot Method of the machine is set to Static yo u will need to manually 
enter an IP address from the...

Control Panel 76
3
Network for HL-4570CDW(T) users
Submenu 1 Submenu 2 Menu Selections OptionsDescriptions
Wired LAN TCP/IP Boot Method Auto*/Static/ RARP/
BOOTP/ DHCP  Chooses the IP method that best 
suits your needs.
IP Address ###.###.###.### (000.000.000.000)*
1
Enter the IP address.
Subnet Mask ###.###.###.### (000.000.000.000)*
1
Enter the Subnet mask.
Gateway ###.###.###.### (000.000.000.000)*
1
Enter the Gateway address.
IP Boot Tries 0/ 1/2 /3 *.../ 32767 Specifies the number of setting 
trials...

Control Panel 77
3
WLAN TCP/IP Boot MethodAuto*/Static/ RARP/
BOOTP/ DHCP  Chooses the IP method that best 
suits your needs.
IP Address ###.###.###.### (000.000.000.000)*
1
Enter the IP address.
Subnet Mask ###.###.###.### (000.000.000.000)*
1
Enter the Subnet mask.
Gateway ###.###.###.### (000.000.000.000)*
1
Enter the Gateway address.
IP Boot Tries 0/ 1/2 /3 *.../ 32767 Specifies the number of setting 
trials when the Boot Method 
allows automatic IP setting.
APIPA On*/Off Automatically allocates the...

Control Panel 78
3
1### means a number within the range of 000 to 255. On connection to the network, if the machines Boot Method is Auto the machine will attempt 
to automatically set the IP address and Subnet Mask from a boot server such as DHCP or BOOTP. If a boot server cannot be found,  an APIPA 
IP address will be allocated, such as 169. 254. [001-254]. [000-255]. If the Boot Method of the machine is set to Static yo u will need to manually 
enter an IP address from the machines control panel.
Reset...

Control Panel 79
3
Color Correction3
SubmenuMenu Selections Options Descriptions
Frequency Normal*/Low/ Off Sets the interval time you want to 
carry out the auto color correction
ColorCalibration Calibrate Carries out calibration to revise the 
colors. (See Color Calibration  
on page 82.)
Reset Sets the calibration parameters back 
to the default settings. (See Color 
Calibration  on page 82.)
Auto Regist. Registration Adjusts the print position of each 
color automatically. (See Auto 
Registration  on...

Control Panel 80
3
Direct Print3
SubmenuMenu Selections Options Descriptions
Paper Size Letter*/Legal/ A4/
Executive/ JIS B5/B5/
A5/ A5 L/ JIS B6/ B6/A6/
Folio  Sets the size of paper for direct print.
Media Type Plain Paper*/
Thick Paper/
Thicker Paper/
Thin Paper/
Recycled Paper /
Bond Paper/
Glossy Paper  Sets the type of paper for direct print.
Multiple Page 1in1*/2in1/ 4in1/9in1/
16in1/ 25in1/
1 in 2x2 pages /
1 in 3x3 pages /
1 in 4x4 pages /
1 in 5x5 pages  Sets the pattern if you want to print...

Control Panel 81
3
Default settings3
The machine has three levels of default settings; the default settings have been set at the factory before 
shipment (see Menu table on page 70).
 Network default settings
 Factory reset
 Settings reset
Note
• You cannot modify the preset default settings.
• Page counter can never be changed.
 
Network default settings3
If you want to reset only the print server back to its default settings (by resetting all network information such 
as the password and IP...

Control Panel 82
3
Color Calibration3
The output density for each color may vary depending on the environment the machine is in, such as 
temperature and humidity. Calibration helps you to improve the color density.
Note
If you print using the Windows® printer driver, the driver will get the calibration data automatically if both 
Use Calibration Data  and Get Device Data Automatically are on. The default settings are on. See 
Color Calibration  on page 38.
If you print using the Macintosh printer...

Control Panel 83
3
Manual Registration3
When you manually set the color registration, you need to print the color registration chart. Then you are 
required to set parameters to the machine in accordance with the instruction of the color registration chart.
Print Chart3
You can print the color registration chart to manually check the registration of the colors.
aPress + or - to choose  Color Correction . Press OK.
bPress +  or - to choose  Manual Regist. . Press OK.
cPress +  or - to choose  Print Chart...

84
4
4
This machine has the following optional accessories. You can increase the capabilities of the machine with 
these items.
1HL-4570CDWT is equipped with the lower tray as standard equipment.
Lower tray (LT-300CL)4
One optional lower tray (Tray 2) can be installed, and the lower tray can hold up to 500 sheets of 80 g/m2 
(21 lb) paper. When the optional tray is installed, the machine can hold up to 800 sheets of plain 80 g/m
2 
(21 lb) paper. If you want to buy the optional lower tray unit, call the...