Boxlight Projector P7 WX32N User Manual

							40
Setting
 High land
Enable to control the fan through the Setting 
menu.
You can select the running speed of the fan 
according to the altitude of the location where 
the projector is installed.
Off......Normal speed. Set it Off if the projector 
           is operated at a lower altitude.
On......Faster than Off. Set it On if the projector 
           is operated at a higher altitude because  
           fans will produce weaker effects.
Note:
  Plese set High land "On" when operating the   
  projector higher than 2000 meters.
 Lamp control
Change the brightness of the screen.
      Normal....Normal brightness.
      Eco..........Lower brightness, reducing 
                      power consumption and 
                      extending the lamp life.
 Cooling fast
This function provides the following options in 
the cooling fans’ operation after turning off the 
projector.
Normal... Normal cooling speed.
60 sec ... Faster and lounder than Normal, 
                cooling time is shorter.
0 sec ..... Enable you directly unplug the AC 
                power cord after turning off the 
                projector, no need waiting for cooling. High land
Lamp control Cooling fast
PC adjustDisplay
Color adjust
Setting
Expand
Info.
Adjust  Select   Back
On start                  Off
Standby mode              Normal
High land                 Off
Lamp control
Cooling fast              Normal
Closed caption            Off
Key lock   
Iris                      Off
Terminal                  VGA OUT
Sound                     
                    
Off
On
PC adjust
Display
Color adjust
Setting
Expand
Info.
Adjust  Select   Back
On start                  Off
Standby mode              Normal
High land                 Off
Lamp control
Cooling fast              Normal
Closed caption            Off
Key lock   
Iris                      Off
Terminal                  VGA OUT
Sound                     
                      

PC adjust
Display
Color adjust
Setting
Expand
Info.
Adjust  Select   Back
On start                  Off
Standby mode              Normal
High land                 Off
Lamp control
Cooling fast              Normal
Closed caption            Off
Key lock   
Iris                      Off
Terminal                  VGA OUT
Sound                     
                     
Normal
60 sec
0 sec  
						

							41
Setting
 Key lock
This function allows you to use the Key lock 
and PIN code lock function to set the security 
for the projector operation.
Select "Key lock" and press OK button, then 
press  button to select the item you desire
. 
         Off ......................Unlock.
         Projector ........... Lock the operation 
                                           of the.top control.
                                           To unlock, use the 
                                           remote control.          
Remote Control ....Lock the operation 
                                              of the remote control. 
                                              To unlock, use the 
                                              top control.
    
                                                
If the top control accidentally becomes locked 
and you do not have the remote control 
nearby or there is something wrong with your 
remote control, contact the dealer where you 
purchased the projector or the service center.
Key lock
PC adjust
Display
Color adjust
Setting
Expand
Info.
Adjust  Select   Back
On start                  Off
Standby mode              Normal
High land                 Off
Lamp control
Cooling fast              Normal
Closed caption            Off
Key lock   
Iris                      Off
Terminal                  Monitor out
Sound                     
                      

 Closed Caption
Allows the subtitle to be displayed for the 
audio contents or other information. If the input 
source contains closed caption, you can enable 
this function and change the channel. Press 
 to select OFF, CC1, CC2, CC3 or CC4.
 Note:
   - The icon of Closed Caption is displayed in 
     grey when it is disable.
   - Closed caption is disable when screen menu    
     or Timer displayed on screen. Closed Caption
PC adjust
Display
Color adjust
Setting
Expand
Info.
Adjust  Select   Back
On start                  Off
Standby mode              Normal
High land                 Off
Lamp control
Cooling fast              Normal
Closed caption            Off
Key lock   
Iris                      Off
Terminal                  Monitor out
Sound                      
Off
CC1
CC2
CC3
CC4  
						

							42
 Iris
This function is used to increase the contrast of 
the image.
  On....Enable Iris function, increase the 
           contrast of the image.
  Off....Disable Iris function.
 Terminal
The VGA IN 2/VGA OUT terminal can be used 
as computer input or monitor output.Press ▲ 
to select input or output.
   VGA IN 2  ....... VGA 2 input
   VGA OUT..........Monitor out
 Sound
This item is used to adjust the volume.
Sound.. .Press 
 button to increase the 
             volume, press  
  button to 
             decresce the volume. 
Mute.....Press OK button to switch mute 
             function.(On/Off) SoundIris
TerminalPC adjust Display
Color adjust
Setting
Expand
Info.
Move Next Exit
On Start                    Off
Standby Mode                Normal
High Land                   Off
Lamp Control
Cooling Fast                Normal
Closed caption              Off
Key Lock   
Iris                        Off
Terminal                    VGA OUT
Sound                       
    Volume   12
    Mute     Off
PC adjust
Display
Color adjust
Setting
Expand
Info.
Adjust  Select   Back
On start                  Off
Standby mode              Normal
High land                 Off
Lamp control
Cooling fast              Normal
Closed caption            Off
Key lock   
Iris                      Off
Terminal                  Monitor out
Sound                     
                      
Off
On
PC adjust
Display
Color adjust
Setting
Expand
Info.
Adjust  Select   Back
On start                  Off
Standby mode              Normal
High land                 Off
Lamp control
Cooling fast              Normal
Closed caption            Off
Key lock   
Iris                      Off
Terminal                  Monitor out
Sound                      
VGA IN 2
VGA OUT
Setting  
						

							43
Expand
The projector has Expand menu that allows you to set the other various expand functions 
described as follows.Expand menu
Auto setup
PC adjust
Display
Color adjust
Setting
Expand
Info.
Move Next Exit
Language
Auto setup
Logo
Security
Power management
Filter counter
Test pattern
Network
Factory default
PC adjust
Display
Color adjust
Setting
Expand
Info.
Move Next Back
                Auto setup
Input search               On
Auto PC adj.               On
Auto keystone              Auto
 Language
Press
  button to select the language for 
screen manual.
This projector provides lanuages below:
English, Persian, Russian, Finnish, Dutch, 
Italian, Portuguese, French, German, 
Thai, Vietnamese, Japanese, Korean, 
Spanish,  Indonesian, Turkish, Arabic, 
Afrikaans,Traditional Chinese,Simplified 
Chinese.
 Auto setup
Press AUTO button on the remote control 
to execute Input search and Auto PC adj. 
functions.
Input search
Allows you to automatically detect input 
signals. It stops when a signal is found. 
Press   button  to select an option 
below: 
Off........Disabled.
On........Enabled. This function is used to 
             detect input signals automatically 
             and stops when finding a signal.
Auto PC adj
On........Press the AUTO button on the 
             remote control to enable Auto PC 
             adj. function automatically. 
Off........Cancel Auto PC adj. function.
Auto keystone
Off.........Disable auto keystone function.
Manual..Press the AUTO button on the
              top control or remote control to  
                 enable Auto keystone function.
Auto......Correct keystone distortion 
                 according to the slope of the 
              projector. 
Note:
  - Only the last selected input source can be 
    detected.
  - If the INPUT button on the top control or on the   
    remote control is pressed during Input search is in  
    progress, Input search will stop and go back to the 
    previous  input signal.
  - Input Search and Auto PC Adj. cannot  be set Off 
    at the same time.
  - Fine sync., Total dots, Horizontal and Vertical 
    position of some computers cannot be fully 
    adjusted with the Auto PC Adj. function. 
   When the image is not  provided properly with this 
   operation, manual adjustments are required.
1 Press MENU button on the remote control to  
   display screen menu. Press  
  button to 
   select Expand ,then press OK button.
2 Press   button to select  the item you 
    want to set,  press OK button.
3 Press   button to adjust the item, then 
    press OK button.  
						

							44
Expand
 Logo
This function allows you to customize the screen logo with Logo select, Capture, Logo PIN code 
lock and Logo PIN code change functions.
Logo SelectThis function decides on the starting-up display 
from among following options.
  Default .... Show the factory-set logo.
  User..........Show the image captured by user.
  Off ........... Show the countdown display only.
Capture
You can capture a projected image as start 
logo or interval of presentation.
Select Capture and press OK button.
Confirmation dialog box appears, select 
"Yes" to start capturing. 
You can set Logo Select as "User" after 
capturing, then captured image will appear on 
screen next time you start the projector. 
Logo PIN code Lock
This function prevents an unauthorized person from changing the screen l\
ogo.
  Off ...... .....The screen logo can be changed freely from the Logo menu.
  On ...... .....The screen logo cannot be changed without a Logo PIN co\
de.
If you want to change the Logo PIN code lock setting, press OK button and the Logo PIN code dialog\
 
box appears. Enter a Logo PIN code by following the steps below.
Enter PIN code 
Press   button to select a number, and then press OK button to enter this number, 
automatically move the cursor to next box. If you fixed an incorrect number, press MENU button 
to reset it again.
Repeat this step to complete entering a three-digit number.
After entering the three-digit number, automatically move the cursor to “Set”, and press OK 
button, then you can start to operate the projector.
If you entered an incorrect PIN code, the “PIN code” and the number (***) turn red, it will be 
reset automatically within one second. Enter the correct PIN code all ov\
er again.
Logo PIN code change
Logo PIN code can be changed to your desired three-digit number. Press OK button to select Logo 
PIN code change. Logo Pin code dialog box appears, press ▲▼ button to enter the correct code. The 
New  Logo  PIN  code  input  dialog  box  appears.  Set  a  new  Logo  PIN  code,  confirmation  box  appears, 
select Yes to set the new Logo Pin code.
Be sure to note the new Logo PIN code and keep it on hand. If you lost the number, you could no 
longer change the Logo PIN code setting.
Logo
PC adjust
Display
Color adjust
Setting
Expand
Info.
Move Next Back
                 Logo
Logo Select                Default
Capture
Logo PIN code lock         Off
Logo PIN code change
When you have changed the logo pin code, write down the new pin code in \
column of the logo pin 
code no. memo on page 65, and keep it securely. Should the logo pin code be lost or forgotten, the 
logo pin code setting can no longer be changed.
 Caution:  
						

							45
This function allows you to use the PIN code 
lock and PIN code change functions to set the 
security for the projector operation.
PIN code lock
This function prevents the projector from 
being operated by unauthorized persons 
and provides the following setting options for 
security.
  Off ............Unlocked.
  On ........... Enter the PIN code every time 
                    turning on the projector.If you 
                    want to change PIN code lock 
                    setting or PIN code,you must 
                    enter the PIN code. The orignal 
                    PIN code is "111".
       
If you want to change the PIN code lock 
setting, press OK button, then PIN code dialog 
box appears.
Enter PIN code
Press   button to select a number,  and 
then press OK button to enter this number, 
automatically move the cursor to next box.  If 
you fixed an incorrect number, press MENU 
button to reset it again.
Repeat this step to complete entering a three-
digit number.
After entering the three-digit number, move the 
cursor to “Set”, and press OK button, then you 
can start to operate the projector.
If you entered an incorrect PIN code, the “PIN 
code” and the number (***) turn red, it will be 
reset automatically within one second. Enter 
the correct PIN code all over again.
Change Logo PIN code lock setting
Press   button to select On or Off, then 
press OK button.
PIN code changeThe PIN code can be changed to your desired 
three-digit number. Press   
button to 
select PIN code change. Pin code dialog box 
appears, Press   
button to enter the correct 
code. The New PIN code input dialog box 
appears. Set a new PIN code.When you have changed the logo pin code, 
write down the new pin code in column of the 
logo pin code no. memo on Page 65, and keep 
it securely. Should the logo pin code be lost 
or forgotten, the logo pin code setting can no 
longer be changed.
Security
PC adjust
Display
Color adjust
Setting
Expand
Info.
Move Next Back
               Security
PIN code lock              Off
PIN code change
Expand
Security
  Caution:  
						

							46
Expand
Note:
  Factory default: "Ready: 5 min".
 Filter counter
This function is used to set a frequency for filter 
cleaning.
When the projector reached a specified time 
between cleanings, a Filter warning icon 
appears on the screen, notifying the cleaning 
is necessary. After cleaning the filter, be sure 
to select RESET and set the timer. The Filter 
warning icon will not turn off until the filter 
counter is reset.
  Filter counter...........The time that filter used.  
  Timer.......................Frequency for filter 
                                  cleaning.
  Filter counter reset..Reset the filter counter.
Power management
Filter counter
PC adjust
Display
Color adjust
Setting
Expand
Info.
Adjust Select Back
            Power management
  Ready
  Shut down
  Off
  Timer                    5 Min
  Ready countdown          0 Min
PC adjust
Display
Color adjust
Setting
Expand
Info.
Move Next Back
            Filter counter
Filter counter               0 H
Timer                      400 H
Filter counter reset
Power management
    No signal
  01 : 20
Time left before Lamp is off.
 Power management
For reducing power consumption as well as maintaining the lamp life, the Power management 
function turns off the projection lamp when the projector is not operated for a certain period. Select 
one of the following options:
Ready .................. When the lamp has been fully cooled down, the P\
OWER indicator changes to 
                               green blinking.In this condition, the pro\
jection lamp will be turned on if the input 
                               signal is reconnected or any button on th\
e top control or remote control is 
                               pressed.
Shut down ............ When the lamp has been fully cooled down, the pow\
er will be turned off.
Off ........................ Power management function is off.
Timer .................... If the input signal is interrupted and no butt\
on is pressed for more than 30 
                               seconds, the timer display with No signal\
 appears. It starts the countdown until 
                               the lamp is turned off. Press 
 button to set the Timer(1~30min.)
Ready  countdown..Set  the  time  that  ready  status  transfers  to  standby  status  automatically.(0-                               
                               30min.0 Min: not transfer automatically)\
                               In ready status, press POWER button to sw\
icth to standby status, and press 
                               any other button to turn on the projector\
.  
						

							47
Expand
 Test Pattern
This function is used to set the internal test 
signal:Gray scale 1,Gray scale 2,Gray scale 
3,Gray scale 4, Color bar, Red, Green, Blue, 
Cross hatch,White,Black and Gray. Test PatternPC adjust
Display
Color adjust
Setting
Expand
Info.
Move Next Back
               Test Pattern
  Off
  Gray scale 1
  Gray scale 2
  Gray scale 3
  Gray scale 4
  Color bar
  Red
  Green
  Blue
  Cross hatch
 Network
Function : PC controls projector via LAN.
Preparation:
1. Equipments: PC, projector, cables
2. Connection procedures:
    Connect the projector to routers or switches of the LAN by direct or\
 cross cable. If it fails to  
    connect PC and projector by parallel cable, please switch to cross c\
able as suggested.
3. After the computer is booted and the projector is plugged in, indicator \
lights of LAN interface 
    on will flash continuously.
Operation procedures:
   1  Turn on the projector.
   2  Obtain network address. DHCP set is displayed as On and obtain network address 
       automatically.( If familiar with network, you can set DHCP as Off and obtain network 
       address manually.)
  3   Enter network settings menu.
        (1) Press MENU button on the remote control 
            to display screen menu. Press 
 
            button to select Expand, then press 
            OK button.   
    
        (2) Press   button to select Network, 
            and then press OK button to enter the 
            newtork menu.
PC adjust
Display
Color adjust
Setting
Expand
Info.
Move Next Exit
                 Network
  Network setting
  Network information:
      MAC address:      000000000000
      IP address:       192.168.001.023  
(Some model doesn't support this function.)  
						

							48
Expand
 Factory default
This function returns all setting values except 
for the User  logo, PIN code lock, Logo PIN 
code lock, Lamp counter and Filter counter to 
the factory default settings.
Network setting
DHCP                    Off
 SetCancel
IP address              0    0     0     0 
Subnet                  0    0     0     0  
Gateway                 0    0     0     0 
DNS                     0    0     0     0 
Move                                Select                               Back
Network setting
DHCP                     On
 SetCancel
IP address              
Subnet                  
Gateway                 
DNS                   
Adjust                           Select                               Back
             (3) When DHCP is set On, IP address,  
                  Subnet, Gateway and DNS will be  
                  abtained automatically, press OK at 
                  "Set" to confirm the parameters.
                  When DHCP is set Off, press OK 
                  button to enter IP address, then 
                  press  button to enter Subnet, 
                  Gateway and DNS respectively, 
                  press OK at "Set" to confirm the 
                  parameters.  
						

							49
Infomation
The information menu is used to detect signal of projected image and run\
ning state.
Menu operation
Press MENU button on the remote control to 
display the screen menu. Press   to select  
Info., then press OK button, the information 
menu will appear as the right picture.
The information below will display in 
information menu. Info. menu
PC adjust
Display
Color adjust
Setting
Expand
Info.
Move Next Exit
Input                    VGA IN 1
                         1024x768@60
H-sync freq.             48.3   KHz
V-sync freq.             59.9   Hz
Lamp status
Lamp counter             16 H
Power management         Ready
                         5 Min
Image Mode               Normal                 
Input
The selected input source is displayed.
H-sync freq .
The horizontal frequency of the input signal is 
displayed in KHz or - - - -KHz when no signal.
V-sync freq .
The vertical frequency of the input signal is 
displayed in Hz or - - - - Hz when no signal. 
Lamp status
Display the lamp mode you select. Lamp counter
Display the time that lamp used.
Power management
Display the power management setting. 
Image mode
Display the selected image mode.