Boxlight Projectowrite 2 User Manual

							28
MENU (Video Mode)
Audio MenuStep: 
1. Use the  / buttons to 
select an item.
2. Use the  /  buttons  to select an item or  
adjust the value.
Item Selection Description
VOLUME 00/40 Adjust the volume.
MUTE OFF/ON Mute the volume OFF / ON.  
						

							29
MENU (Video Mode)
Setting MenuStep: 
1. Use the  /buttons to select an item.
2. Use the  /  buttons  to select an item or  
adjust the value.
Item Selection Description
AUTO KEYSTONE OFF/ON Automatically Correct keystone distortion in image.
KEYSTONE V -70/+70 Correct vertical keystone distortion in image manually.
AUTO SEARCH OFF/ON Search signal source manually or automatically.  
						

							MENU
30
MENU
Advanced MenuStep: 
1. Use the  /buttons to select an item.
2. Use the  /  buttons  to select an item or  
adjust the value.
Item Selection Description
ZOOM / PAN EXECUTE Execute digital zoom and pan function.
FREEZE OFF/ON Freeze the current image on the screen.
BLANK OFF/ON Hide the image, display a black screen.
BLANK POWER OFF 15/30/60  
Minute
Set power off time after blank.
RESET EXECUTE Reset all menu function to their factory default values.
RESIZE 4:3,16:9, 1:1
LANGUAGE ENGLISH Select the language that the menu and on screen massage is 
display in
EnglishĜ[
1T
[
ãÄ.†

Nederlands
Français
Deutsch
Italiano
SuomiPolski Português
Español
Svenska


SELECT SOURCE EXECUTE Select the input source from:
RGB 1       RGB 2 
S-Video
Video
DVI-I
Y,Pb,Pr
The search is started from the current port. Then when an  
input is found, the projector will stop searching and display 
the image.
LOGO SETTING EXECUTE Customize the start-up logo.  
						

							31
MENU
Advanced MenuLOGO SETTING 
This function allows you  
to customize the start-up 
logo. 
IMPORTANT: 
To execute the logo  
function, you must enter 
the PIN code rst. 
Item Selection Description
LOGO MODEDEFAULT 
USER
OFF Select Mode(  cursor button) 
The factory logo. 
The image you captured.
The blank image. You can select color with background 
function.
LOGO
CAPTURE EXECUTE Start to capture the image.(PC mode only)
BACKGROUND BLACK
BLUE
WHITESet background color.
LOGO SIZE ORIGINAL
FULL Display the captured image in original size and put in the 
center of the screen.
Expend the image to full screen.  
						

							32
MENU
NOTE  To capture an image is available only in computer mode.
  The area that can be captured is 512 x 384 dots.
Advance Menu
Logo Capture 
How to use this function?
 Select Logo Capture item in the logo 
setting menu, and press  button.
  You can see the red frame to select 
captured area.
  Use 4 direction buttons to adjust the 
position of the frame.
  Press “MENU” to start capturing and 
display a dialog.

Image

Logo Capture In Progress. 
						

							33
MENU
Presentation MenuStep: 
1. Use the  /buttons to select an item.
2. Use the  /  buttons  to select an item or  
adjust the value.
Item Selection Description
AUTO CEILING OFF / ON Automatically invert the image when the projector is turned  
upside down, i.e. when the projector is mounted on the 
ceiling.
FRONT EXECUTE Normal projection mode. 
CEILING EXECUTE Mirror the image vertically, only for the projector mounted  
upside down.
REAR EXECUTE Mirror the image horizontally, only for projecting onto rear 
projection screen.
CEILING AND 
REAR EXECUTEMirror the image horizontally and vertically. Proje
cting onto 
a rear projection screen while projector is upside  down.
LAMP MODE NORMAL / 
ECONOMICSwitch lamp mode between normal or ECO mode.
LAMP Show lamp use time. 
RESET LAMP  
TIMER EXECUTEAfter changing a new lamp, execute this function to reset 
the lamp timer.  
						

							34
MENU
NOTE
  The replacement warning message is set to appear after about 2000 hours of lamp use in order to maintain the initial brightness. When replacement message appears, replace the lamp with a  
new one as soon as possible, even if the lamp is still workable.
Presentation Menu
Reset Lamp Timer 
The lamp timer is the time counted after the last resetting. The usage time of the lamp  
is shown in the PRESENTATION Menu. Pressing the RESET button or the  button 
displays a dialog. 
To reset the lamp time, select the RESET using the  button.  
						

							35
MENU
Security MenuStep: 
1. Use the  /buttons to select an item.
2. Use the  /  buttons  to select an item or  
adjust the value.
Item Selection Description
PIN LOCK  
PROTECTION OFF 
ON 1 
ON 2OFF: Turn off PIN lock protection. 
ON 1:  PIN code is needed only in the rst time after AC 
power has been switched off.
ON 2:  PIN code is needed every time while the projector is 
turned on.
 CAUTION:
Once the PIN code had been set, the projector cannot  
be used unless you enter the correct PIN code.
 
MODIFY PIN EXECUTE 1. Press “ MENU ” on the projector or remote control. 
2.  Use the  button to select the MODIFY PIN item of the 
SECURITY category.
3.  Press the  button to change PIN LOCK PROTECTION  mode.
4. Please enter the original PIN code.
    (a)  If the PIN is correct, system will allow you to change  a new PIN code.
    (b)  If the PIN is incorrect, a “ Code Error ” message  will appear.
5. Please enter a new PIN code. And then enter again t o conrm.
NOTE:
(1)  To change the PIN lock protection state, you must 
enter the PIN code rst.
(2) Please enter: 0000 for rst-time use.
(3)  To avoid unnecessary trouble, if you activate the  [PIN 
Lock Protection], it is highly recommended that you  
write down the PIN code and store it in a safe plac e.  
						

							36
MENU
Security MenuStep: 
1. Use the  /buttons to select an item.
2. Use the  /  buttons to  select an item or adjust the  
value.
Item Selection Description
FILTER TIMER Show the lter use hour.
RESET FILTER 
TIMER  EXECUTE
Reset the lter timer after cleaning / changing lter.
FILTER COUNTER 500 hours
800 hours
1000 hoursSelect (500 / 800 / 1000 hours) depending on the 
environment.(default : 500 hours). Please see as below.
MAC ADDR. If purchasing LAN control module, MAC ADDR. will be 
shown in Security Menu. 
MAC address stands for unique Media Access Control 
address of LAN control module and displays with six  
groups of two hexadecimal digits.
CLOSED CAPTION OFF(Default) 
C.C1 
C.C2 
C.C3
C.C4
T1
T2
T3
T4The Closed Caption function intimates the sound effects, 
dialogue, and narration in the content of the television 
program or video source.
Caption (C.C1~C.C4) : Display closed caption Text 
(T1~T4) : Display text data, which is for additional 
information such as news reports or a TV program guide.
NOTE
 :  This function is available only in video / S-Video 
source.  
						

							37
MENU
NOTE
 Please reset the Filter time only when you replace the lter.
Auto Filter Alert
Auto Filter Alert is in SECURITY category to show the air lter use time and alert user to change  
lter. Pressing  cursor button will display a dialog. When the operating time reaches the set time, 
a warning message will appear on the screen to remind user of lter cleaning / replacing.
Filter Replace... 
Filter has been used for more than 500 hours.