Brother Dcp 6690cw User Manual

Printing photos from a memory card or USB Flash memory drive43
5
Entering PhotoCapture mode5
After you insert the memory card or USB 
Flash memory drive, press the (Photo Capture ) key to illuminate it in 
blue and display the PhotoCapture options on 
the LCD.
The LCD shows:
 
„ Press  View Photos  if you want to 
quickly view and print your photos. See 
View Photos  on page 43.
„ Press  Enhance Photos  if you want to 
add special effects to your photos. See 
Enhance Photos  on page 44.
„ Press  Index...

Chapter 5
44
fAfter you have chosen all the photos, do 
one of the following: „ Press  OK and change the print 
settings. Press  Print Setting . 
(See page 47.) 
„ If you do not want to change any 
settings, press  OK and then 
Colour Start  to print.
Enhance Photos5
You can edit and add effects to your photos 
and view them on the LCD before printing.
Note
The Enhance Photos feature is supported 
by technology from Reallusion, Inc. 
 
aMake sure you have put a memory card 
or USB Flash memory drive in...

Printing photos from a memory card or USB Flash memory drive45
5
• There are some cases when red-eye may not be removed.
•
When the face is too small in the image.
• When the face is turning too far up,  down, left or right.
• After adding each effect, you can enlarge  the view of the image by pressing  . To 
go back to the original size, press  .
•
While the image is enlarged, you can move 
around the image with  ,  ,   and  . 
Press 
Cancel to return to the list of 
effects.
 
gAdjust the red frame...

Chapter 5
46
ePress  Paper Type .
Choose the paper type you are using, 
Plain Paper , Inkjet Paper , 
Brother BP71  or Other Glossy .
fPress Paper Size .
Choose the paper size you are using, 
Letter  or A4.
gPress  Colour Start  to print.
Printing Photos5
Before you can print an individual image, you 
have to know the image number.
aMake sure you have put a memory card 
or USB Flash memory drive in the 
correct slot.
Press ( Photo Capture ). 
bPrint the Index. (See  Index Print 
(Thumbnails)  on page...

Printing photos from a memory card or USB Flash memory drive47
5
PhotoCapture Center™ print settings5
You can change the print settings temporarily. 
Note
You can save the print settings you use most often by setting them as the default. (See  Setting 
your changes as a new default  on page 50.)
 
 
Menu SelectionsOptions 1Options 2Page
Print Quality
(Not available for 
DPOF printing.) Normal
/Photo —48
Paper Type Plain Paper /Inkjet Paper / 
Brother BP71 /Other Glossy —48
Paper Size 10x15cm/13x18cm /...

Chapter 5
48
Print Speed and Quality5
aPress  a or  b to display 
Print Quality .
bPress Print Quality .
cPress and choose  Normal or Photo .
dIf you do not want to change additional 
settings, press  .
Press Colour Start  to print. 
Paper options5
Paper Type5
aPress a or  b to display  Paper Type .
bPress Paper Type .
cPress and choose the paper type you 
are using, Plain Paper , 
Inkjet Paper , Brother BP71  or 
Other Glossy .
dIf you do not want to change additional 
settings, press  .
Press Colour...

Printing photos from a memory card or USB Flash memory drive49
5
Adjusting Brightness, 
Contrast and Colour5
Brightness5
aPress 
a or  b to display  Brightness .
bPress Brightness .
cPress d or  c to make a darker or lighter 
print.
Press  OK.
dIf you do not want to change additional 
settings, press  .
Press  Colour Start  to print.
Contrast5
You can choose the contrast setting. More 
contrast will make an image look sharper and 
more vivid.
aPress a or  b to display  Contrast .
bPress Contrast ....

Chapter 5
50
Cropping5
If your photo is too long or wide to fit the 
available space on your chosen layout, part 
of the image will automatically be cropped.
The factory setting is  On. If you want to print 
the whole image, turn this setting to  Off. If 
you are also using the Borderless setting, 
turn  Borderless  to Off . (See  Borderless 
printing  on page 50.)
aPress a or  b to display  Cropping .
bPress Cropping .
cPress Off (or On).
dIf you do not want to change additional 
settings, press  ....

Printing photos from a memory card or USB Flash memory drive51
5
Restoring all settings to the 
factory settings5
You can restore all the settings you have 
changed to the factory settings. These 
settings will stay until you change them again.
aPress 
a or  b to display 
Factory Reset .
bPress Factory Reset .
cPress Yes to confirm.
dPress  Stop/Exit .
Scan to a memory card 
or USB Flash memory 
drive
5
Entering Scan mode5
When you want to scan to a memory card or 
USB Flash memory drive, press 
(Scan...

Chapter 5
52
How to scan to a memory card 
or USB Flash memory drive5
You can scan monochrome and colour 
documents into a memory card or USB Flash 
memory drive. Monochrome documents will 
be stored in PDF (*.PDF) or TIFF (*.TIF) file 
formats. Colour documents may be stored in 
PDF (*.PDF) or JPEG (*.JPG) file formats. 
The factory setting is  Color 150 dpi and 
the default file format is PDF. The machine 
automatically creates file names based on 
the current date. (For details, see the Quick 
Setup...