Boxlight Projectowrite 2 User Manual

							18
Remote Control
-        VOL        +
INPUT
ESC
MENU
AutoK
Still Blank
-        VOL        +
INPUT 
Select input source:
RGB 1       RGB 2 
S-Video
Video
DVI-I
Y,Pb,Pr
Menu up / down 
Menu left / right
Select and adjust the function of On-Screen  
Display.
Auto
Refresh the current image.
Blank
Hide the current image, become black color on 
the screen.
Quick Key: 
If it is not in the OSD menu of screen,  
you could press the buttons as seen on 
the left. 
Press 
 button to select item.
Keystone Brightness
Contrast
Volume
Press  button to select item. 
						

							19
Remote Control (Optional)
Remote Control Batteries Installation
1. Remove the battery cover.  
2. Load the batteries. 
   Make sure the poles are correctly oriented. 
3. Close the battery cover.
 Caution
Avoid excessive heat and humidity. 
Do not drop the remote control.
 If the remote control will not be used for an extended period, remove the batteries. 
 Do not expose the remote control to water or moisture. This could result in malfunction. 
 Replace the battery when remote control operation becomes sluggish or unresponsive.
 Do not place the remote control close to the cooling fan of the projector. 
 Do not use batteries of different types at the same time. 
 Do not mix a new battery with used one. Make sure the plus and terminals are correctly  aligned when loading batteries.
 Dispose of batteries in accordance with environmental laws.
 Do not disassemble the remote control. If the remote control needs service, please contact  your dealer.  
						

							Remote Control (Optional)
20
Remote Control (Optional)
POWERLASER
MOUSE-L
AUTO BLANK
MOUSE-R
MUTE
MENU
INPUT
LASER 
INDICATOR
POWER
Power on / operation mode, Standby mode,  
Cool down mode.
INPUT
Select input source :
RGB 1       RGB 2 
S-Video
Video
DVI-I
Y,Pb,Pr
MENU
Display or hide the On-Screen Display main menu  
page.
 
Press  or  to select On-Screen 
Display menu item.
 
Press  or  to select and adjust the 
function of On-Screen Display menu item or value.
LASER
Aim the remote control at the screen, press and  
hold button to activate the laser pointer.
MUTE
Mute audio.
AUTO
Refresh the current image.
BLANK
Hide the current image, become black color on the 
screen.
Press / / /  button to move 
arrow direction of window.
MOUSE-L / MOUSE-R
The function is like mouse of desktop/ notebook. 
Remote control’s mouse functions only will work  
if the USB cable is connected (see page 15 for 
instructions) 
						

							Menu Operation
21
Remote Control (Optional)
Remote Control Batteries Installation
1. Remove the battery cover.  
2. Loading the batteries. 
   Make sure the plus and minus poles are correctly oriented.
3. Close the battery cover.
 Caution
1. Avoid excessive heat and humidity. 
2. Do not drop the remote control.
3. Do not expose the remote control to water or moisture, this could result in malfunction. 
4. When the remote control will not be used for an extended period, remove the batteries. 
5. Replace the batteries when remote control operation becomes sluggish or unresponsive.
6. Do not place the remote control close to the cooling fan of the projector. 
7.  Do not disassemble the remote control. If the remote control needs service. Please bring it  to the service station. 
						

							22
Remote Control (Optional)
Power 
Power on / operation mode, Standby mode,  
Cooling-down mode. 
ESC 
Press ”ESC” button, it will close ”Menu”  
picture. 
Vol +/- 
Sound louder or lower.
Menu 
Display or hide the OSD main menu page. 
Keystone +/-
Adjusts the vertical keystone function.
Still 
Keep the current image on the Screen. 
Blank
Hide the current image,become black color on  
the screen. 
Auto 
Refresh the current image.
Menu up/down, Menu left/right
Selecting and adjusting the function of OSD. 
INPUT source 
Select input source: 


	



	







	










Mouse 
Select an item or adjust value in the On- 
Screen Menu. 
Zoom in / Zoom out 
Zoom in or zoom out. 
Mute
Mute audio. 
Laser pointer 
Use laser pointer from remote control. 
						

							23
Menu Operation
How To Operate On-Screen Display
1.  You could press Menu button. It will be shown blue main menu. The rst main menu is  PICTURE menu.
2.  Choose which item you want to enter, you could press up / down /left/  right button of control panel or remote control to adjust item or value.
Up / Down / Right / Left button
Menu button
007
- VOL +
INPUT
ESC
MENU
AutoK
Still Blank
POWER
LASER
MOUSE-LAUTO BLANKMOUSE-R
MUTE
MENU
INPUTLASER 
INDICATOR
Power Laser
Menu  
						

							MENU (PC Mode)
24
MENU (PC Mode)
Picture MenuStep: 
1. Use the  / buttons to 
select an item.
2. Use the  /  cursor  buttons to select an item  
or adjust the value.
Item Selection Description
BRIGHTNESS 000/100 Adjust the image brightness level.
CONTRAST 000/100 Adjust the image contrast level.
SHARPNESS 000/015 Adjusts the image sharpness.
DISPLAY MODE NATURAL Natural color. 
CINEMA Enhance contrast ratio when displaying DVD contents. 
DAYLIGHT Suitable when ambient light is strong.
GREEN BOARD 
WHITE BOARD
BLACK BOARD
Adjust the color settings to make the projected image on 
a (green, white, black) board more visible.
USER User Red     000/100
User Green  000/100
User Blue    000/100
007  
						

							25
MENU (PC Mode)
Audio MenuStep: 
1. Use the  / buttons 
to select an item.
2. Use the  /   buttons to select an  
item or adjust the 
value.
Item Selection Description
VOLUME 00/40 Adjust the volume.
MUTE OFF/ON Mute the volume OFF / ON.  
						

							26
MENU (PC Mode)
Setting MenuStep: 
1. Use the  /buttons to select an item.
2. Use the  /  buttons  to select an item or  
adjust the value.
Item Selection Description
H POSITION 000/100 Move the image position horizontally. 
This function is only selected for computer signal.
V POSITION 000/100 Move the image position vertically.
This function is only selected for computer signal.
PHASE 000/100 Adjust the image sharpness.
FREQUENCY 000/200 Set the horizontal scanning frequency. AUTO
KEYSTONE OFF/ON Correct keystone distortion in image automatically.
KEYSTONE V -70/+70 Correct vertical keystone distortion in image manually. AUTO SYNC EXECUTE Set all of the above setting automatically.
AUTO SEARCH OFF/ON Search signal source manually or automatically.
*DVI doesnt support H POSITION, V POSITION, PHASE, FREQUENCY and AUTO SYNC.  
						

							MENU (Video Mode)
27
MENU (Video Mode)
Picture MenuStep: 
1. Use the  / buttons 
to select an item.
2. Use the  /  cursor  buttons to select an  
item or adjust the 
value.
Item Selection Description
BRIGHTNESS 000/100 Adjust the image brightness level.
CONTRAST 000/100 Adjust the image contrast level.
SHARPNESS 000/015 Adjusts the image sharpness.
COLOR 000/100 Adjust the strength of whole color. 
This function can be used under video signal, S-Video 
signal, or component video signal input only. 
TINT 000/100 Adjust the image tint.
This function can be used under video signal, S-Video 
signal, or component video signal.
DISPLAY MODE NATURAL Natural color. 
CINEMA Enhance contrast ratio when displaying DVD contents. 
DAYLIGHT Suitable when ambient light is strong. 
GREEN BOARD 
WHITE BOARD
BLACK BOARD
Adjust the color settings to make the projected image on 
a (green, white, black) board more visible.
USER User Red 
User Green
User Blue
007