Boxlight Bl X25nu/x25nu User Manual

							39
Network Control Software Application
There are two ways to connect to the network control:
Auto IP address setting (DHCP setting is "ON"): 
(1) Enable DHCP from the projector on-screen-display menu, under "SECURITY  LAN SETTING".
(2) Please wait for the PC server to release IP address to the projector.
(3)            Enter "Given IP address (For example http://192.168.1.176/)" into the address bar of \
the web 
      browser and press “Enter” key or click “Go” button. 
						

							40
Network Control Software Application
Item Setting description:
ITEM SETTING DESCRIPTION
StatusShow	current	projector	status	and	network	configuration	settings.
Control Select projector’s detailed setting from this page.
Network Set	up	network	configuration	and	password	from	this	page.
Alert Show	and	setup	Alert	configurations.
Schedule Show	and	set	up	Schedule,	including	 Weekly	Schedule	and	Specific	Day.
If the Administrative & User password is enabled, select your User Name and ent\
er password to login.
 
  ADMINISTRATOR MODE
       adminstrator name: admin
       default password: 0000
  USER MODE
      user name: user
      default password: 1234 
						

							41
Network Control Software Application
Status :Show	current	projector	status	and	network	configuration	settings.
ITEM SETTING DESCRIPTION
IP Address Show current IP address.
System Status Show if projector is Power On or Inactive *.
Projector Name Show projector name.
Group Name Show group name.
Lamp Hours Show lamp used hours on current projector.
Filter HoursShow	filter	used	hours	on	current	projector.
Input Source Show current input source.
Date(y/m/d) Show date set on current projector.
Time Show time set on current projector.
MAC Address Show current MAC Address.
*      When system status shows "Inactive", it could either mean the projector \
is "Stand By Mode". 
						

							42
Network Control Software Application
Control:Select projector’s detailed setting from this page. 
ITEM SETTING DESCRIPTION
Basic
Projector Name Show projector name on the current projector.
System Status  how if projector is Power On or Inactive .
Power Switch Power On or Power Off the projector via network.
Input Source Select input source.
Date Setting Update date setting on the projector. Click "Submit" button to update the settings.
Time Setting Update time setting on the projector. Click "Submit" button to update the settings.
Picture
Brightness Adjust the image brightness level.
Contrast Adjust the image contrast level.
Sharpness Adjust the image sharpness.
ColorAdjust the strength of whole color.
This  function  can  only  be  used  under  Video  signal,  S-Video  signal,  or  component 
video signal input.
Tint Adjust the image tint.
This function can be used under Video signal, S-Video signal, or component video 
signal.
Display Mode Adjust Natural/Cinema/Daylight/Green Board/White Board/Black/User Mode.
Audio
Volume Adjust the volume.
Mute Mute the volume OFF / ON.
Setting
V Keystone  Manually correct vertical keystone distortion in image.
Auto Sync Set all of the above setting automatically. (This function can only be used under PC  mode)
Auto Search Search signal source manually or automatically.
Advanced
Freeze Freeze the current image on the screen.
Resize  4:3,16:9, 1:1, 16:10
Reset Reset all menu function to their factory default values.
Presentation
Projection Select Front/Ceiling/Rear/Celing and Rear
Lamp Mode Switch lamp mode between normal or ECO mode. 
						

							43
Network Control Software Application
Network :Set	up	network	configuration	and	password	from	this	page.
ITEM SETTING DESCRIPTION
Network
DHCPAssign an IP address to the projector from the DHCP server automatically.
IP Address Set up IP Address when DHCP is disabled.
Subnet Mask Set up Subnet Mask when DHCP is disabled.
Gateway Set up Gateway when DHCP is disabled.
DNS Server Set up DNS Server address when DHCP is disabled.
Group Name Create projector group. (Max length: 14 characters)
Projector Name Create projector naming of the current projector. (Max length: 14 characters)
Password:ADMIN
Administrator Turn  ON/OFF  administrative  password  function.Administrator  mode  can 
control the conditions on web.
New Password Enter administrative password.(Max length: 15 characters)
Confirm	Password Re-enter administrative password.
Password:USER
User Turn  ON/OFF  user  password  function.  User  mode  only  can  read  the 
conditions on web.
New Password Enter user password.(Max length: 15 characters)
Confirm	Password Re-enter user password. 
						

							44
Network Control Software Application
Alert:Show	and	setup	Alert	configurations.
When problem occurs to the projector, it will automatically send e-mail to remind user.
How to opearte:
1. Enter Email Setting columns.
2. Enter SMTP Setting columns.
3.	Select	 Alert	Condition.	Multiple	choices	are	fine.
4.	Press	Submit	to	confirm.
5.		 After	 completing	 Alert	Setting	 for	the	 first	 time,	 it	is	 recommended	 that	you	press	 Issue	Test	Mail	 to	
see if the attendees can receive the e-mail.  If the attendees cannot receive the e-mail, please check if 
the setting is correct or not.  If you have questions with the Alert Setting, please contact your network 
service provider.
ITEM SETTING DESCRIPTION
Email Setting
To Set up the mail alert attendee. (Max length: 40 characters)
Cc Set up the backup mail alert attendee. (Max length: 40 characters)
Subject Set up the subject of the alert e-mail. (Max length: 40 characters)
From Set up the sender e-mail address. (Max length: 40 characters)
SMTP Setting
Server To  enter  the  SMTP  server  (Mail  server)  name  of  the  company  or  IP 
address.(Max length: 40 characters)
User Name Enter the sender’s e-mail address. (Max length: 40 characters)
For example: [email protected]
Password Enter password of the sender’s e-mail account. (Max length: 15 characters)
Alert Condition
Fan Lock The cooling fan is not operating.
Over Temperature The projector internal is over heated.
Lamp fail The lamp does not light up.
Lamp Time Alert  Lamp has reached its life time. Suggest changing the lamp.
Lamp Cover Opened Lamp Cover does not close well.
Filter Time Alert Filter	has	reached	its	life	time.	Suggest	cleaning	the	filter. 
						

							45
Network Control Software Application
Schedule :Show	and	set	up	Schedule,	including	Weekly	Schedule	and	Specific	Day.
Weekly Schedule
To power on and power off projector based on Weekly Schedule.
How to set up:
1. Choose week days.
2. Set up power-on or power-off time.
    (  Please be sure that the interval between power-on and off setting is more than 5 minutes.)
3. Enter Input Source and select input source.
4.	 After	completing	setting,	press	 ADD	to	confirm.
5. To cancel items, select the item and press "Cancel" button.
Specific Day
Based	on	Specific	Day	to	set	up	power-on	and	power-off	time.
How to set up:
1. Choose power-on days and time.
2. Choose power-off days and time.
    (  Please be sure the setting period between power-on time and off time is greater than 5 minutes.)
3. Enter Input Source and select input source.
4.	 After	completing	setting,	press	 ADD	to	confirm.
5. To cancel items, select the item and press "Cancel" button. 
						

							46
Before Use
Activate Network Control Software
	Execute the Network Control Software.
 
		Monitor window below appears.
 
						

							47
Before Use 
Projector Auto Search.
		Click the  (Projector search), located projector will show on the network 
correctly. 
(Graph2)
		 Click  (search again), the projector which is well connected with a PC will be 
shown. 
(Graph3)
NOTE
When the security warning window appears while Network Control is execut\
ing, 
please select "Unblock" to decontrol area network linking against from S\
ystem 
Administer.


NOTE
If there is no projector found on the display window, the following maybe the causes:
1.    There is no DHCP server available on the LAN. The LAN module is shipping 
with	DHCP-configured	client	enabled	in	default.
2.   If there is no DHCP server available on the LAN. The LAN module default IP 
address should be 169.254.1.1. Please modify the PC/Laptop IP address setting to 
make the PC/Laptop IP address located on the same segment as 169.254.xxx.xxx 
and try again. 
						

							48
Before Use
		Projector Auto Search can rank group names or display names by clicking the 
monitor window title (Group Name) or (Projector Name). This will help you easily 
to understand projectors status.

 Monitor window
		Click  (register projector), the projector information will show on the monitor 
window. Click 
 button (exit), it will cancel the registered item then return to 
register table.
Projector Auto Search.