Brother DCP 9010CN User Manual

Troubleshooting and routine maintenance103
C
jClose the top cover. 
kPut the waste toner box and one drum 
unit and toner cartridges assembly in 
the Styrofoam piece.
 
lUsing two people, place the machine 
into the plastic bag.
mPut the machine and the Styrofoam 
pieces into the carton. Match the front 
side of the machine to the “FRONT” 
mark on the Styrofoam pieces. Put the 
Styrofoam pieces for the drum unit and 
toner cartridge assemblies on the top of 
the machine.
 
nPut the power cord, and the...

104
oPut the four carton trays on the top. 
pClose the carton and tape it shut.
 

105
D
D
On-screen 
programming
D
Your machine has been designed to be easy 
to use. The LCD provides on-screen 
programming using the menu keys.
We have created step by step on-screen 
instructions to help you program your 
machine. Simply follow the steps as they 
guide you through the menu selections and 
programming options.
Menu tableD
You can program your machine by using the 
Menu table on page 107. These pages list 
the menu selections and options.
Press  Menu followed by the menu numbers 
to...

106
How to access the menu 
modeD
aPress Menu.
bChoose an option.
„ Press  1 for General Setup menu.
„ Press  2 for Copy menu.
„ Press  3 for Printer menu.
„ Press  4 for Network menu.
„ Press  5 for Machine Info. menu.
You can also scroll through each menu 
level by pressing  a or  b for the direction 
you want.
cPress  OK when the option you want 
appears on the LCD.
The LCD will then show the next menu 
level.
dPress  a or  b to scroll to your next menu 
selection.
ePress  OK.
When you have finished...

Menu and features107
D
Menu tableD
The factory settings are shown in Bold with an asterisk.Choose & OK Choose & OK to accept to exit
                      
Main Menu Submenu Menu Selections Options Descriptions Page
1.
General Setup1.Paper 1.Paper Type Thin
Plain*
Thick
Thicker
Recycled Paper Sets the type of paper in 
the paper tray.
23
2.Paper Size A4 *
Letter
Legal
Executive
A5
A5 L
A6
B5
B6
Folio Sets the size of the paper 
in the paper tray.
23
2.Beeper — Off
Low
Med*
High Adjusts the volume level...

108
1.General Setup
(Continued)5.
Document Scan1.Glass ScanSizeA4
*
Letter Adjusts the scan area of 
the scanner glass to the 
size of the document.See 
Software  User’s 
Guide  on 
the 
CD-ROM.
6.Reset 1.Network 1.Reset
2.ExitRestores all network 
settings to factory default.
99
2.
All Settings1.Reset
2.Exit Restores all the machine 
settings to factory default.
99
0.
Local Language— (Choose your  language.) Allows you to change the 
LCD language for your 
country. See 
Quick 
Setup 
Guide.
2.Copy...

Menu and features109
D
2.Copy
(Continued) 4.Color Adjust1.Red
b - nnnno + a
b  - nnnon + a
b  - nnonn + a*
b  - nonnn + a
b  - onnnn + a Adjusts the red colour for 
copies. 
30
2.Green b - nnnno + a
b  - nnnon + a
b  - nnonn + a*
b  - nonnn + a
b  - onnnn + a Adjusts the green colour 
for copies.
3.Blue b - nnnno + a
b  - nnnon + a
b  - nnonn + a*
b  - nonnn + a
b  - onnnn + a Adjusts the blue colour for 
copies.
3.Printer 1.Emulation —Auto*
HP LaserJet
BR-Script 3 Chooses the emulation 
mode.
See...

110
3.Printer
(Continued)7.Manual Regist.1.Print Chart
— Print the chart to manually 
check the registration of 
the colours. 76
2.Set Regist. 1 Magenta
2 Cyan
3 Yellow
4 Magenta
5 Cyan
6 Yellow
7 Magenta
8 Cyan
9 Yellow Sets the correction value 
on the chart you printed 
from 
Print Chart .
8.
Drum Cleaning— — Carry out cleaning the  drum unit to improve the 
print quality problem.70
4.Network 1.TCP/IP 1.Boot Method Auto *
Static
RARP
BOOTP
DHCP Chooses the BOOT 
method that best suits your 
needs....

Menu and features111
D
4.Network
(Continued) 1.TCP/IP
(Continued)8.DNS Server
Primary
[000-255]. [000-255]. 
[000-255]. [000-255]
Secondary
[000-255]. [000-255]. 
[000-255]. [000-255] Specifies the IP address of 
the primary or secondary 
DNS server.See 
Network  User’s 
Guide  
on the 
CD-ROM.
9.APIPA On *
Off Automatically allocates the 
IP address from the link-
local address range.
0.IPv6 On
Off* Enable or Disable the IPv6 
protocol. If you want to use 
the IPv6 protocol, visit...

112
Entering textD
When setting certain menu selections, you will need to type text characters. The numeric keys 
have letters printed on them.
Press the appropriate numeric key the number of times shown in this reference table to access 
the character you want.
Inserting spaces
To enter a space in a number, press c once between numbers. To enter a space in a name, 
press c twice between characters.
Making corrections
If you entered a letter incorrectly and want to change it, press  d to move the cursor...