Brother Dcp 6690cw User Manual

Printing photos from a memory card or USB Flash memory drive53
5
How to change the file name5
You can change the file name.
aPress (Scan).
bPress  Scan to Media .
cPress d or  c to display  File Name .
dPress File Name .
Press   to delete characters. Then 
enter the new file name (up to 
6 characters). (See  Entering Text 
on page 111.)
ePress  OK.
How to set new default5
You can set your own default setting.
aPress ( Scan).
bPress  Scan to Media .
cPress and choose your new setting.
Repeat this step...

54
6
Printing photos 
directly from a 
PictBridge camera
6
 
Your Brother machine supports the 
PictBridge standard, allowing you to connect 
to and print photos directly from any 
PictBridge compatible digital camera.
If your camera is using the USB Mass 
Storage standard, you can also print photos 
from a digital camera without PictBridge. See 
Printing photos directly from a digital camera  
(without PictBridge)  on page 56.
PictBridge requirements6
To avoid errors, remember the following 
points:
„...

Printing photos from a camera55
6
Printing Images6
Note
Remove any memory cards or USB Flash 
memory drive from the machine before 
connecting a digital camera.
 
aMake sure that your camera is turned 
off. Connect your camera to the USB 
direct interface (1) on the machine using 
the USB cable.
 
1 USB direct interface
bTurn on the camera.
When the machine has recognized the 
camera, the LCD shows 
Camera Connected.
cChoose the photo you want to print 
following the instructions from your 
camera.
When...

Chapter 6
56
Printing photos 
directly from a digital 
camera 
(without PictBridge)
6
If your camera supports the USB Mass 
Storage standard, you can connect your 
camera in storage mode. This enables you to 
print photos from your camera.
If you would like to print photos in PictBridge 
mode, see  Printing photos directly from a 
PictBridge camera  on page 54. 
Note
The name, availability and operation differ 
among digital cameras. Please refer to the 
documentation supplied with your camera 
for...

Printing photos from a camera57
6
Understanding the 
Error Messages
6
Once you are familiar with the types of errors 
that can occur while you are printing from a 
camera, you can easily identify and 
troubleshoot any problems.„ Out of Memory
This message will appear if you are 
working with images that are too large for 
the machines memory.
„ Unusable Device
This message will appear if you connect a 
camera that is not using the USB Mass 
Storage standard. This message will also 
appear if you connect...

Chapter 6
58
 

Section IV
SoftwareIV
Software and Network features60
 

60
7
The CD-ROM includes the Software User’s 
Guide and Network User’s Guide for features 
available when connected to a computer (for 
example, printing and scanning). These 
guides have easy to use links that, when 
clicked, will take you directly to a particular 
section.
You can find information on these features:„ Printing
„ Scanning
„ ControlCenter3 (for Windows
®)
„ ControlCenter2 (for Macintosh
®)
„ Remote Setup
„ PhotoCapture Center™ 
„ Network Printing
„ Network Scanning
„ Wired and Wireless...

Section V
AppendixesV
Safety and Legal62
Troubleshooting and Routine Maintenance73
Menu and Features96
Specifications112
Glossary125
 

62
A
Choosing a locationA
Put your machine on a flat, stable surface that is free of vibration and shocks, such as a desk. Put 
the machine near a standard grounded electrical socket. Choose a location where the 
temperature remains between 10°C and 35 °C.
WARNING 
DO NOT put the machine near heaters, air conditioners, refrigerators, medical equipment, 
chemicals or water.
  
DO NOT connect your machine to electrical sockets on the same circuit as large appliances or 
other equipment that might disrupt...