Boxlight Projector P7 WX32N User Manual

							30
PC Adjust
Some computers employ special signal formats which may not be tuned by M\
ulti-scan system of this 
projector. Manual PC Adjustment is provided for you to precisely adjust several parameters to match 
those signal formats. The projector has five independent memory areas to store those parameter\
s 
manually adjusted, which allows you to recall the setting for a specific computer.
1 Press MENU button on  the  remote control 
   to display screen menu. Press 
 button 
   to select PC adjust,then press OK button.
2 Press   button to select  the item you     
   want to adjust ,then    button to adjust 
  the data.   Manual PC adj. menu
PC adjust
Display
Color adjust
Setting
Expand
Info.
Move Next Exit
Auto PC adj.             
Fine sync                             16
Total dots                          1056
Horizontal                           216
Vertical                              27
Display area H                       800
Display area V                       600
Reset 
Mode free
Store
Manual PC adj.
Fine syncPress buttons to adjust the value, eliminating 
a flicker from the image displayed (from 0 to 31).
Total dotsPress  buttons to adjust the number of total 
dots in one horizontal period to match your PC 
image.
Horizontal
Press  to adjust the horizontal picture 
position.
Vertical
Press  to adjust the vertical picture position.
Display area H
Press to adjust the horizontal area displayed 
by the projector.
Display area V
Press to adjust the vertical area displayed by 
the projector.
ResetTo reset the adjusted data, select Reset and press 
OK . A confirmation box appears and then select 
Yes. All adjustments will return to their previous 
figures.
Mode freeTo clear the adjusted data, select Mode free and 
then press  or OK .Move  or OK to highlight 
the Mode you want to clear and then press OK.
StoreTo store the adjusted data, select  Store and then 
press  or OK. Move the red arrow indicator to 
one of the Mode 1 to 5 in which you want to store, 
and then press OK. √ Note:
   If you select 480i, 576i, 480p, 576p, 720p, 1035i   
  or 1080i from the system menu, the functions of 
  both horizontal image and vertical image will be    
  disabled.  
						

							31
Screen Size
Display
Following items can be set in Display menu:Screen Size, Keystone, Project Mode, Menu Position, 
Background Display and System.Display menu
Screen Size
PC adjustDisplay
Color adjust
Setting
Expand
Info.
Move Next Exit
Screen Size                  Normal
Keystone                     Stored
Project Mode                 Front
Menu Position                Center
Background Display          Blue
System                       1024x768@60
PC adjust
Display
Color adjust
Setting
Expand
Info.
Adjust  Select   Back
Screen Size                  Normal
Keystone                     Stored
Project Mode                  Front
Menu Position                Center
Background Display          Blue
System                       1024x768@60Normal
Wide
Custom
The screen size can be reset to the value as 
you desire.
Normal
To project images in the same aspect ratio with 
the input signals.
Wide
Provide an image with an aspect ratio of 16:9 
by expanding the image width uniformly. 1 Press MENU button on the remote control to  
   display screen menu. Press
 
  button to 
   select Display,then press OK button.
2 Press  button to select Screen Size,     
   press OK button.
3 Press button to select the size you    
    desire,and then press OK button.
 Note:
  To abtain perfect image quality, please set the display resolution as XGA(1024x768) or 
    WXGA(1280x800).
Custom
Adjust the proportion and position of the screen 
manually.
Press OK button at Custom, Custom menu 
appears on the screen.Press 
 
button to 
adjust your required item.
H/V scale: Adjust the horizontal/vertical screen 
scale.
H&V: When set to “On”, the aspect ratio is 
fixed. The Scale V appears dimmed and 
becomes unavailable. Adjust Scale H, and 
then the screen scale is automatically modified 
based on the aspect ratio.
H/V position: Adjust the horizontal/vertical 
screen position.
Common: Save the adjusted scale to all the 
inputs. Press OK at Common to display a 
confirmation box. To save the scale, press OK. 
When Custom is selected, the saved scale is 
used.
Reset: Reset all the adjusted values. Press OK 
at  Reset  to  display  a  confirmation  box.  To  set, 
press OK at “Yes”.  
						

							32
Display
Keystone menuProject mode menu
This function is used to store or reset the 
keystone correction when the AC power cord is 
unplugged. 
1 Press  MENU button on the remote control to  
   display screen menu. Press  
  button to 
   select Display,then press OK button.
2 Press  button to select Keystone, press 
   OK button.
3 Press  button to select the item you want 
   to set, press OK button.
PC adjust
Display
Color adjust
Setting
Expand
Info.
Adjust  Select   Back
Screen Size                  Normal
Keystone                     Stored
Project Mode                  Front
Menu Position                Upper left
Background Display          Blue
System                       1024x768@60
Reset 
Stored
Adjust
PC adjust
Display
Color adjust
Setting
Expand
Info.
Adjust  Select   Back
Screen Size                  Normal
Keystone                     Stored
Project Mode                  Front
Menu Position                Upper left
Background Display          Blue
System                       1024x768@60
Front
Rear
Ceiling/Front
Ceiling/Rear
Reset ...Reset the keystone correction when 
             the AC power cord is unplugged.
Store ...Store the keystone correction even 
             when the AC power cord is unplugged.
Adjust ..Press OK for keystone correction. 
             Keystone correction menu appears on 
             the screen. Press 
 to correct 
             keystone distortion.
This function is used to set the project mode.
1 Press MENU button on the remote control to  
   display screen menu. Press  
  button to 
   select Display,then press OK button.
2 Press  button to select Project Mode, 
   press OK button.
3 Press  button to select the item you want 
   to set, press OK button.
Front.............. ..Project to front screen when  
                        projector is front standing.             
Rear................Project  to  rear  screen  when                     
                        projector is front standing.
Ceiling/Front....Project to front screen when  
                        projector is in ceiling state.   
Ceiling/Rear....Project  to  rear  screen  when                     
                        projector is in ceiling state.
Keystone
Project Mode  
						

							33
Display
Menu Position
Menu position 
PC adjust
Display
Color adjust
Setting
Expand
Info.
Adjust  Select   Back
Screen Size                  Normal
Keystone                     Stored
Project Mode                  Front
Menu Position                Upper left
Background Display          Blue
System                       1024x768@60

Upper left
Upper right
Center
Lower left
Lower right
You can use this function to change the 
position of screen menu. 
1 Press MENU button on the remote control to  
   display screen menu. Press  
  button to 
   select Display,then press OK button.
2 Press  button to select Menu Position, 
   press OK button.
3 Press  button to select the item you want 
   to set, press OK button.
Upper left....Menu locates on upper left of 
                    the screen.
Upper right..Menu locates on upper right of 
                    the screen.
Center.........Menu locates at the center of 
                    the screen.
Lower left....Menu locates on lower left of 
                    the screen.
Lower right..Menu locates on lower right of 
                    the screen.
Background Display
This function is used to select the screen 
background of the projector when there is no 
signal detected.
1 Press MENU button on the remote control to  
   display screen menu. Press  
  button to 
   select Display,then press OK button.
2 Press  button to select Background  
   Display, press OK button.
3 Press  button to select the item you want 
   to set, press OK button. Background display
PC adjust
Display
Color adjust
Setting
Expand
Info.
Adjust  Select   Back
Screen Size                  Normal
Keystone                     Stored
Project Mode                 Front
Menu Position                Center
Background Display          Blue
System                       1024x768@60
   Black
   Blue
Black....Select black background.
Blue......Select blue background.  
						

							34
System
Computer system select
The projector automatically tunes to various types of computers with its function of Multi-scan 
system and Auto PC Adjustment. If a computer is selected as a signal source, the projector 
automatically detects the signal format and tunes to project proper images without any additional 
setting.
PC adjustDisplay
Color adjust
Setting
Expand
Info.
Move Next Exit
Screen Size                  Normal
Keystone                     Stored
Project Mode                 Front
Menu Position                Center
Background Display          Blue
System                       1024x768@60
Note:
  When HDMI is selected, System menu for 
  computer is disable.
PC adjust
Display
Color adjust
Setting
Expand
Info.
Adjust  Select   Back
   System      RGB(PC1)    
1024x768@60
1366x768@60
----
----
----
System for computer signal System
Display
One of the following messages may appear 
when:
Auto
----- When the projector cannot recognize 
the connected signal conforming to 
the provided computer system, Auto 
is displayed on the System menu 
box and the Auto PC Adj. function 
works to display proper images. If 
the image is not projected properly, 
a manual adjustment is required.
There is no signal input from 
computer. Check the connection 
between your computer and 
projector.
Select computer system manually
The system can also be selected manually.
1 Press MENU button on the remote control to      
  display the screen menu.Press 
 button to 
  select the Display icon, and press OK button.
2 Press 
 button to select System and press 
   OK button.
3 Press 
 button to select your required 
   system, and then press the OK button.  
						

							35
PC adjustDisplay
Color adjust
Setting
Expand
Info.
Adjust  Select   Back
   System      Component  
Auto
1080i
1035i
720p
576p
480p
576i
480i
PC adjust
Display
Color adjust
Setting
Expand
Info.
Adjust  Select   Back
   System      Video   
Auto
PAL
SECAM
NTSC
NTSC4.43
PAL-M
PAL-N
Display
System for Video or S-video signal
System for Component signal
Video or S-video
Auto
The projector automatically detects an 
incoming video system,and adjusts itself to 
optimize its performance. When Video System 
is PAL-M or PAL-N, select the system manually.
PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N
If the projector cannot reproduce proper video 
images, select a specific broadcast signal 
format from PAL, SECAM, NTSC,NTSC 4.43, 
PAL-M and PAL-N.
Component
Auto
The projector automatically detects an input 
video system,and adjusts itself to optimize its 
performance.
Component video signal format
If the projector cannot reproduce proper video 
images, select a specific broadcast signal 
format from 480i, 576i, 480p, 576p, 720p, 
1035i and 1080i.  
						

							36
Color adjust menu is used to set the image mode and adjust the image. Menu operation Image mode (Computer)
Image mode (Video, S-video, Component)
PC adjust
Display
Color adjust
Setting
Expand
Info.
Adjust  Select   Back
Image Mode               
Contrast                     32
Brightness                       32
Color temp.                       自然
Red                         32
Green                         32
Blue                      32
Sharpness                 8Normal
Natural
Cinema
Blackboard(Green)Colorboard Red
User Image
PC adjust
Display
Color adjust
Setting
Expand
Info.
Adjust  Select   Back
Image Mode                   标准
Contrast                     32
Brightness                       32
Color                        自然
Tint
Red                         32
Green                     32
Blue                      32
Sharpness                 8
Progressive              L1Normal
Natural
Cinema
Blackboard(Green)Colorboard Red
User Image
Color adjust
1 Press MENU button on the remote control to  
   display screen menu. Press  
  button to 
   select Color adjust,then press OK button.
2 Press  button to select Image Mode, 
   press OK button.
3 Press  button to select the item you want 
   to set, press OK button.
Cinema
For watching movies with multiple gray scale 
levels.
Blackboard (Green)
For viewing the image projected on a 
blackboard (green) by enhancing the image 
quality. This is mainly effective on a green 
colored board instead of a black colored board.
Colorboard
For images projected onto the red, blue, yellow, 
or green wallpaper.
User Image
Image quality preset by the user in the Image 
adjustment menu.Normal
Image quality preset by the system on the 
projector.
Natural
For viewing images in a bright room.
Image Mode  
						

							37
Color adjust
Color adjust(Computer)
PC adjustDisplay
Color adjust
Setting
Expand
Info.
Move Next Exit
Image Mode                     Normal
Contrast                       32
Brightness                     32
Color temp.                    Mid
Red                            32
Green                          32
Blue                           32
Sharpness                      8
Color adjust(Computer)
Contrast
Press 
 to decrease the contrast and 
 to 
increase it.
Brightness
Press   to decrease the brightness and 
 to 
increase it.
Color temp.
Press   to select your desired color 
temperature.( Low, Mid and High )
Red(White balance)
Press   to lighten the red tone and 
 t o 
deepen it.
Green(White balance)
Press   to lighten the green tone and 
 to 
deepen it.
Blue(White balance)
Press   to lighten the blue tone and 
 to 
deepen it.
Sharpness
Press   to decrease the sharpness of an 
image and   to increase it.
1 Press MENU button on the remote control to  
   display screen menu. Press
 
  button to 
   select Color adjust,then press OK button.
2 Press  button to select  the item you want 
   to set,  press OK button.
3 Press  button to adjust the data.  
						

							38
PC adjustDisplay
Color adjust
Setting
Expand
Info.
Move Next Exit
Image Mode                     Normal
Contrast                       32
Brightness                     32
Color                          32
Tint                           32
Red                            32
Green                          32
Blue                           32
Sharpness                      8
Progressive                    L1
Color adjust
Color adjust(Video,S-video, Component)
Color adjust
(Vdieo,S-video,Component)
Contrast
Press 
 to decrease the contrast and 
 to 
increase it.
Brightness
Press   to decrease the brightness and 
 to 
increase it.
Red(White balance)
Press   to lighten the red tone and 
 t o 
deepen it.
Green(White balance)
Press   to lighten the green tone and 
 to 
deepen it.
Blue(White balance)
Press   to lighten the blue tone and 
 to 
deepen it.
Sharpness
Press   to decrease the sharpness of an 
image and   to increase it.
1 Press MENU button on the remote control to  
   display screen menu. Press
 
  button to 
   select Color adjust, then press OK button.
2 Press  button to select  the item you want 
   to set,  press OK button.
3 Press  button to adjust the data.
Color
Press   to decrease the chorma and 
 to 
increase it.
Tint
Press   
to select the appropriate tone for the 
image.
Progressive
An interlaced video signal can be displayed 
in a progressive picture. Select one of the 
following options:
Off......Disabled.
L1.......For an active picture.
L2.......For a still picture.
Film....For watching a film. With this function, 
           the projector reproduces pictures faithful 
           to the original film quality,reducing 
           distortion.  
						

							39
The projector has Setting menu that allows you to set the other various functions described as 
follows.Setting menu
On start
Standby mode
Setting
PC adjust
Display
Color adjust
Setting
Expand
Info.
Move Next Exit
On start                  Off
Standby mode              Normal
High land                 Off
Lamp control
Cooling fast              Normal
Closed caption            Off
Key lock   
Iris                      Off
Terminal                  VGA OUT
Sound                                           
PC adjust
Display
Color adjust
Setting
Expand
Info.
Adjust  Select   Back
On start                  Off
Standby mode              Normal
High land                 Off
Lamp control
Cooling fast              Normal
Closed caption            Off
Key lock   
Iris                      Off
Terminal                  VGA OUT
Sound                     Off
On
PC adjust
Display
Color adjust
Setting
Expand
Info.
Adjust  Select   Back
On start                  Off
Standby mode              Normal
High land                 Off
Lamp control
Cooling fast              Normal
Closed caption            Off
Key lock   
Iris                      Off
Terminal                  VGA OUT
Sound                     
                   
Eco
Normal
 On start
Enable the projector to be turned on 
automatically just by connecting the AC power 
cord to an outlet when this function is set to 
On.
 Standby mode
Press
 button to select the item below:
Eco..........In this state, network function, 
                RS-232C and VGA OUT are 
                disable after turning off the projetcor.
Normal  ...Supply  power  to  the  projector                 
                even after turning off the projector.
                You can turn on or turn off the 
                projector via series port.  1 Press MENU button on the remote control to  
   display screen menu. Press
 
  button to 
   select Setting ,then press OK button.
2 Press  button to select  the item you want 
   to set,  press OK button.
3 Press  button to adjust the item, then 
   press OK button.