Boxlight Projector P7 WX32N User Manual

20
Note:
● When the logo select is set to be "Off", the
   logo will not be displayed on the screen. 
1.Complete peripheral connections (with a 
   computer, VCR,etc.) before turning on the 
   projector.
2. Connect the projector’s AC power cord into 
    AC outlet.The POWER indicator turns red. 
3. Press the POWER button on top control or  
    on the remote control. The POWER indicator 
    becomes green and the cooling fans start to 
    work. The preparation display appears on 
    the...

21
Basic operation
Turn off the projector
Power off ?
“Power off ? ” disappears after 4 seconds.
1. Press the POWER button on top control 
    or on the remote control, and “Power off?”  
    appears on the screen.
2. Then, press the POWER button again in 4 
     seconds. The POWER indicator starts to 
    flash red, and the cooling fans keep running  
    (You can select the level of fans’ quietness 
    and running speed.). Now you can unplug 
    the AC power cord even if the fans are still...

22
Remote control
Screen menu Top control
MEMU
MENU
OK/INPUT 
OK 
  

 
1 Press the MENU button on the top control or 
   the remote control to display the screen menu.
2 Press 
 buttons to select an entry in the main 
   menu and then press OK  button to enter the 
   submenu.
3 Press
 buttons to select your required item, 
   and then press OK button to set or enter  
    required item.
4 Press 
 buttons to adjust settings or switch 
   among the items. Press the OK button for...

23
Menu bar
① PC adjust
   Adjust computer parameters to match with VGA input signal format: auto PC adj, Fine sync,      
     Total dots, Horizontal, Vertical, Display area H, Display area V.
②  Display
     - Screen Size: select the projecting image screen size.
        If a computer is selected as a signal source, the following setup options for the image size are 
        available: Normal, Wide, Custom.
        If video equipment is selected as a signal source, the following\
 setup options for the...

24
Auto setup functionAdjust zoom and foucus
This function is available just by pressing the  
AUTO button on the remote control. The system 
then automatically performs various settings in the 
setup menu, including input source search and 
auto pc adjust.
Rotate the zoom ring to zoom in or zoom out 
the image.
Rotate the focus ring to adjust the focus of the 
image.
Zoom ring
(back)
Remote control AUTO Focus ring
(front)
Basic operation  

25
VolumeRemote controlMUTE
VOLUME +/- 
Menu operation
Volume menu
Volume
Press  to increase the volume and  to 
decrease  the volume.
Mute
Press
 button to switch the mute function On/
Off. 1 Press the MENU button to display the screen 
   menu.  Press 
 button to select the Setting 
   menu icon. Press OK to enter the submenu 
   entry.
2 Press 
 button to select Volume and then 
    press OK button.
3 Press 
 button to select Volume or Mute to  
   adjust.
PC adjust
Display
Color adjust...

26
Remote control operation
INPUT 
Press INPUT button on the remote control to 
select the input source.
FREEZE 
Press FREEZE button to freeze the picture on the 
screen. To cancel the freeze function, press the 
FREEZE button again or press any other button.MUTE
Press MUTE button on the remote control to turn 
off the volume. Press MUTE button again or any 
other buttons to cancel mute function.
VOLUME +/-  
Press image VOLUME +/- button on the remote 
control to increase or decrease the volume.
INPUT...

27
D.ZOOM+ 
Press D.ZOOM+ button, the on-screen menu 
will disappear, while the information on digital 
zoom + appears. You can press Select to zoom 
in the image size, and press   ▲▼◄►to move 
the image horizontally and vertically.
The moving is effective only when the image is 
larger than the size of the screen.
D.ZOOM-  
Press D.ZOOM- button, the on-screen menu 
will disappear, while the information on digital 
zoom - appears. Press OK button to zoom in 
the image size.
To exit the “digital zoom...

28
Input select
Direct Operation
Press HDMI, VGA, COMOPNENT, S-VIDEO 
or VIDEO button to select HDMI, VGA IN, 
Component, S-video or Video as input source.When input source is from 
computer connected to VGA 
IN 1 terminal with VGA cable,  
please select VGA IN 1.When input source is from 
computer connected to VGA IN 
2/VGA OUT terminal with VGA 
cable,  please select VGA IN  2.
 Note:
  -  When the Input Search function is set to On in the Auto setup function, the input signal will be 
    searched...

29
PC Adjust
Auto PC adj.
Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal and 
Vertical to conform to your computer.
Store Menu operation
The system parameters adjusted in the Auto PC 
adj. can be stored in the projector.
√ Note:
  - Total dots and horizontal & vertical positions of some computers cannot b\
e fully adjusted with this 
     Auto PC adj. function. When the image is not provided properly with this function, manual adjustments 
    are...