Brother DCP 7030 User Manual

							Troubleshooting and routine maintenance
75
B
Packing and shipping 
the machine
B
CAUTION 
Make sure that the machine has fully 
cooled down by leaving it disconnected 
from the power for at least 30 minutes 
before packing.
 
When you transport the machine, use the 
packing materials that came with your 
machine. If you do not pack the machine 
correctly, you could void your warranty.
aTurn off the machine’s power switch.
bUnplug all the cables and AC power 
cord from the machine.
cOpen the front cover.
dRemove the drum unit and toner 
cartridge assembly. Leave the toner 
cartridge installed in the drum unit.
ePlace the drum unit and toner cartridge 
assembly into the plastic bag and seal 
the bag.
fClose the front cover.
gWrap the machine in the plastic bag and 
place it in the original carton with the 
original packing material.
hPack the drum unit and toner cartridge 
assembly, AC cord and printed 
materials in the original carton as shown 
below:
 
iClose the carton and tape it shut.
 
						

							76
C
On-screen 
programming
C
Your machine has been designed to be easy 
to use. The LCD provides on-screen 
programming using the menu keys.
We have created step by step on-screen 
instructions to help you program your 
machine. Simply follow the steps as they 
guide you through the menu selections and 
programming options.
Menu tableC
You can program your machine by using the 
Menu table on page 78. These pages list the 
menu selections and options.
Press Menu followed by the menu numbers 
to program your machine. 
For example, to set Beeper volume to Low:
aPress Menu.
bPress a or b to choose 1.General Setup.
Press OK.
cPress a or b to choose 3.Beeper.
Press OK.
dPress a or b to choose Low.
PressOK.
ePress Stop/Exit.
Memory storageC
Your menu settings are stored permanently, 
and in the event of a power failure will not be 
lost. Temporary settings (for example, 
Contrast) will be lost. 
Menu keysC
Menu and featuresC
 
 
Access the menu.
 Go to the next menu level.
Accept an option.
 Exit the menu by pressing 
repeatedly.
Go back to the previous 
menu level.
 Scroll through the current 
menu level.
 Exit the menu.
 
						

							Menu and features
77
C How to access the menu 
modeC
aPress Menu.
bScroll through each menu level by 
pressing a or b for the direction you 
want.
cPressOK when the option you want 
appears on the LCD.
The LCD will then show the next menu 
level.
dPress a or b to scroll to your next menu 
selection.
ePressOK.
When you have finished setting an 
option, the LCD will show Accepted.
fPressStop/Exit to exit Menu mode.
 
						

							78
Menu tableC
The factory settings are shown in Bold with an asterisk.
Choose & OK Choose & OK to accept to exit
              
Main Menu Submenu Menu Selections Options Descriptions Page
1.General
Setup1.Paper Type—Plain*
Plain (Thick)
Thick
Thicker
Transparency
Recycled PaperSets the type of 
paper in the paper 
tray.17
2.Paper Size—A4*
Letter
Executive
A5
A6
B5
B6Sets the size of the 
paper in the paper 
tray.17
3.Beeper—Off
Low
Med*
HighAdjusts the volume 
level of the beeper.17
4.Ecology 1.Toner SaveOn
Off*Increases the page 
yield of the toner 
cartridge.18
2.Sleep Time(00-99)
05Min*Conserves power. 18
 
The factory settings are shown in Bold with an asterisk.
 
						

							Menu and features
79
C
1.General
Setup
(continued)5.LCD Contrast—b -nnnno+ a
b -nnnon+ a
b -nnonn+ a*
b -nonnn+ a
b -onnnn+ aAdjusts the contrast 
of the LCD.19
6.User Settings— — Lists your current 
settings.       19
0.Local Language—English
Chinese*Allows you to 
change the LCD 
language.74
2.Copy 1.Quality—Auto*
Text
PhotoYou can choose the 
Copy resolution for 
your type of 
document.25
2.Contrast—b -nnnno+ a
b -nnnon+ a
b -nnonn+ a*
b -nonnn+ a
b -onnnn+ aAdjusts the contrast 
for copies.24
3.Machine
Info.1.Serial No.— — You can check the 
serial number of 
your machine.74
2.Page Counter—Total
List
Copy
PrintYou can check the 
number of total 
pages the machine 
has printed during 
its life.74
3.Drum Life— — You can check the 
percentage of a 
Drum life that 
remains available.74
The factory settings are shown in Bold with an asterisk. Main Menu Submenu Menu Selections Options Descriptions Page
 
						

							
80
D
GeneralD
SpecificationsD
Printer TypeLaser
Print Method Electrophotography by semiconductor laser beam scanning
Memory Capacity 16 MB
LCD (liquid crystal display)  characters × 2 lines
Power Source 220 - 240V 50/60Hz
Power Consumption Peak: 1056 W
Copying:
Average 320 W
1
Sleep: (DCP-7030)
Average 8 W
(DCP-7040)
Average 9 W
Standby: Average 75 W
1When making a copy from one sheet
Dimensions DCP-7030
 
DCP-7040
 
257 mm
396 mm
428 mm
304 mm
396 mm
428 mm
10
 
						

							Specifications
81
D
WeightWithout Drum/Toner Unit:
(DCP-7030) 8.7 kg
(DCP-7040) 10 kg
Noise levelSound power
Operating 
(Copying):LWAd = 6.2 Bell
Standby: LWAd = 4.4 Bell
Sound 
pressure
Operating 
(Copying):LpAm = 53 dBA
Standby: LpAm = 32 dBA
TemperatureOperating: 10 to 32.5°C
Storage: 5 to 35°C
HumidityOperating: 20 to 80% (without condensation)
Storage: 10 to 90% (without condensation)
ADF (automatic document 
feeder)(DCP-7040 only)
Up to 35 pages (Staggered) [80 g/m
2]
Recommended Environment for Best Results:
Temperature: 20 to 30°C
Humidity: 50% - 70%
Paper:
APP Blue Flagship 70 g/m
2
APP Gold Flagship 80 g/m2
Advanced Agro Double A 80 g/m2
Paper Tray
250 Sheets [80 g/m2]
 
						

							82
Print mediaD
1For transparencies and labels, we recommend removing printed pages from the output paper tray immediately after 
they exit the machine to avoid the possibility of smudging.
Paper Input  Paper Tray
„Paper Type:
Plain paper, Transparencies
1 or Recycled 
paper
„Paper Size: Letter, A4, B5 (ISO), A5, B6 (ISO), A6 and 
Executive
„Paper Weight:
60 to 105 g/m
2
„Maximum paper tray capacity:
Up to 250 sheets of 80 g/m2 plain paper
Manual Feed Slot
„Paper Type: Plain paper, Transparencies, Recycled 
paper, Bond paper, Envelopes or Labels
1
„Paper Size: Width: 76.2 to 220 mm
Length:116 to 406.4 mm
„Paper Weight:
60 to 163 g/m
2
„Maximum manual feed slot 
capacity:One sheet at a time
Paper OutputUp to 100 sheets (face down print delivery to the output paper tray)
 
						

							Specifications
83
D
CopyD
1The first copy out time may vary depending on scanner lamp warm up time.
Colour/MonochromeMonochrome
Document Size(DCP-7040 only) ADF Width: 148,0 to 215.9 mm
(DCP-7040 only) ADF Length: 148,0 to 355.6 mm
Scanner Glass Width: Max. 215.9 mm
Scanner Glass Length: Max. 297 mm
Copy Width: Max. 210 mm
Multiple CopiesStacks up to 99 pages
Sorts up to 99 pages (DCP-7040 only)
Reduce/Enlarge25% to 400% (in increments of 1%)
ResolutionUp to 600 × 600 dpi
First Copy Out Time
Less than 15 seconds (from Ready state)
1
 
						

							84
ScanD
1Maximum 1200 × 1200 dpi scanning with the WIA driver in Windows® XP/Windows Vista® (resolution up to 19200×19200 dpi 
can be chosen by using the Brother scanner utility)
Colour/MonochromeYes
TWAIN Compliant
Yes (Windows
®2000 Professional/XP/ 
XP Professional x64 Edition/Windows Vista
®)
Mac OS
® X 10.2.4 or greater
WIA Compliant
Yes (Windows
® XP/Windows Vista®)
Colour Depth24 bit colour
Resolution
Up to 19200 × 19200 dpi (interpolated)
1
Up to 600 × 2400 dpi (optical) (From Scanner Glass)
(DCP-7040 only) Up to 600 × 600 dpi (optical) (From ADF)
Document Size(DCP-7040 only) ADF Width: 148.0 to 215.9 mm
(DCP-7040 only) ADF Length: 148.0 to 355.6 mm
Scanner Glass Width: Max. 215.9 mm
Scanner Glass Length: Max. 297 mm
Scanning WidthMax. 210 mm
Grey Scale256 levels