Boxlight Projector P7 WX32N User Manual
Here you can view all the pages of manual Boxlight Projector P7 WX32N User Manual. The Boxlight manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 41
40 Setting High land Enable to control the fan through the Setting menu. You can select the running speed of the fan according to the altitude of the location where the projector is installed. Off......Normal speed. Set it Off if the projector is operated at a lower altitude. On......Faster than Off. Set it On if the projector is operated at a higher altitude because fans will produce weaker effects. Note: Plese set High land "On" when operating the...
Page 42
41 Setting Key lock This function allows you to use the Key lock and PIN code lock function to set the security for the projector operation. Select "Key lock" and press OK button, then press button to select the item you desire . Off ......................Unlock. Projector ........... Lock the operation of the.top control. To unlock, use the...
Page 43
42 Iris This function is used to increase the contrast of the image. On....Enable Iris function, increase the contrast of the image. Off....Disable Iris function. Terminal The VGA IN 2/VGA OUT terminal can be used as computer input or monitor output.Press ▲ to select input or output. VGA IN 2 ....... VGA 2 input VGA OUT..........Monitor out Sound This item is used to adjust the volume. Sound.. .Press button to increase the volume, press button to...
Page 44
43 Expand The projector has Expand menu that allows you to set the other various expand functions described as follows.Expand menu Auto setup PC adjust Display Color adjust Setting Expand Info. Move Next Exit Language Auto setup Logo Security Power management Filter counter Test pattern Network Factory default PC adjust Display Color adjust Setting Expand Info. Move Next Back Auto setup Input search On Auto PC adj. On Auto keystone Auto Language...
Page 45
44 Expand Logo This function allows you to customize the screen logo with Logo select, Capture, Logo PIN code lock and Logo PIN code change functions. Logo SelectThis function decides on the starting-up display from among following options. Default .... Show the factory-set logo. User..........Show the image captured by user. Off ........... Show the countdown display only. Capture You can capture a projected image as start logo or interval of presentation. Select Capture and press OK button....
Page 46
45 This function allows you to use the PIN code lock and PIN code change functions to set the security for the projector operation. PIN code lock This function prevents the projector from being operated by unauthorized persons and provides the following setting options for security. Off ............Unlocked. On ........... Enter the PIN code every time turning on the projector.If you want to change PIN code lock setting or PIN...
Page 47
46 Expand Note: Factory default: "Ready: 5 min". Filter counter This function is used to set a frequency for filter cleaning. When the projector reached a specified time between cleanings, a Filter warning icon appears on the screen, notifying the cleaning is necessary. After cleaning the filter, be sure to select RESET and set the timer. The Filter warning icon will not turn off until the filter counter is reset. Filter counter...........The time that filter used....
Page 48
47 Expand Test Pattern This function is used to set the internal test signal:Gray scale 1,Gray scale 2,Gray scale 3,Gray scale 4, Color bar, Red, Green, Blue, Cross hatch,White,Black and Gray. Test PatternPC adjust Display Color adjust Setting Expand Info. Move Next Back Test Pattern Off Gray scale 1 Gray scale 2 Gray scale 3 Gray scale 4 Color bar Red Green Blue Cross hatch Network Function : PC controls projector via LAN. Preparation: 1. Equipments: PC,...
Page 49
48 Expand Factory default This function returns all setting values except for the User logo, PIN code lock, Logo PIN code lock, Lamp counter and Filter counter to the factory default settings. Network setting DHCP Off SetCancel IP address 0 0 0 0 Subnet 0 0 0 0 Gateway 0 0 0 0 DNS 0 0 0 0 Move Select Back...
Page 50
49 Infomation The information menu is used to detect signal of projected image and run\ ning state. Menu operation Press MENU button on the remote control to display the screen menu. Press to select Info., then press OK button, the information menu will appear as the right picture. The information below will display in information menu. Info. menu PC adjust Display Color adjust Setting Expand Info. Move Next Exit Input VGA IN 1 1024x768@60 H-sync freq....