Brother DCP 770CW User Manual

							
Printing photos from a memory card or USB Flash memory drive33
5
Entering PhotoCapture mode5
After you insert the memory card or USB 
Flash memory drive, press the (PhotoCapture ) key to illuminate it in 
green and display the PhotoCapture options 
on the LCD.
The LCD shows:
 
Press  a or  b to scroll through the 
PhotoCapture key options.
„ View Photo(s)  (See page 33.)
„ Print Index  (See page 34.)
„ Print Photos  (See page 34.)
„ Photo Effects  (See page 35.)
„ Search by Date  (See page 38.)
„ Print All Photos  (See page 39.)
„ Slide show  (See page 39.)
„ Trimming  (See page 40.)
Note
If your digital camera supports DPOF 
printing, see  DPOF printing on page 40.
 
When the option you want is highlighted, 
press OK.
Print Images5
View Photo(s)5
You can preview your photos on the LCD 
before you print them. If your photos are large 
files there may be a delay before each photo 
is displayed on the LCD.
aMake sure you have put a memory card 
or USB Flash memory drive in the 
correct slot.
Press ( PhotoCapture ). 
bPress a or  b to choose 
View Photo(s) .
Press  OK.
cPress  d or  c to choose your photo.
dPress  + or  - repeatedly to enter the 
number of copies you want.
eRepeat step c and step d until you 
have chosen all the photos.
fAfter you have chosen all the photos, do 
one of the following: 
„ Press  OK and change the print 
settings. (See page 41.) 
„ If you do not want to change any 
settings, press  Colour Start to print.
View Photo(s)
PHOTO Select & Press
OK
Print PhotosPrin t P hoto sPrint IndexP rin t In dex
Photo EffectsP hoto  E ff e cts
View photos on the LCDV ie w  p h oto s o n th e L C Dand select the imagesan d s e le ct t h e  im age syou want toyo u  w ant toprint.p rin t.Search by DateS ea rc h  b y D atePrint All  PhotosP rin t A ll  P hoto s
 
						

							
Chapter 5
34
Print Index (Thumbnails)5
The PhotoCapture Center™ assigns 
numbers for images (such as No.1, No.2, 
No.3, and so on).
 
The PhotoCapture Center™ uses these 
numbers to identify each pictures. You can 
print a thumbnail page (Index page with 5 
images per line). This will show all the 
pictures on the  memory card or USB Flash 
memory drive.
 
Note
Only file names that are 8 characters or 
less will be printed correctly on the index 
sheet.
 
aMake sure you have put the memory 
card or USB Flash memory drive in the 
correct slot.
Press ( PhotoCapture ). 
bPress a or  b to choose  Print Index .
Press  OK.
cPress  a or  b to choose the paper 
settings,  Paper Type  or Paper Size .
Do one of the following.
„ If you chose Paper Type, press 
d or  c to choose the type of paper 
you are using,  Plain Paper , 
Inkjet Paper , Brother Photo  
or  Other Photo . 
Press  OK.
„ If you chose Paper Size, press  d or  c 
to choose the paper size you are 
using,  Letter  or A4.
Press  OK.
„ If you do not want to change the 
paper settings, go to  d
dPress Colour Start  to print.
Print Photos5
Before you can print an individual image, you 
have to know the image number.
aMake sure you have put a memory card 
or USB Flash memory drive in the 
correct slot.
Press ( PhotoCapture ). 
bPrint the Index. (See  Print Index 
(Thumbnails) on page 34.)
cPress a or  b to choose  Print Photos .
Press  OK.
dPress  a repeatedly to choose the image 
number that you want to print from the 
Index page (Thumbnails).
If you want to choose a two digit 
number, press  c to move the cursor to 
the next digit.
(For example, enter 1,  c, 6 to print image 
No.16.)
Press  OK.
Note
Press  b to decrease the image number.
 
 
						

							
Printing photos from a memory card or USB Flash memory drive35
5
eRepeat stepd until you have entered 
the image numbers that you want to 
print. (For example, enter 1,  OK, 3,  OK, 
6,  OK  to print images No.1, No.3 and 
No.6.)
Note
You can enter up to 12 characters 
(including commas) for the image 
numbers you want to print.
 
fAfter you have chosen the image 
numbers, press  OK again.
gPress  + or  - repeatedly to enter the 
number of copies you want.
hDo one of the following:
„ Change the print settings. 
(See page 41.)
„ If you do not want to change any 
settings, press  Colour Start to print.
Photo Effects5
You can edit and add effects to your photos 
and view them on the LCD before printing.
Note
• After adding each effect, you can enlarge 
the view of the image by pressing 
Ink Management . To go back to the 
original size, press  Ink Management 
again.
• The Photo Effects feature is supported by 
technology from Reallusion, Inc.
 
Auto Correct5
Auto Correct is available for most photos. The 
machine decides the suitable effect for your 
photo.
aMake sure you have put a memory card 
or USB Flash memory drive in the 
correct slot.
Press ( PhotoCapture ). 
bPress a or  b to choose 
Photo Effects .
Press  OK.
cPress  d or  c to choose your photo.
Press  OK.
dPress  a or  b to choose  Auto Correct .
Press  OK.
ePress  OK if you do not want to change 
any settings.
fPress  + or  - repeatedly to enter the 
number of copies you want.
gDo one of the following.
„ Press  OK and change the print 
settings. (See page 41.)
„ If you do not want to change any 
settings, press  Colour Start to print.
Note
If Remove Red-Eye  appears on the LCD, 
press  a to remove red-eye from your 
photo.
 
 
						

							
Chapter 5
36
Enhance Skin-Tone5
Enhance Skin-Tone is best used for adjusting 
portrait photographs. It detects human skin 
colour in your photos and adjusts the image.
aMake sure you have put a memory card 
or USB Flash memory drive in the 
correct slot.
Press ( PhotoCapture ). 
bPress a or  b to choose 
Photo Effects .
Press  OK.
cPress  d or  c to choose your photo.
Press  OK.
dPress  a or  b to choose 
Enhance Skin-Tone .
Press  OK.
eDo one of the following.
„ Press  OK if you do not want to 
change any settings.
„ Press  a or  b to adjust the effect level 
manually. Press  OK when you have 
finished.
fPress  + or  - repeatedly to enter the 
number of copies you want.
gDo one of the following.
„ Press  OK and change the print 
settings. (See page 41.)
„ If you do not want to change any 
settings, press  Colour Start to print.
Enhance Scenery5
Enhance Scenery is best used for adjusting  
landscape photographs. It highlights green 
and blue areas in your photo, so that the 
landscape looks more sharp and vivid.
aMake sure you have put the memory 
card or USB Flash memory drive in the 
correct slot.
Press ( PhotoCapture ). 
bPress a or  b to choose 
Photo Effects .
Press  OK.
cPress  d or  c to choose your photo.
Press  OK.
dPress  a or  b to choose  
Enhance Scenery .
Press  OK.
eDo one of the following.
„ Press  OK if you do not want to 
change any settings.
„ Press  a or  b to adjust the effect level 
manually. Press  OK when you have 
finished.
fPress  + or  - repeatedly to enter the 
number of copies you want.
gDo one of the followings.
„ Press  OK and change the print 
settings. (See page 41.)
„ If you do not want to change any 
settings, press  Colour Start to print.
 
						

							
Printing photos from a memory card or USB Flash memory drive37
5
Remove Red-Eye5
The machine detects eyes in your photos and 
will remove red-eye from your photo.
Note
There are some cases when red-eye may 
not be removed.• When the face is too small in the  image.
• When the face is turning too far up,  down, left or right.
 
aMake sure you have put a memory card 
or USB Flash memory drive in the 
correct slot.
Press ( PhotoCapture ). 
bPress a or  b to choose  
Photo Effects .
Press  OK.
cPress  d or  c to choose your photo.
Press  OK.
dPress  a or  b to choose  
Remove Red-Eye .
Press  OK.
„ When  Remove Red-Eye  is 
successful, the photo after effect is 
shown. The adjusted part is shown in 
a red frame.
„ When  Remove Red-Eye  is 
unsuccessful, 
Unable to Detect.  is shown.
Note
Press a to try Remove Red-Eye again. 
 
ePress  OK and  + or  - repeatedly to enter 
the number of copies you want.
fDo one of the following.
„ Press  OK and change the print 
settings. (See page 41.)
„ If you do not want to change any 
settings, press  Colour Start to print.
Monochrome5
You can convert your photo to monochrome.
aMake sure you have put a memory card 
or USB Flash memory drive in the 
correct slot.
Press ( PhotoCapture ). 
bPress a or  b to choose  
Photo Effects .
Press  OK.
cPress  d or  c to choose your photo.
Press  OK.
dPress  a or  b to choose   Monochrome .
Press  OK.
ePress  OK and  + or  - repeatedly to enter 
the number of copies you want.
fDo one of the following.
„ Press  OK and change the print 
settings. (See page 41.)
„ If you do not want to change any 
settings, press  Colour Start to print.
 
						

							
Chapter 5
38
Sepia5
You can convert the colour of your photo to 
sepia.
aMake sure you have put a memory card 
or USB Flash memory drive in the 
correct slot.
Press ( PhotoCapture ). 
bPress a or b to choose 
Photo Effects.
Press OK.
cPress  d or  c to choose your photo.
Press  OK.
dPress  a or  b to choose  Sepia.
Press  OK.
ePress  OK and  + or  - repeatedly to enter 
the number of copies you want.
fDo one of the following.
„ Press  OK and change the print 
settings. (See page 41.)
„ If you do not want to change any 
settings, press  Colour Start to print.
Search by Date5
You can find your photos based on date.
aMake sure you have put a memory card 
or USB Flash memory drive in the 
correct slot.
Press ( PhotoCapture ). 
bPress a or  b to choose 
Search by Date .
Press  OK.
cPress  a or  b to choose the date that you 
want to search from.
Press  OK.
dPress  d or  c to choose your photo.
Note
Press  d to view an older photo and press 
c  to view a more recent photo.
 
ePress  + or  - repeatedly to enter the 
number of copies you want.
fRepeat step d and step e until you 
have chosen all your photos.
gAfter you have chosen all your photos, 
do one of the following: 
„ Press  OK and change the print 
settings. (See page 41.) 
„ If you do not want to change any 
settings, press  Colour Start to print.
 
						

							
Printing photos from a memory card or USB Flash memory drive39
5
Print All Photos5
You can print all the photos on your memory 
card. 
aMake sure you have put a memory card 
or USB Flash memory drive in the 
correct slot.
Press (PhotoCapture ).
bPress a or  b to choose 
Print All Photos .
Press  OK.
cPress  + or  - repeatedly to enter the 
number of copies you want.
dDo one of the following: 
„ Change the print settings. 
(See page 41.) 
„ If you do not want to change any 
settings, press  Colour Start to print.
Slide show5
You can view all your photos on the LCD 
using Slide show. You can also choose a 
photo during the operation.
aMake sure you have put a memory card 
or USB Flash memory drive in the 
correct slot.
Press ( PhotoCapture ). 
bPress a or  b to choose  Slide show .
Press  OK.
cPress  Stop/Exit  to finish Slide show.
Printing a photo during Slide show5
aPress OK to stop at one image while 
Slide show is operating.
b Press  + or  - repeatedly to enter the 
number of copies you want.
cDo one of the following: 
„ Press  OK and change the print 
settings. (See page 41.) 
„ If you do not want to change any 
settings, press  Colour Start to print.
 
						

							
Chapter 5
40
Trimming5
You can trim your photo and print a part of the 
image. 
Note
If your photo is very small or has irregular 
proportions you may not be able to trim 
the photo. The LCD will display 
Image Too Small. or 
Image Too Long. .
 
aMake sure you have put a memory card 
or USB Flash memory drive in the 
correct slot.
Press (PhotoCapture ).
bPress a or  b to choose  Trimming.
Press  OK.
cPress  d or  c to choose your photo.
Press  OK.
dAdjust the red frame on your photo.
The part inside of the red frame will be 
printed.
„ Press  + or  - to enlarge or reduce the 
frame size.
„ Press each arrow key to move the 
position of the frame.
„ Press  Ink Management  to rotate the 
frame.
„ Press  OK when you have finished 
the frame setting.
ePress  + or  - repeatedly to enter the 
number of copies you want.
fDo one of the following: 
„ Press  OK and change the print 
settings. (See page 41.) 
„ If you do not want to change any 
settings, press  Colour Start to print.
DPOF printing5
DPOF stands for Digital Print Order Format.
Major digital camera manufacturers (Canon 
Inc., Eastman Kodak Company, Fuji Photo 
Film Co. Ltd., Matsushita Electric Industrial 
Co. Ltd. and Sony Corporation) created this 
standard to make it easier to print images 
from a digital camera.
If your digital camera supports DPOF 
printing, you will be able to choose on the 
digital camera display the images and 
number of copies you want to print.
When the memory card (CompactFlash
®, 
Memory Stick
®, Memory Stick Pro™, 
SecureDigital MultiMediaCard™ or 
xD-Picture Card™) with DPOF information is 
put into your machine, you can print the 
chosen image easily.
aMake sure you have put a memory card 
in the correct slot.
Press  ( PhotoCapture ). The 
machine will ask you if you want to use 
DPOF setting.
bPress  + to choose  Yes.
cDo one of the following:
„ Change the print settings. 
(See page 41.)
„ If you do not want to change any 
settings, press  Colour Start to print. 
 
						

							
Printing photos from a memory card or USB Flash memory drive41
5
PhotoCapture Center™ print settings5
You can change the print settings temporarily for the next print. 
The machine returns to its default settings after 3 minutes.
Note
You can save the print settings you use most often by setting them as default. (See  Setting 
your changes as a new default on page 44.)
 
 
1 No. of prints
(For View Photo(s), Search by Date, Slide Show)
You can see the total number of photos that will be printed.
(For Print All Photos, Print Photos, Photo Effects, Trimming)
You can see the number of copies of each photo that will be printed.
(For DPOF printing) This does not appear.
Menu SelectionsOptions 1Options 2Page
Print Quality
(Does not appear for 
DPOF printing.) Normal
/Photo —42
Paper Type Plain Paper /Inkjet Paper /
Brother Photo /Other Photo —42
Paper Size Letter /A4 /10x15cm /13x18cm (When A4 or Letter is chosen)
10x8cm
13x9cm
15x10cm
18x13cm
20x15cm
Max. Size 42
Brightness
(Does not appear 
when 
Photo Effects  is 
chosen.) —43
Contrast
(Does not appear 
when 
Photo Effects  is 
chosen.) —43
Print Settings
Print Quality
PHOTO
Paper  Type
Paper Size
0
Brightness 10
x15 cm
Other Photo
0001Photo
Print Start Press
Print Size
Max. Size
1
Dark
Light
 
						

							
Chapter 5
42
Print Speed and Quality5
aPress  a or  b to choose 
Print Quality .
bPress  d or  c to choose  Normal or 
Photo .
Press  OK.
cIf you do not want to change additional 
settings, press  Colour Start to print. 
Paper options5
Paper Type5
aPress a or  b to choose  Paper Type .
bPress  d or  c to choose the type of paper 
you are using,  Plain Paper , 
Inkjet Paper , Brother Photo  or 
Other Photo . 
Press  OK.
cIf you do not want to change additional 
settings, press  Colour Start to print. 
Paper and print size5
aPress a or  b to choose  Paper Size .
bPress  d or  c to choose the paper size 
you are using,  Letter, 10x15cm , 
13x18cm  or A4.
Press  OK.
cIf you chose Letter or A4, press  d or  c to 
choose the print size.
Press  OK.
dIf you do not want to change additional 
settings, press  Colour Start to print. 
Color Enhance
(Does not appear 
when 
Photo Effects  is 
chosen.) On
/Off
White Balance  
Sharpness  
Color Density  
Exit —43
Cropping On /Off —44
Borderless On /Off —44
Set New Default Yes /No —44
Factory Reset Yes /No —44
Menu SelectionsOptions 1Options 2Page
Example: Printed Position for A4 paper
1
10x8cm 2
13x9cm3
15 x 10cm
 
  
4
18 x 13cm5
20x15cm6
Max. Size