Brother He 1 Manual

Using the Memory Function69
2
 — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — 
Using the Memory Function
Embroidery data precautions
Observe the following precautions when using embroidery data other than that created and saved in this 
machine.
CAUTION
■Types of Embroidery Data that can be Used
• Only .pes and .dst embroidery data files can be used  with this machine. Using data other than that saved 
using our data design systems or machines m ay...

70
EMBROIDERY — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — 
Saving patterns
The embroidery patterns and the alphanumeric 
characters you have customized can be saved in the 
machines memory. 
Since the saved patterns will not be erased when the 
power is turned off, you ca n always retrieve them for 
embroidery. This is convenient for saving names and 
the like. You can save up to 12 patterns or 512KB of 
data. 
■ Saving a pattern
aAfter selecting the pattern...

Using the Memory Function71
2
 — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — 
Retrieving embroidery 
patterns from the computer
aPlug the USB cable connectors into the 
corresponding USB port connectors on the 
computer and on the machine.
aUSB port connector for computer
b USB cable connector
Memo
zThe USB cable can be plugged into the USB 
port connectors on the computer and 
machine whether or not they are turned on.
z Embroidery patterns can...

72
EMBROIDERY — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — 
eSelect the pattern you wish to retrieve.
Switch screens using  (Previous page key) 
and  (Next page key). 
aTotal amount of memory used
b Total amount of memory space
c Number of the currently displayed page from the 
total number of pages
XThe selected pattern  is shown in reverse 
highlighting.
fPress .
X The saved pattern is retrieved. 
X The embroidery screen appears, and you 
can embroider the...

3 APPENDIX
The various maintenance and troubleshooting procedures are described in this chapter.
Care and Maintenance ............................................................................................ 74
Attaching the Embroidery Foot................................................................................ 76
Troubleshooting ...................................................................................................... 78
Upgrading Your Machines Software...

74
APPENDIX — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — 
Care and Maintenance
Simple machine maintenance operations are described below.
Cleaning the machine surface
If the surface of the machine is dirty, lightly soak a 
cloth in neutral detergen t, squeeze it out firmly, and 
then wipe the surface of  the machine. After cleaning 
it once with a damp cloth, wipe it again with a dry 
cloth.
CAUTION
Cleaning the race
Embroidery performance will suffer if...

Care and Maintenance75
3
 — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — 
gUse the cleaning brush or  a vacuum cleaner to 
remove any lint and dust from the race and 
bobbin thread sensor and their surrounding 
area.
a Cleaning brush
b Race
c Bobbin thread sensor
Note
zDo not apply oil to the bobbin case.
z If lint or dust collects on the bobbin thread 
sensor, the sensor may not operate correctly.
hInsert the bobbin case so that the  U mark on...

76
APPENDIX — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — 
Attaching the Embroidery Foot 
This section describes how to attach the embroidery foot Q.
Attaching the embroidery foot 
If you need to replace the embroidery foot, attach the 
embroidery foot Q as follows.
a Embroidery foot bar
b Caught by the presser foot holder screw
CAUTION
aPress   (Needle position button) once or 
twice to raise the needle.
aNeedle position button
Note
zThe needle is correctly...

Attaching the Embroidery Foot77
3
 — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — 
eWhile pressing in the lever  with your finger, fit 
the embroidery foot bar over the needle clamp 
screw to attach the embroidery foot to the 
presser foot bar. 
a Presser foot bar
b Needle clamp screw
c Embroidery foot bar
f
Secure the embroidery foot with the presser 
foot holder screw. 
Set the embroidery foot perpendicular.
a Presser foot holder screw
g
Firmly...

78
APPENDIX — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — 
Troubleshooting
If the machine stops operating correctly, check the following possible problems before requesting service. 
You can solve most problems by yourself. If you need additional help, the Brother Solutions Center offers 
the latest FAQs and troubleshooting tips. Visit us at [http://solutions.brother.com]. 
If the problem persists, contact your dealer  or the nearest authorized service...