Brother DCP 9045CDN User Manual

Printing data from a USB flash memory drive
43
7
Printing data directly 
from the USB flash 
memory drive
7
aConnect your USB flash memory drive 
to the USB direct interface (1) on the 
front of the machine.
 
bWhen the machine has recognised the 
USB flash memory drive, the Direct 
LED turns blue.
Press the Direct key.
 
Direct Print
a1.FILE0_1.PDF
2.FILE0_2.PDF
b3.FILE0_3.PDF
Selectabor OK
cPress a or b to choose the folder name 
or file name you want to print.
Press OK.
If you have chosen the folder...

Chapter 7
44
CAUTION 
To prevent damage to your machine, DO 
NOT connect any device other than a digital 
camera or USB flash memory drive to the 
USB direct interface.
  
DO NOT remove the USB flash memory 
drive from the USB direct interface until the 
machine has finished printing.
 
Note
• If you want to change the paper tray to 
feed paper from, press Menu, 1, 6, 2 to 
change the paper tray setting.
• You can change the default settings for 
direct print by using the control panel 
when the machine...

Section IV
SoftwareIV
Software and network features46
 

46
8
The User’s Guide on the CD-ROM includes 
the Software User’s Guide and Network 
User’s Guide for features available when 
connected to a computer (for example, 
printing and scanning). These guides have 
easy to use links that, when clicked, will take 
you directly to a particular section.
You can find information on these features:
„Printing
„Scanning
„ControlCenter3 (for Windows
®)
„ControlCenter2 (for Macintosh
®)
„Network Printing
„Network Scanning
Note
See Accessing the User’s Guides 
on page...

Section V
AppendixesV
Safety and legal48
Options57
Troubleshooting and routine maintenance62
Menu and features147
Specifications160
Glossary170
 

48
A
Choosing a locationA
Place your machine on a flat, stable surface that is free of vibration. Put the machine near a 
standard, grounded electrical socket. Choose a location where the temperature remains between 
10° C and 32.5° C and the humidity is between 20% to 80% (without condensation).
„Make sure cables leading to the machine DO NOT constitute a trip hazard.
„Avoid placing your machine on the carpet.
„DO NOT place the machine near heaters, air conditioners, water, chemicals or refrigerators....

Safety and legal
49
A
Important informationA
Safety precautionsA
Please read these instructions before attempting any maintenance, and keep them for later 
reference.
„DO NOT use this product near water, or in a damp environment.
„Avoid using this product during an electrical storm. There may be a remote risk of electric 
shock from lightning.
„We DO NOT advise using an extension lead.
„If any cables become damaged, disconnect your machine, and contact your Brother dealer.
„DO NOT place any objects on...

50
WARNING 
Before cleaning the inside of the machine, unplug 
the power cord from the electrical socket.
 
DO NOT handle the plug with wet hands. Doing 
this might cause an electrical shock.
 
Always make sure the plug is fully inserted.
After you have just used the machine, some 
internal parts of the machine will be extremely hot. 
When you open the front or back cover of the 
machine, DO NOT touch the shaded parts shown 
in the illustration.
 
The fuser unit is marked with a caution label. DO 
NOT...

Safety and legal
51
A
 
To prevent injuries, DO NOT put your fingers in the 
area shown in the illustration.
 
DO NOT use a vacuum cleaner to clean up scattered toner. Doing this might cause the toner 
dust to ignite inside the vacuum cleaner, potentially starting a fire. Please carefully clean the 
toner dust with a dry, lint-free cloth and dispose of it according to local regulations.
If moving your machine, use the handholds 
provided. First making sure to disconnect any 
cables. To prevent injuries...

52
IEC60825-1+A2:2001 SpecificationA
This machine is a Class 1 laser product as defined in IEC60825-1+A2:2001 specifications. The 
label shown below is attached in countries where required.
Laser DiodeA
Wave length: 780 - 800 nm
Output: 30 mW max.
Laser Class: Class 3B
WARNING 
Use of controls, adjustments or performance of procedures other than those specified in this 
manual may result in hazardous radiation exposure.
 
Disconnect deviceA
This product must be installed near an electrical socket that is...