Brother Hl 4070cdw User Manual
Have a look at the manual Brother Hl 4070cdw User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 331 Brother manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Control Panel 92 4 Manual Registration4 Print Chart4 You can print the color registration chart to manually check the registration of the colors. aPress the + or - key to choose Color Correction. Press OK. Select ab or OK Machine Info. h Select ab or OK Color Correction bPress the + or - key to choose Manual Regist.. Press OK. Color Correction Manual Regist. cPress OK. Manual Regist. Print Chart Set Registration4 You can correct the color registration manually. aPress the + or - key to choose Color Correction. Press OK. Select ab or OK Machine Info. h Select ab or OK Color Correction bPress the + or - key to choose Manual Regist.. Press OK. Color Correction Manual Regist. cPress the + or - key to choose Set Registration. Press OK again. Manual Regist. Set Registration dTo set the color registration, follow the instruction on Color Registration Chart. ePress OK.
93 5 5 This printer has the following optional accessories. You can increase the capabilities of the printer with these items. Lower tray (LT-100CL) (HL-4050CDN / HL-4070CDW only )5 One optional lower tray (Tray 2) can be installed, and the lower tray can hold up to 500 sheets of 80 g/m2 (20 lb) paper. When the optional tray is installed, the printer can hold up to 800 sheets of plain 80 g/m 2 (20 lb) paper. If you want to buy the optional lower tray unit, call the dealer you bought the printer from or Brother Customer Service. For setup, see the Users Guide that we have supplied with the lower tray unit. Options5 Lower tray (HL-4050CDN/HL-4070CDW only)SO-DIMM memory LT-100CL See Lower tray (LT-100CL) (HL-4050CDN / HL-4070CDW only) on this page.See SO-DIMMon page 94.
Options 94 5 SO-DIMM5 The printer has 64 MB of standard memory and one slot for optional memory expansion. You can expand the memory up to 576 MB by installing a Dual In-line Memory Module (SO-DIMM). SO-DIMM types5 You can install the following SO-DIMMs: 128 MB TechWorks PM133-128 256 MB TechWorks PM133-256 512 MB TechWorks PM133-512 128 MB Buffalo Technology 12462-0001 256 MB Buffalo Technology 12485-0001 512 MB Buffalo Technology 12475-0001 Note For more information, visit the Buffalo Techonology site at http://www.buffalotech.com . For more information, visit the Techworks web site at http://www.techworks.com . In general, the SO-DIMM must have the following specifications: Type: 144 pin and 64 bit output CAS latency: 2 Clock frequency: 100 MHz or more Capacity: 64, 128, 256 or 512 MB Height: 31.75 mm (1.25 in.) SDRAM can be used. Note There might be some SO-DIMMs that will not work with the printer. For more information, call the dealer you bought the printer from or Brother Customer Service.
Options 95 5 Installing extra memory5 Note Always turn off the printer power switch before installing or removing the SO-DIMM. aTurn off the printer power switch, and then unplug the printer. Disconnect the interface cable from the printer. bRemove the two SO-DIMM covers (both the plastic one (1) and the metal one (2)). cUnpack the SO-DIMM and hold it by its edges. CAUTION To prevent damage to the printer from static electricity, DO NOT touch the memory chips or the board surface. dHold the SO-DIMM by the edges and align the notches in the SO-DIMM with the protrusions in the slot. Insert the SO-DIMM diagonally (1), then tilt it toward the interface board until it clicks into place (2). 2 1 1 2
Options 96 5 ePut the two SO-DIMM covers back on (both the plastic one (1) and the metal one (2)). fReconnect the interface cable to your printer. Plug the printer back in, and then turn on the power switch. Note To make sure that you have installed the SO-DIMM properly, you can print the printer settings page that shows the current memory size. (See Menu tableon page 78.) 2 1
97 6 6 Replacing the consumable items6 When you need to replace the consumable items, the following messages will appear on the LCD. 1at 5% print coverage (A4 or Letter size). The actual number of printed pages will vary depending on the print jobs and paper you use . 2Standa rd to ne r cartridge . 3High-capacity toner cartridge. 4at 5% print coverage for CMYK each (A4 or Letter size). The actual number of printed pages will vary depending on the print jobs and paper you use. The following messages appear on the LCD in the Ready state. These messages provide advanced warnings to replace the consumable items before they run out. To avoid any inconvenience, you may want to buy spare consumable items before the printer stops printing. 1at 5% print coverage (A4 or Letter size). The actual number of printed pages will vary depending on the print jobs and paper you use . 2For example, if the Yellow and Magenta toner cartridges are almost empty, the indication will be ‘onno’ (n=blinking o). If the Yellow and Magenta toner cartridges are empty, the o indicator will have disappeared. 3Standa rd to ne r cartridge . 4High-capacity toner cartridge. Routine Maintenance6 LCD messagesConsumable item to replaceA pproximate lifeHow to replaceOrder No. Toner Life EndToner cartridge 2,500 pages 12 5,000 pages13 1,500 pages 12 4,000 pages 13 See page 99 TN-110C2, TN-110M2, TN-110Y 2, TN-110BK2, TN-115C 3, TN-115M3, TN-115Y 3, TN-115BK3 Waste Toner FullWaste toner box 20,000 pages 4See page 117 WT-100CL LCD messagesConsumable part to replaceA pproximate lifeHow to replaceOrder No. ReadyToner cartridge, Black2,500 pages 123 5,000 pages124 See page 99 TN-110BK3 TN-115BK4 ReadyToner cartridge, Y ellow1,500 pages123 4,000 pages 124 TN-110Y3 TN-115Y4 ReadyToner cartridge, MagentaTN-110M3 TN-115M4 ReadyToner cartridge, CyanTN-110C3 TN-115C4 YMC K YMC K YMC K YMC K
Rout i ne Ma i nt e na nce 98 6 The following are maintenance messages that appear alternately with the Ready message on the upper row of the LCD when the printer is in the Ready state. These messages advise you that you will need to replace each of the consumable items as soon as possible, since the consumable item’s end of life has been reached. The printer will continue printing when any of these messages appear on the LCD. 1When printing A4 or Letter size paper. The actual number of printed pages will vary depending on the print jobs and paper you use . 2a t 5% print cov era ge fo r CMYK ea ch (A4 o r Letter size). Note Discard used consumable items according to local regulations, keeping it separate from domestic waste. If you have questions, call your local waste disposal office. Be sure to reseal the consumable items tightly so that the material inside does not spill. We recommend placing used consumable items on a piece of paper to prevent accidentally spilling or scattering the material inside. If you use paper that is not a direct equivalent for the recommended paper, the life of consumable items and printer parts may be reduced. The projected life for each of toner cartridges and a waste toner box is based on an average of 5% coverage of the printable area using any color toner cartridge. Frequency of replacement will vary depending on the complexity of printed pages, percentage of coverage and type of media used. LCD messagesConsumable part to replaceA pproximate lifeHow to replaceOrder No. Drum End SoonDrum Unit 17,000 pages 1See page 106 DR-110CL Waste Toner SoonWaste toner box 20,000 pages 12See page 117 WT-100CL Change Belt UnitBelt unit 50,000 pages 1See page 112 BU-100CL Fuser Unit EndFuser unit 80,000 pages 1Call your dealer or Brother Customer Service for a replacement fuser unit. Laser Unit EndLaser unit 100,000 pages 1Call your dealer or Brother Customer Service for a replacement laser unit. Change PF Kit1,2Paper feeding kit 1, 2. (Paper pick-up roller Separator pad)100,000 pages 1Call your dealer or Brother Customer Service for a replacement paper feeding kit 1, 2. Change PF KitMPPaper feeding kit MP. (Paper pick-up roller Separator pad)50,000 pages 1Call your dealer or Brother Customer Service for a replacement of the paper feeding kit MP.
Rout i ne Ma i nt e na nce 99 6 Toner cartridges6 Note The amount of toner used varies according to what is printed on the page and the print density setting. Wait to unpack the toner cartridge until immediately before you put it into the printer. Toner nearly empty message6 Check printed pages, page counter, and display messages regularly. If the o indicator starts blinking, the printer has nearly run out of toner or the toner is not evenly distributed inside the cartridge. Ready o n n o The four o marks (also n, n=blinking o) indicate the Black (K), Yellow (Y), Magenta (M), Cyan (C) toner cartridges from left to right. Although you can print up to 300 additional pages (at 5% coverage) after the Toner Low message first appears, be sure to replace the toner cartridge with a new one before it becomes completely empty. When this occurs, the o indicator on the LCD will disappear. Toner Life End message6 When the following message appears on the LCD, you need to replace the toner cartridge: Toner Life End Replace Black(K) The second line of the LCD indicates which color you need to replace. Replacing a toner cartridge6 Note To ensure high quality printing, we recommend that you use only genuine Brother toner cartridges. When you want to buy toner cartridges, call your dealer or Brother Customer Service. We recommend that you clean the printer when you replace the toner cartridge. See Cleaningon page 123.
Rout i ne Ma i nt e na nce 100 6 CAUTION Wait to unpack the toner cartridge until immediately before you put it in the printer. If toner cartridges are left unpacked for a long time the toner life will be shortened. If an unpacked drum unit is put in direct sunlight or room light, the unit may be damaged. Put the toner cartridge in the drum unit immediately after you have removed the protective cover. To prevent any degradation to the print quality, DO NOT touch the shaded parts shown in the illustrations. CAUTION For USA and Canada Brother strongly recommends that you do not refill the toner cartridge provided with your printer. We also strongly recommend that you continue to use only genuine Brother brand replacement toner cartridges. Use or attempted use of potentially incompatible toner and/or cartridges in the Brother machine may cause damage to the machine and/or may result in unsatisfactory print quality. Our warranty coverage does not apply to any problem that is caused by the use of unauthorized third party toner and/or cartridges. To protect your investment and obtain premium performance from the Brother machine, we strongly recommend the use of genuine Brother supplies. CAUTION For UK and other countries Brother machines are designed to work with toner of a particular specification and will work to a level of optimum performance when used with genuine Brother branded toner cartridges. Brother cannot guarantee this optimum performance if toner or toner cartridges of other specifications are used. Brother does not therefore recommend the use of cartridges other than genuine Brother branded cartridges with this machine. If damage is caused to the drum unit or other part of this machine as a result of using other manufacturer’s products with this machine, any repairs required as a result may not be covered by the warranty.
Rout i ne Ma i nt e na nce 101 6 aTurn off the printer power switch. Press the front cover release button and then open the front cover. bHold the green handle of the drum unit. Lift the drum unit up and then pull it out until it stops. cHold the handle of the toner cartridge and pull it out of the drum unit. Repeat this for all the toner cartridges.