Brother He 1 Manual
Here you can view all the pages of manual Brother He 1 Manual. The Brother manuals for Sewing Machine are available online for free. You can easily download all the documents as PDF.
Page 81
Troubleshooting79 3 — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — The upper thread breaks. There are knots or tangles in the thread. Remove any knots or tangles. - The upper thread tension is too tight. Loosen the upper th read tension. page 63 The thread is tangled, for example, in the bobbin case. Remove the tangled thread. If the thread is tangled in the bobbin case, clean the race. page 74 The needle is bent or blunt. Replace the...
Page 82
80 APPENDIX — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — The thread tension is incorrect. The thread tension is incorrect. Adjust the tension of the upper thread and the bobbin thread. page 63, page 64 A bobbin designed specifically for this machine is not used. Incorrect bobbins will not work properly. Only use a bobbin designed specifically for this machine. page 29 The upper thread is too tight. The bobbin thread is incorrectly installed....
Page 83
Troubleshooting81 3 — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — Embroidery unit does not move. No pattern selected. Select a pattern. page 50 The embroidery unit is not set up correctly. Set the embroidery unit up correctly. page 19 Embroidery not neatly done. The fabric is not fully stretched on the embroidery frame. The fabric is loose. Stretch the fabric properly on the embroidery frame. page 44 No stabilizer material is attached....
Page 84
82 APPENDIX — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — Error messages When erroneous operations are performed messages and advice on operation will be displayed on the LCD. Follow what is displayed. If you press or do the operation correctly while the error message is displayed, the message disappears. NoError MessageProbable Cause 1 There is a possibility that the data for the selected pattern is corrupted. 2 The start/stop butt on was pressed at a...
Page 85
Troubleshooting83 3 — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — 9 You pressed the back key or the embroidery key when a pattern was selected. 10 You tried to select an embroidery pattern or change the layout when the needle was down. The machine is turned on while the needle is lowered and the embroidery unit is attached. 11 You tried to initialize the embroidery unit with the embroidery foot lowered. 12 When 13 or more patterns are...
Page 86
84 APPENDIX — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — 18When the embroidery unit is attached. 19 You tried to set a number of characters that will not fit within the frame. 20 The upper thread has become tangled around the bobbin case, and the needle is bent and hitting the needle plate, etc., so the machine stops (refer to page 78). 21 An Embroidery Memory Card that may not compatible with your machine has been inserted. Certain licensed...
Page 87
Troubleshooting85 3 — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — Adjusting the LCD If nothing appears in the LCD when the machine is turned on, the brightness of the LCD is either too light or too dark. In such a cas e, perform the following operation. aTurn off the machine. bTurn on the machine while pressing any of the operation panel keys except (Help key). c Press or . dTurn off the machine, then turn it on again. Operation...
Page 88
86 APPENDIX — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — Upgrading Your Machines Software You can use a computer to download software upgrades for your machine. Visit our website at http://solutions.brother.com for notification of available updates. Note zBe sure to download the upgrade file for this model fr om our web site. An upgrade file for any different model cannot be downloaded. z Refer to the Changing the machine settings (page 23) for how to...
Page 89
Index87 3 — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — Index A accessories ................................................................. 8, 9 adjusting layout ............................................................ 61 adjusting thread tension ......................................... 63, 64 air vent ......................................................................... 11 appliqué pattern selection...
Page 90
88 APPENDIX — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — pattern retrieving .................................................... 70, 71 plug .............................................................................. 18 power supply cord ........................................................ 18 power supply jack ......................................................... 18 power switch ......................................................... 11,...