Bose Cinemate 2 Owners Manual

19
CONTROLS AND INDICATORS
ItalianoSvenska
Deutsch Nederlands
English Français
Español
Follow the same procedure for each of your other 
devices, using the appropriat e device code and source 
button for each one.
To control a combination device
 If you are programming the remote to control a  combination device that has more than one source, 
such as a VCR/DVD unit, you can program the 
combination code into either remote control source. 
You may find it convenient to program the code twice 
– once for...

20
CONTROLS AND INDICATORS
Italiano
Svenska Deutsch
Nederlands English
Français Español
Using the remote to watch a DVD
Note:  In order to control your TV and other audio/video 
devices using the remote control, you must first 
program the remote with a device code for each device.
1. Press  TV On-Off  to turn on your TV and the 
CineMate
®speaker system. The green LED on 
the front of the interface module will light.
2. Press  DVD On-Off to turn on 
your DVD player.
3. Press the DVD  source button. 
The...

21
CONTROLS AND INDICATORS
ItalianoSvenska
Deutsch Nederlands
English Français
Español
Using the CineMate®  GS  
series II remote control
Note:  In order to control your TV and other audio/video 
devices using the remote control, you must first 
program the remote with a device code for each device.
Source and input selection
  Video:  Selects the correct TV input for 
the source you want to watch. These 
inputs are commonly labeled TV, Video 1, 
Video 2, and AUX. If you have multiple inputs 
connected...

22
CONTROLS AND INDICATORS
Italiano
Svenska Deutsch
Nederlands English
Français Español
Menu and program selection
Note:  The menu and pr ogram selection buttons will 
control only one source at a time, depending on which 
source is selected on your remote (TV, CBL-SAT, DVD, 
VCR, or AUX). 
 Exits the Setup mode.
 Exits the menu or Electronic 
Program Guide of the currently 
selected source (if supported).
 Skips ahead one page in the  Electronic Program Guide 
(if supported). 
CBL-SAT source must be...

23
CONTROLS AND INDICATORS
ItalianoSvenska
Deutsch Nederlands
English Français
Español
Play options
Note:  The functionality of the play options buttons 
may vary depending on the brand of your device(s). 
Some features may not be supported by your brand. 
See your owner’s guide(s) for more information.
 Skips to the next or previous 
channel, CD track, or DVD chapter.
 Raises or lowers the volume of the  current source. 
 Pressing  + restores muted sound 
from the current source.
 Pressing  – lowers the...

24
CONTROLS AND INDICATORS
Italiano
Svenska Deutsch
Nederlands English
Français Español
 Switches between VCR and TV  as the current video input source 
on your VCR or VCR combination 
device.
 Switches between widescreen  options and normal TV display 
(if supported).
 Displays the list of DVR recorded  programs (if supported).
 Displays cable/satellite program  information (if supported).
Cable-specific buttons
These buttons operate cable-
specific functions (if supported).
TeleText buttons (Europe...

ItalianoSvenska
Deutsch Nederlands
English Français
Español
25
CARE AND MAINTENANCE
Replacing the CineMate® 
series II remote battery
Replace the battery when the remote control stops 
operating or its range seems reduced. Insert a CR2032 
or DL2032 battery into the compartment on the back of 
the remote control.
1.Using a coin, turn the battery cover slightly 
counterclockwise.   2.
Remove the used battery and replace with a new 
battery (CR2032 or DL2032). Refer to page ii for 
battery safety...

26
CARE AND MAINTENANCE
Italiano
Svenska Deutsch
Nederlands English
Français Español
Replacing the CineMate®  GS  
series II remote batteries
Replace both batteries when the remote control stops 
operating or its range seems reduced. Alkaline 
batteries are recommended.
1. Slide open the battery compartment cover on the 
back of the remote.
2. Remove both batteries.
Be sure to dispose of the batteries according to the 
regulations in your area.
3. Insert two AA (IEC-R6) 1.5V batteries, or the...

27
CARE AND MAINTENANCE
ItalianoSvenska
Deutsch Nederlands
English Français
Español
Troubleshooting
ProblemWhat to do
No power
 Unplug the Acoustimass® module power cord from the AC wall outlet for one minute. 
 Make sure the power cord is inserted  securely into the Acoustimass module. 
 Reconnect the power cord firmly in to an operating AC wall outlet. The green LED should flash 10 times, 
then extinguish (the system will then be in standby).
 Make sure the interface module is plugge d into the...

28
CARE AND MAINTENANCE
Italiano
Svenska Deutsch
Nederlands English
Français Español
Customer service
For additional help in so lving problems, contact Bose® 
Customer Service. Refer to the address sheet included 
with the CineMate system.
Sound but no 
picture  Make sure the TV is turned on.
 Check that the correct TV/Video input is se
lected. See “Selecting the TV input” on page 20.
Remote control is 
inconsistent or 
does not work  Check the battery to be sure it is installed properly.
 Point the...