Brother DCP J715W User Manual

							Menu and features53
C
Menu tableC
The menu table will help you understand the menu selections and options that are found in the 
machines programs. The factory settings are shown in Bold with an asterisk.
Menu ( )C
Level1Level2Level3OptionsDescriptions Page
Ink ManagementTest Print—Print Quality
AlignmentLets you check the print 
quality or alignment.
37
Cleaning —Black
Color
AllLets you clean the print 
head.
37
Ink Volume — — Lets you check the 
available ink volume.See
1.
General Setup Paper Type —Plain Paper*
Inkjet Paper
Brother BP71
Brother BP61
Other Glossy
Transparency Sets the type of paper in 
the paper tray.
16
Paper Size —A4*
A5
10x15cm
Letter
LegalSets the size of the 
paper in the paper tray.
16
LCD Settings Backlight Light *
Med
Dark You can adjust the 
brightness of the LCD 
backlight.
7
Dim Timer Off
10Secs
20Secs
30Secs*You can set how long 
the LCD backlight stays 
on for after you go back 
to the Ready screen.
See
1.
1See 
Advanced User’s Guide .
The factory settings are shown in Bold with an asterisk.
 
						

							54
Network menu (DCP-J515W)C
General Setup
(Continued)Sleep Mode
—1Min
2Mins
3Mins
5Mins*
10Mins
30Mins
60MinsYou can choose how 
long the machine must 
be idle before it goes into 
sleep mode.
See1.
Level1 Level2 Level3 Options Descriptions
Network TCP/IP BOOT Method Auto *
Static
RARP
BOOTP
DHCP Chooses the BOOT method 
that best suits your needs.
IP Address [000-255].
[000-255].
[000-255].
[000-255] Enter the IP address.
Subnet Mask [000-255].
[000-255].
[000-255].
[000-255] Enter the subnet mask.
Gateway [000-255].
[000-255].
[000-255].
[000-255] Enter the Gateway address.
Node Name BRWXXXXXXXXXXXX You can see the current 
Node name.
WINS Config Auto *
Static You can choose the WINS 
configuration mode.
See  Network Users Guide .
The factory settings are shown in Bold with an asterisk.
Level1 Level2 Level3 Options Descriptions Page
1See 
Advanced User’s Guide .
The factory settings are shown in Bold with an asterisk.
 
						

							Menu and features55
C
Network
(Continued) TCP/IP
(Continued)WINS Server
(Primary)
000.000.000.000
(Secondary)
000.000.000.000 Specifies the IP address of 
the primary or secondary 
server.
DNS Server (Primary)
000.000.000.000
(Secondary)
000.000.000.000 Specifies the IP address of 
the primary or secondary 
server.
APIPA On*
Off Automatically allocates the 
IP address from the link-local 
address range.
Setup Wizard —— You can manually configure 
your print server for a 
wireless network.
WPS/AOSS —— You can easily configure 
your wireless network 
settings using the one-button 
push method.
WPS w/PIN Code —— You can easily configure 
your wireless network 
settings using WPS with a 
PIN code.
WLAN Status Status —You can see the current 
wireless network status.
Signal — You can see the current 
wireless network signal 
strength.
SSID — You can see the current 
SSID.
Comm. Mode — You can see the current 
Communication Mode.
MAC Address —— You can see your machine’s 
Mac address from the control 
panel.
WLAN Enable —On
Off* Lets you use the wireless 
network connection.
Network Reset —— Restores all network settings 
to factory default.
Level1
Level2Level3Options Descriptions
See  Network Users Guide .
The factory settings are shown in Bold with an asterisk.
 
						

							56
Network menu (DCP-J715W)C
Level1Level2Level3Level4Options Descriptions
Network Wired LAN TCP/IP BOOT Method Auto *
Static
RARP
BOOTP
DHCP Chooses the 
BOOT method 
that best suits 
your needs.
IP Address [000-255].
[000-255].
[000-255].
[000-255] Enter the IP 
address.
Subnet Mask [000-255].
[000-255].
[000-255].
[000-255] Enter the Subnet 
mask.
Gateway [000-255].
[000-255].
[000-255].
[000-255] Enter the 
Gateway 
address.
Node Name BRNXXXXXXXXXXXX Enter the Node 
name.
WINS Config Auto *
Static Chooses the 
WINS 
configuration 
mode.
WINS Server (Primary) 
000.000.000.000
( Secondary ) 
000.000.000.000 Specifies the IP 
address of the 
primary or 
secondary 
server.
DNS Server (Primary) 
000.000.000.000
( Secondary ) 
000.000.000.000 Specifies the IP 
address of the 
primary or 
secondary 
server.
APIPA On*
Off Automatically 
allocates the IP 
address from the 
link-local address 
range.
See  Network Users Guide .
The factory settings are shown in Bold with an asterisk.
 
						

							Menu and features57
C
Network
(Continued)Wired LAN
(Continued)Ethernet
—Auto*
100B-FD
100B-HD
10B-FD
10B-HD Chooses the 
Ethernet link 
mode.
MAC Address —— You can see your 
machine’s Mac 
address from the 
control panel.
WLAN TCP/IP BOOT Method Auto *
Static
RARP
BOOTP
DHCP Chooses the 
BOOT method 
that best suits 
your needs.
IP Address [000-255].
[000-255].
[000-255].
[000-255] Enter the IP 
address.
Subnet Mask [000-255].
[000-255].
[000-255].
[000-255] Enter the Subnet 
mask.
Gateway [000-255].
[000-255].
[000-255].
[000-255] Enter the 
Gateway 
address.
Node Name BRWXXXXXXXXXXXX Enter the Node 
name.
WINS Config Auto *
Static Chooses the 
WINS 
configuration 
mode.
WINS Server (Primary ) 
000.000.000.000
( Secondary ) 
000.000.000.000 Specifies the IP 
address of the 
primary or 
secondary 
server.
DNS Server (Primary ) 
000.000.000.000
( Secondary ) 
000.000.000.000 Specifies the IP 
address of the 
primary or 
secondary 
server.
Level1
Level2Level3Level4 Options Descriptions
See  Network Users Guide .
The factory settings are shown in Bold with an asterisk.
 
						

							58
Network
(Continued)WLAN
(Continued)TCP/IP
(Continued)APIPA On
*
Off Automatically 
allocates the IP 
address from the 
link-local address 
range.
Setup Wizard —— You can manually 
configure your 
print server for a 
wireless network.
WPS/AOSS —— You can easily 
configure your 
wireless network 
settings using the 
one-button push 
method.
WPS w/PIN Code—— You can easily 
configure your 
wireless network 
settings using 
WPS with a PIN 
code.
WLAN Status Status —You can see the 
current wireless 
network status.
Signal — You can see the 
current wireless 
network signal 
strength.
SSID — You can see the 
current SSID.
Comm. Mode — You can see the 
current 
Communication 
Mode.
MAC Address —— You can see your 
machine’s Mac 
address from the 
control panel.
Network I/F —Wired LAN*
WLAN —
You can choose 
the network 
connection type.
Network Reset—Yes
No— Restores all wired 
and wireless 
network settings 
to the factory 
default.
Level1 Level2 Level3 Level4 Options Descriptions
See Network Users Guide .
The factory settings are shown in Bold with an asterisk.
 
						

							Menu and features59
C
Menu ( ) (continued)C
Level1Level2Level3Options Descriptions Page
Print Reports Help List —— You can print these lists 
and reports. See
1.
User Settings ——
Network Config——
WLAN Report ——
Machine Info. Serial No. —— Lets you check the serial 
number of your machine. 51
Initial Setup Date&Time —— Puts the date and time in 
your machine. See
2.
Reset Network — Resets the print server 
back to its factory default 
settings, such as the IP 
address information. 51
All Settings — Resets all the machine’s 
settings back to the 
settings that were set at 
the factory. 51
Local Language—
(Choose the 
language you 
want to use) Allows you to change the 
LCD language for your 
country.
See1.
1See 
Advanced User’s Guide .
2See Quick Setup Guide .
The factory settings are shown in Bold with an asterisk.
 
						

							60
Copy (Default display)C
Level1Level2Level3 Options Descriptions Page
Quality —— Fast
Normal*
BestChoose the Copy 
resolution for your type of 
document.
See
1.
Enlarge/Reduce100%
* ———
Enlarge — 142% A5iA4
186% 10x15cmiLTR
198% 10x15cmiA4
You can choose the 
enlargement ratio for the 
next copy.
Reduce —
47% A4i10x15cm
69% A4iA5
(DCP-J515W)
83%
93% A4i LTR
97% LTRi A4
(DCP-J715W)
83% LGLi A4
93% A4i LTR
97% LTRi A4You can choose the 
reduction ratio for the 
next copy.
Fit to Page — —Your machine will adjust 
the size automatically to 
the paper size you set.
Custom(25-400%)— —You can choose the 
enlargement or reduction 
ratio for the next copy.
Paper Type —— Plain Paper*
Inkjet Paper
Brother BP71
Brother BP61
Other Glossy
Transparency Choose the paper type 
that matches the paper in 
the tray.
24
Paper Size —— A4*
A5
10x15cm
Letter
LegalChoose the paper size 
that matches the paper in 
the tray.
24
1See 
Advanced User’s Guide .
The factory settings are shown in Bold with an asterisk.
 
						

							Menu and features61
C
Density—— Adjusts the density of 
copies. See1.
Ink Save Mode —— On
Off* You can save some ink.
Stack/Sort
(DCP-J715W 
only) ——
Stack*
SortYou can choose to stack 
or sort multiple copies.
Page Layout —— Off(1 in 1)*
2 in 1 (P)
2 in 1 (L)
4 in 1 (P)
4 in 1 (L)
Poster(3 x 3) You can make N in 1 or 
Poster copies.
Book Copy On— — Corrects dark borders 
and skew when copying 
from the scanner glass.
On(Preview)
(Skew 
Adjustment) —
(Shadow Revise) —
Off * ——
Watermark Copy Watermark Copy— On
Off*
(If you choose On, 
see the 
watermark copy 
settings in the 
following table.) You can place a logo or 
text into your document 
as a Watermark.
Current Setting——
Exit ——
Set New Default—— —You can save your copy 
settings.
Factory Reset —— —You can restore all 
settings to the factory 
settings.
Level1
Level2Level3 OptionsDescriptions Page
1See Advanced User’s Guide .
The factory settings are shown in Bold with an asterisk.
 
						

							62
Watermark Copy SettingsC
Option1Option2Option3 Option4Descriptions Page
Template —TextCONFIDENTIAL*
DRAFT
COPY Places a text into your 
document as a 
Watermark using a 
template.
See
1.
Position A
B
C
D
E*
F
G
H
I
Pattern
Size Small
Medium*
Large
Angle -90
-45° *
0 
45 
90 
Transparency -2
-1
0*
+1
+2
Colour Red
Orange
Yellow
Blue
Green
Purple
Black*
Apply —
1See Advanced User’s Guide .
The factory settings are shown in Bold with an asterisk.