Brother DCP 9040CN User Manual

Safety and legal
39
A
CAUTION 
Lightning and power surges can damage this product! We recommend that you use a quality 
surge protection device on the AC power line or unplug the cords during a lightning storm.
 
WARNING 
IMPORTANT SAFETY INSTRUCTIONS
When using your equipment, basic safety precautions should always be followed to reduce the 
risk of fire, electric shock and injury to people, including the following:
1 DO NOT use this product near water, for example, near a bath tub, wash bowl, kitchen...

40
Important informationA
Federal Communications Commission (FCC) Declaration of 
Conformity (USA only)A
declares, that the products
Product Name: DCP-9040CN and DCP-9042CDN
comply with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This 
device may not cause harmful interference, and (2) this device must accept any interference 
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for...

Safety and legal
41
A
Industry Canada Compliance Statement (Canada only) A
This Class B digital apparatus complies with Canadian ICES–003. 
Cet appareil numérique de la classe B est conforme à la norme NMB–003 du Canada.
Disconnect deviceA
This product must be installed near an electrical jack that is easily accessible. In case of 
emergencies, you must disconnect the power cord from the electrical jack to shut off power 
completely.
LAN connection A
CAUTION 
DO NOT connect this product to a LAN...

42
FDA regulationsA
U.S. Food and Drug Administration (FDA) has implemented regulations for laser products 
manufactured on and after August 2, 1976. Compliance is mandatory for products marketed in the 
United States. The following label on the back of the machine indicates compliance with the FDA 
regulations and must be attached to laser products marketed in the United States.
WARNING 
Use of controls, adjustments or performance of procedures other than those specified in this 
manual may result in...

Safety and legal
43
A
8 This product is equipped with a 3-wire grounded plug. This plug will only fit into a grounded 
power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, call 
your electrician to replace your obsolete outlet. DO NOT defeat the purpose of the grounded 
plug.
9 Use only the power cord supplied with this machine.
10 DO NOT allow anything to rest on the power cord. DO NOT place this product where people 
can walk on the cord.
11 If an extension cord...

44
Legal limitations for copyingA
Color reproductions of certain documents are illegal and many result in either criminal or civil 
liability. This memorandum is intended to be a guide rather than a complete listing of every 
possible prohibition. In case of doubt, we suggest that you check with counsel as to any particular 
questionable documents.
The following documents issued by the United States/Canadian Government or any of its 
Agencies may not be copied:
„Money
„Bonds or other certificates of...

Safety and legal
45
A
TrademarksA
The Brother logo is a registered trademark of Brother Industries, Ltd.
Brother is a registered trademark of Brother Industries, Ltd.
Multi-Function Link is a registered trademark of Brother International Corporation.
Microsoft, Windows and Windows Server are registered trademarks of Microsoft Corporation in 
the U.S. and other countries.
Windows Vista is either a registered trademark or trademark of Microsoft Corporation in the United 
States and/or other countries....

46
B
OptionB
This machine has the following optional accessory. You can increase the capabilities of the 
machine with this item.
OptionB
DIMM memory
 
 

Option
47
B
Memory boardB
This machine has 64 MB of standard memory 
and one slot for optional memory expansion. 
You can expand the memory up to 576 MB by 
installing dual in-line memory modules 
(SO-DIMMs). When you add the optional 
memory, it increases the performance for 
both copy and print operations.
In general, the machine uses industry- 
standard SO-DIMM with the following 
specifications:
Type: 144 pin and 64 bit output
CAS latency: 2
Clock frequency: 100 MHz or more
Capacity: 64 MB, 128 MB,...

48
eHold the DIMM by the edges and align 
the notches in the DIMM with the 
protrusions in the slot. Insert the DIMM 
diagonally (1), then tilt it toward the 
interface board until it clicks into 
place (2).
 
fPut the DIMM covers (2 and 1) back on. 
gPlug the machine’s power cord back into 
the AC power outlet first, and then 
connect the interface cable.
hTurn on the machine’s power switch.
Note
To make sure that you have installed the 
SO-DIMM properly, you can print the User 
Settings List that shows...