Boxlight Projector P12 User Manual

							Using the Remote Control
Blank screenMomentarily turns off/on the audio and 
video.
HDMI1 Press “HDMI1” to choose HDMI IN 1 
connector.
HDMI2 Press “HDMI2” to choose HDMI IN 2 
connector.
VGA2 Press “VGA2” to choose VGA IN 2 
connector.
Video Press “Video” to choose Composite 
video source.
Freeze screen Pause the screen image. Press again 
to resume the screen image.
Image Select the color mode from Bright, PC, 
Movie, Game and User.  
User Controls  
						

							On-screen Display Menus
The Projector has multilingual On-screen Display menus that 
allow you to make image adjustments and change a variety of 
settings.
How to operate 
1.To open the OSD menu, press “Menu” on the Remote Control or
Projector Keypad.
2 When OSD is displayed, use the   keys to select any item 
in the main menu. While making a selection on a particular page, 
press the  
 or “Enter” key to enter sub menu.
3.Use the keys to select the desired item and adjust the 
settings using the 
 key.
4.Select the next item to be adjusted in the sub menu and adjust as
described above.
5.Press “Enter” to confirm, and the screen will return to the main
menu.
6.To exit, press “Menu” again. The OSD menu will close and the
projector will automatically save the new settings.
Main Menu
Settings
Sub Menu  
User Controls         
						

							Picture
Color ModeThere are many factory presets optimized for various types of im
-
ages. Use the ◄ or ► button to select the item.
Bright: For brightness optimization.
PC: For meeting presentation.
Movie: For playing video content.
Game: For game content.
User: Memorize user’s settings.
Wall Color Use this function to obtain an optimized screen image according 
to the wall color. 
Y
ou can select from “White”, “Light  Yellow,” “Light 
Blue,” “Pink,” and “Dark Green”.
Brightness
Adjust the brightness of the image.
Press the ◄ button to darken image.
Press the ► button to darken image.
 Contrast
The Contrast controls the difference between the lightest and dark -
est parts of the picture. Adjusting the contrast changes the amount 
of black and white in the image.
Press the ◄ button to decrease the contrast.
Press the ► button to increase the contrast.  
User Controls  
						

							 Sharpness
Adjust the sharpness of the image.
Press the ◄ button to decrease the sharpness.
Press the ► button to increase the sharpness.
 Saturation
Adjust a video image from black and white to fully saturated color.
Press the ◄ button to decrease the amount of saturation in the 
image.
Press the ► button to increase the amount of saturation in the image.
 Hue
Adjust the color balance of red and green.
Press the ◄ button to increase the amount of green in the im -
age.
Press the ► button to increase the amount of red in the image.
 Gamma
This allows you to adjust the gamma value to obtain the better im -
age contrast for the input.
 “Sharpness”, “Sat-
uration” and “Hue”
functions are only
supported under
video mode.  
User Controls  
						

							Screen
Aspect Ratio
Auto: Keep the image with original width-height ratio and maxi-
mize the image to fit native horizontal or vertical pixels.
4:3: The image will be scaled to fit the screen and displayed  using a 4:3 ratio.
16:9: The image will be scaled to fit the width of the screen and the height adjusted to display the image using a 16:9 ratio.
16:10: The image will be scaled to fit the width of the screen and the height adjusted to display the image using a 16:10 ratio. 
(only for SSI 1080p).
UWHD: The image will be scaled to fit the width of the screen and the height adjusted to display the image using a 16:6 ratio 
(only for Ultrawide).
 Phase Synchronize the signal timing of the display with the graphic card. 
If the image appears to be unstable or it
 flickers, use this function 
to correct it. Clock
Adjust to achieve an optimal image when there is a vertical flicker 
in the image.
H. Position
Press the ◄ button to move the image left.
Press the ► button to move the image right.
“H. Position” and
“V. Position” rang-
es will depend on
input source.  
User Controls  
						

							V. Position
Press the ◄ button to move the image down.
Press the ► button to move the image up.
Digital Zoom
Press the ◄ button to reduce the size of an image.
Press the ► button to magnify an image on the projection screen.
V Keystone
Press the ◄ or ► button to adjust image distortion vertically. If 
the image looks trapezoidal, this option can help make the image 
rectangular.
Ceiling Mount
Front: The image is projected straight on the screen.
Front Ceiling: This is the default selection. When selected, the image will turn upside down.
Rear: When selected, the image will appear reversed.
Rear Ceiling: When selected, the image will appear reversed in upside down position.  
User Controls  
						

							Setting
 Language
Choose the multilingual OSD menu. Press the ◄ or ► button 
into the sub menu and then use the ▲ or ▼ button to select your 
preferred language. Press ► on the remote control to finalize the 
selection.
Menu LocationChoose the menu location on the display screen.
Closed Caption
Use this function to enable close d caption menu. Select an 
appropri ate closed captions option: Off, CC1, CC2, CC3, and CC4.
VGA Output (Standby)
Choose “On” to enable VGA  OUT connection.  
User Controls  
						

							LAN (Standby)
Choose “On” to enable LAN connection. Choose “Off” to disable 
LAN connection.
VGA B (Function)
   
Input: Choose “Input” to let the VGA port work as a VGA 
input 
function.
    Output: Choose “Output” to enable the VGA Out function once 
the projector is powered on.
Test Pattern
Display a test pattern.
 Reset
Choose “Yes” to return the parameters on all menus to the factory 
default settings.   
User Controls  
						

							Volume
Speaker
Choose “On” to enable the speaker.
Choose “Off” to disable the speaker.
Line Out
Choose “On” to enable the line out function.
Choose “Off” to disable the line out function.
 Microphone
Choose “On” to enable the microphone.
Choose “Off” to disable the microphone.
 Mute
Choose “On” to turn mute on.
Choose “Off” to turn mute off.
 Volume
Press the ◄ button to decrease the volume.
Press the ► button to increase the volume.
Microphone Volume
Press the ◄ button to decrease the microphone volume.
Press the ► button to increase the microphone volume.  
User Controls  
						

							Options
 LogoUse this function to set the desired startup screen. If changes 
are made, they will take effect the next time the projector is 
powered 
on.
Default: The default startup screen.
User: Use stored picture from “Logo Capture” function.
Logo Capture
Press ► button to capture an image of the picture currently dis-
played on screen.
Auto Source
On: The projector will search for other signals if the current input 
signal is lost.
Off: The projector will only search current input connection.
 Input
Press ► button to enable/disable input sources. The projector will 
not search for inputs that are not selected. 
For successful logo
capture, please
ensure that the on-
screen image  
does
not exceed  the
projector’s  native
resolution.
(WXGA:1280x800).
 “Logo 
 Capture” is
not available when
3D is enabled.
 Before activating
this function, it is
recommended that
“Aspect Ratio” is
set to the “Auto.”  
User Controls