Boxlight Projector P12 User Manual

							Replace the Lamp
This projector will automatically detect the service life of its lamp. 
When service life of the lamp is about to expire, a warning message 
will be displayed.When you see this message, please contact the local dealer or 
service center to replace the lamp as soon as possible. Please be 
sure that the projector has been cooled down for at least 30 minutes 
before replacement of the lamp.
  Warning: If the projector is installed on the ceiling, please 
handle carefully when you open the lamp cover. If the 
projector is installed on the ceiling, we suggest that you 
wear safety glasses when replacing the lamp.  “Always 
handle carefully to prevent any loose component from 
falling off the projector.”
  Warning: The lamp Component may be hot! Replace the  lamp after it is cooled down!
  Warning: To reduce the risk of personal injury, please prevent the lamp module from falling down and avoid 
touching the lamp. If the lamp falls down, it may be broken 
up, which may cause injury.  
Appendices  
						

							Appendices
The screws on
the latern and the
lamp shall not be
removed.
 If the lamp cover is
not reinstalled on
the projector yet,
the projector cannot
be switched on.
 Do not touch the
glass area of the
lamp. Oil on hands
may cause the lamp
to break up. If you
accidentally touch
the lamp module,
please clean it with
dry cloth. 1.
Press “
 ” button to power the projector  off.
2. Cool down the projector for at least 30 minutes.
3. Pull off the power cable.
4.
 Press the release button and pull up the lamp cover of the main componen\
ts.   1

5. Lift up and remove the lamp cover. 2
6. Remove the 2 screws on the lamp  module. 3
7.
 Pull up the Lamp Handle 4 and pull the lamp module  out carefully and slowly.   5

Follow the aforesaid steps in the reverse order to install the lamp modu\
le.
8. After the lamp module is replaced, switch on the projector and reset the lamp
hour counter. 
(i) Press  to open the “Service” menu.
(ii) Select “Reset Lamp Hours”.
1
2
3
4
5 
						

							Appendices
Installing and Cleaning the Optional 
Dust Filter
operation, or more often if you are using the projector in a 
dusty environment. 
When the warning message appears on the screen, do the 
The optional dust
used in dusty
environments.
 
installed, a proper
maintenance will
prevent overheat-
ing and projector
malfunction.
Air Filter Cleaning Procedure:
1. Turn off the projector.
2. Disconnect the power cord.
3.
illustration. 1
4.
2
5.replaced.
1
1
2
2 
						

							Compatibility Modes
 VGA Analog
a. PC SignalModes Resolution V.Frequency
[Hz] H.Frequency
[KHz]
VGA 640x480 60
31.5
640x480 67 35
640x480 72 37.9
640x480 75 37.5
640x480 85 43.3
IBM 720x400 70 31.5
SVGA 800x600 56
35.1
800x600 60 37.9
800x600 72 48.1
800x600 75 46.9
800x600 85 53.7
800x600 120 77.4
Apple, Mac II 832x624 75 49.1
XGA 1024x768 60
48.4
1024x768 70 56.5
1024x768 75 60
1024x768 85 68.7
1024x768 120 99
Apple, Mac II 1152x870 75 68.7
SXGA 1280x1024 60
64
1280x1024 72 77
1280x1024 75 80
QuadVGA 1280x960 60
60
1280x960 75 75.2
SXGA+ 1400x1050 60 65.3
UXGA 1600x1200 60 75  
Appendices  
						

							b. Extended Wide timingModes Resolution V.Frequency
[Hz] H.Frequency
[KHz]
WXGA 1280x720 60
44.8
1280x720 120 92.9
1280x800 60 49.6
1366x768 60 47.7
1440x900 60 59.9
WSXGA+ 1680x1050 60 65.3
c. Component Signal
Modes Resolution V.Frequency
[Hz] H.Frequency
[KHz]
480i 720x480 
(1440x480) 59.94(29.97) 15.7
576i 720x576 
(1440x576) 50(25)
15.6
480p 720x480 59.94 31.5
576p 720x576 50 31.3
720p 1280x720 60 45
720p 1280x720 50 37.5
1080i 1920x1080 60(30) 33.8
1080i 1920x1080 50(25) 28.1
1080p 1920x1080 23.98/2427
1080p 1920x1080 60 67.5
1080p 1920x1080 50 56.3
 HDMI Digital
a. PC Signal
Modes Resolution V.Frequency
[Hz] H.Frequency
[KHz]
VGA 640x480 60
31.5
640x480 67 35
640x480 72 37.9
640x480 75 37.5
640x480 85 43.3  
Appendices  
						

							IBM 720x400 7031.5
SVGA 800x600 56
35.1
800x600 60 37.9
800x600 72 48.1
800x600 75 46.9
800x600 85 53.7
800x600 120 77.4
Apple, Mac II 832x624 75 49.1
XGA 1024x768 60
48.4
1024x768 70 56.5
1024x768 75 60
1024x768 85 68.7
1024x768 120 99
Apple, Mac II 1152x870 75 68.7
SXGA 1280x1024 60
64
1280x1024 72 77
1280x1024 75 80
QuadVGA 1280x960 60
60
1280x960 75 75.2
SXGA+ 1400x1050 60 65.3
UXGA 1600x1200 60 75  
Appendices  
						

							b. Extended Wide timingModes Resolution V.Frequency
[Hz] H.Frequency
[KHz]
WXGA 1280x720 60
44.8
1280x720 120 92.9
1280x800 60 49.6
1366x768 60 47.7
1440x900 60 59.9
WSXGA+ 1680x1050 60 65.3
c. HDMI - Video Signal
Modes Resolution V.Frequency
[Hz] H.Frequency
[KHz]
640x480p 640x480 59.94/6031.5
480i 720x480 
(1440x480) 59.94(29.97) 15.7
576i 720x576 
(1440x576) 50(25)
15.6
480p 720x480 59.94 31.5
576p 720x576 50 31.3
720p 1280x720 60 45
720p 1280x720 50 37.5
1080i 1920x1080 60(30) 33.8
1080i 1920x1080 50(25) 28.1
1080p 1920x1080 23.98/2427
1080p 1920x1080 60 67.5
1080p 1920x1080 50 56.3
d. HDMI 1.4a mandatory 3D timing- Video Signal
Modes Resolution V.Frequency
[Hz] H.Frequency
[KHz]
Frame 
Packing 720p
50
720p 59.94/60
1080p 23.98/24
Side-by-Side 1080i
50
1080i 59.94/60
Top-and- Bottom 720p
50
720p 59.94/60
1080p 23.98/24  
Appendices  
						

							List of specifications
ItemSpecification
Resolution WXGA
Graphics Card DMD Dimensions 0.65”
Projector Technology DLP
Projector Lens Fixed Lens, f/2.4
Lighting Technology Philips Smart Energy-Saving Lamp
Brightness 4000 Lumens
Contrast 10000:1 (High Contrast Ratio mode)
Supported resolution Up to 1080p @ 60Hz (CEA 861)
Throw Ratio 0.27
Weight (KG) 4.5KG
Dimensions 383mm(W) x 310mm(D) x 103mm(H) (excluding foot)
Light Power 260W
Light Life 3000 Hours / 4000 Hours (ECO Mode)
Total Power (W) 320W
Standby Power (W) 
						

							Other Terminals
Mini USB-BMini USB type B (for FW download)
RS232  DB9 Male terminal
RJ45 RJ45 for LAN control  
Appendices  
						

							Please note that
damage resulting
from incorrect
installation will void
the warranty.
Wall Mount Installation
If you wish to use a third party ceiling mount kit, please 
ensure the screws used to attach a mount to the projector 
meet the following specifications:
 Screw type: M4*4
 Minimum screw length: 10mm
 Warning: 
1. If you buy a ceiling mount from another
company, please
be sure to use the
correct screw size.
Screw size will vary
depending on the
thickness of the
mounting plate.
2. Be sure to keep at least 10 cm gap
between the ceiling
and the bottom of the
projector.
3. Avoid installing the projector near a heat
source.
Unit: mm
126.26
88.00
130.00382.44
310.18  
Appendices