Brother Hl 4150cdn User Manual

Driver and Software 55
2
Reverse Print  (Mac OS X 10.4.11 only)
Check  Reverse Print  to rotate the data by 180 degrees.
Advanced  tab
 
Color Mode
You can change the color mode as follows:
• Normal
This is the Default color mode.
• Vivid
The color of all elements are adjusted to become a more vivid color.
• None
 Enhance Black Printing
If a black graphic cannot be printed correctly, choose this setting.
 Improve Gray Color
You can improve the image quality of shaded areas by checking the  Improve...

Driver and Software 56
2
If you are printing only a few pages, you do not need to choose this setting. We recommend that you 
change the printer driver setting in Media Type to a thin setting.
Note
This operation makes the temperature of the machine’s fusing process lower.
 
•Improve Toner Fixing
If you choose this setting, the toner fixing on paper may be improved. If this selection does not provide 
enough improvement, change the printer driver setting in  Media type to a thick setting.
Note
This...

Driver and Software 57
2
Manual Duplex Printing2
For Mac OS X 10.4.11
aSelect  Paper Handling.
bChoose  Reverse  (for MP tray) or  Normal (for Tray 1 and Tray 2) in Page Order. Then choose 
Even numbered pages  and click Print.
 
cReload printed paper into the tray with the blank side facing up (for MP tray) or facing down (for Tray 
1 and Tray 2).
dChoose  Normal in Page Order. Then choose Odd numbered pages  and click Print.
 For Mac OS X 10.5.x and 10.6.x
aSelect  Paper Handling.
bChoose  Reverse...

Driver and Software 58
2
Automatic Duplex Printing2
For Mac OS X 10.4.11
aSelect  Layout .
bChoose  Long-edged binding  or Short-edged binding  in Two-Sided. 
cSelect Paper Handling.
dChoose  All Pages  and click Print. 
 

Driver and Software 59
2
For Mac OS X 10.5.x and 10.6.x
aSelect  Layout .
bChoose  Long-edge binding  or Short-edge binding  in Two-Sided . Automatically the Two-Sided  
check box is checked.
 
cSelect  Paper Handling.
dChoose  All pages  in Pages To Print  and click Print. You can print pages on both sides of the paper. 
 

Driver and Software 60
2
Status Monitor2
This reports the machine status (any errors that may happen with the machine) when printing. If you would 
like to turn Status Monitor on, follow these steps: For Mac OS X 10.4.11
aRun the  Printer Setup Utility  (from the Go menu, choose  Applications, Utilities ), then choose the 
machine.
bClick the Utility , then Status Monitor will start up.
 For Mac OS X 10.5.x
aRun the System Preferences , select Print & Fax, then choose the machine.
bClick the Open Print...

Driver and Software 61
2
Uninstalling the printer driver2
You can uninstall the printer driver that you have installed with the following steps.
Note
• This is not available if you installed the printer driver from the Windows Add printer1 function.
• After uninstalling, we recommend that you restart your computer to remove files that were in use during  the uninstall.
1Add a printer  for Windows® 7 and Windows Server® 2008 R2 users 
Printer driver for Windows®2
aClick the Start button, point to  All...

62
3
3
Control panel3
This machine has one back lit Liquid Crystal Display (LCD), seven buttons and two Light Emitting Diodes 
(LEDs) on the control panel. The LCD is a two-line, 16 characters per line display and can be tilted up to a 
vertical position. You can adjust the angle of the LCD by tilting it up or down.
 
The illustration is based on HL-4570CDW.
Control Panel3
 

Control Panel 63
3
Buttons 3
You can control the basic machine operations and change various printer settings with seven buttons (Go, 
Cancel , Secure,  +, -, Back , OK ).
Go3
You can pause printing by pressing  Go. Pressing Go  again restarts the print job. During a pause, the machine 
is offline.
Pressing  Go allows you to choose the displayed option in the last menu level. After changing a setting, the 
machine returns to the Ready state. 
If Data remains in the machine memory, pressing  Go will print...

Control Panel 64
3
Cancel3
You can cancel the processing or printing of data by pressing Cancel. The LCD shows Cancel printing. 
until the job is canceled. To delete all jobs, press  Cancel for about 4 seconds until the LCD shows 
Job Cancel (All) and then release it.
After canceling the job, the machine returns to the Ready state.
Pressing  Cancel will exit the control panel menu and return the machine to the Ready state.
Secure3
If you want to print secure data protected by a password, press  Secure....