Bose Cinemate 2 Owners Manual

							CINEMATE
®
 SERIES II
C
INEMATE
®
  GS  SERIES II
©2009 Bose Corporation, The Mountain,
Framingham, MA 01701-9168 USA
AM323023 Rev.00
CINEMATE
® SERIES
 II and C
INEMATE
® GS  
SERIES
 II
Owner’s Guide
Guía de usuario
Notice d’utilisation
Guia dos proprietários
DIGITAL HOME THEA TER SPEAKER SYSTEM
AM323023_Cover.fm  Page 1  Monday, May 18, 2009  10:36 AM 
						

							ii
Italiano
Svenska Deutsch Nederlands English Français Español
SAFETY INFORMATION
©2005 Bose Corporation No part of this work may be reproduced modified distributed or otherwise used without prior written permission
i Please read this guide
Please take the time to follow the instructions in this guide carefully. It will help 
you set up and operate your system prop erly and enjoy all of its advanced 
features. Please save this guide for future reference.
The interface module is to be used only with the Acoustimass
® module in the 
CineMate® system.
WARNING:  To reduce the risk of fire or electrical shock, do not expose the 
product to rain or moisture. 
WARNING: 
Do not expose this apparatus to dripping or splashing, and do not 
place objects filled with liquids, such as vases, on or near the apparatus. As with 
any electronic products, use care not to spill liquids into any part of the system. 
Liquids can cause a failure and/or a fire hazard
.
WARNING: 
The lightning flash with arrowhead symbol within an equilateral triangle 
alerts the user to the presence of uninsulated, dangerous voltage within 
the system enclosure that may be of su fficient magnitude to constitute a 
risk of electrical shock.
The exclamation point within an equilateral triangle, as marked on the 
system, is intended to alert the user to the presence of important 
operating and maintenance instructions in this owner’s guide.
CAUTION:  Make no modifications to the syst em or accessories. Unauthorized 
alterations may compromise safety, regulatory compliance, and system 
performance.
WARNING: 
Keep the remote control battery away from children. It may cause a fire 
or chemical burn if mishandled. Do not recharge, disassemble, heat above 100ºC 
(212ºF), or incinerate. Dispose of used batte ries promptly. Replace only with a battery 
of the correct type and model number.
WARNING:  Danger of explosion if battery is incorrectly replaced. 
CineMate series II remote—Replace only with Duracell, Eveready, Energizer, 
Maxell, Toshiba, or Shun Wo CR2032 or DL2032 3-volt lithium battery.
Please dispose of us ed batteries properly, following any local regulations. Do 
not incinerate.
WARNING:  Do not place any naked flame sources, such as lighted candles, on or 
near the apparatus.
This product conforms to the EMC Direct ive 2004/108/EC and to the Low Voltage 
Directive 2006/95/EC. The complete Declaration of Conformity can be found at
www.Bose.com/static/compliance/index.html.
Note:  Where the mains plug is used as the disconnect device, such disconnect 
device shall remain readily operable.
Note:  This product must be used indoors. It is neither designed or tested for use 
outdoors, in recreation vehicles, or on boats.
Additional Safety InformationSee the additional instructions on the Important Safety Instructions sheet (North 
America only) enclosed in the shipping carton.
For your recordsThe serial number is located on the rear of the Acoustimass module.
Serial number:  ______________________________________________
Dealer name:  _______________________________________________
Dealer phone:  _______________________________________________
Purchase date:  ______________________________________________
We suggest you keep your sales receipt and product registration card
together with this owner’s guide.
©2009 Bose Corporation. No part of this work may be reproduced, modified, 
distributed, or otherwise used without prior written permission.
00.Kaiser_OG.book  Page ii  Fr iday, May 15, 2009  7:15 AM 
						

							CONTENTS
iii
ItalianoSvenska
Deutsch Nederlands
English Français
Español
INTRODUCTION 2
Before you begin   . . . . . . . . . . . . . . . . . . . . . 2
Unpacking   . . . . . . . . . . . . . . . . . . . . . . . . . . 3
SYSTEM SETUP 4
1 Placing the system components  . . . . . . . . . . . . .  4
2 Connecting the speakers to the 
Acoustimass® module   . . . . . . . . . . . . . . . . . . . .  7
3 Connecting the interface module   . . . . . . . . . . . .  9
4 Connecting the TV audio to the interface module  10
Connecting optical audio  . . . . . . . . . . . . . . . . .  10
Connecting analog audio  . . . . . . . . . . . . . . . . .  11
Turning off the TV internal speakers  . . . . . . . . .  11
5 Connecting to a power outlet   . . . . . . . . . . . . . . .  12
6 Inserting the CineMate® GS remote batteries   . .  14
CONTROLS AND INDICATORS 15
Acoustimass® module bass control   . . . . . . . 15
CineMate
® series II remote control  . . . . . . . . 16
Using the remote to control the 
CineMate system   . . . . . . . . . . . . . . . . . . . . . . .  16
CineMate®  GS  series II remote control  . . . . . 17
Using the remote to control the 
CineMate® system  . . . . . . . . . . . . . . . . . . . . . . . 18
Setting the remote for your TV and 
other devices  . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
To control a combination device  . . . . . . . . . . . . 19
Using the remote to watch TV  . . . . . . . . . . . . . . 19
Using the remote to watch a DVD  . . . . . . . . . . . 20
Selecting the TV input  . . . . . . . . . . . . . . . . . . . . 20
Switching control from one device 
to another   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Using the CineMate®  GS  series II 
remote control   . . . . . . . . . . . . . . . . . . . . . . . 21
CARE AND MAINTENANCE 25
Replacing the CineMate® series II 
remote battery   . . . . . . . . . . . . . . . . . . . . . . . 25
Replacing the CineMate
®  GS  series II 
remote batteries   . . . . . . . . . . . . . . . . . . . . . . 26
Cleaning your speaker system  . . . . . . . . . . . 26
Troubleshooting   . . . . . . . . . . . . . . . . . . . . . . 27
Customer service   . . . . . . . . . . . . . . . . . . . . . 28
REFERENCE 29
00.Kaiser_OG.book  Page iii  Friday, May 15, 2009  7:15 AM 
						

							2
Italiano
Svenska Deutsch Nederlands English Français Español
INTRODUCTION
Before you begin
Thank you for purchasing the Bose® CineMate® system, 
which delivers the superb acoustic performance 
needed to enjoy the full audio impact of DVDs and 
other exciting home entertainment. 
The CineMate system comes in two configurations:
 CineMate series II – includes the standard CineMate  speakers and a simple remote control.
 CineMate  GS series II – includes the smaller 
Gemstone
® speakers and a universal remote control.
Both configurations include an attractive floor-standing 
Acoustimass
® module for deep bass sound and an 
interface module that provides simple audio 
connections to your TV.
Using our TrueSpace
® signal processing technology, 
the CineMate system speakers provide improved 
spaciousness for bold 3-D effects and movie-like 
realism from surround encoded DVDs and other 
entertainment sources. In fact, they provide much of 
the performance of premium five-speaker systems from 
a modest array of equipment. 
Setup help
The CineMate system easily co nnects to your TV and 
other home theater equipment. To help you set up your 
CineMate system, the following items are provided:
• Quick Setup Guide

 Detailed instructions in  the Setup section of this 
owner’s guide
00.Kaiser_OG.book  Page 2  Fr iday, May 15, 2009  7:15 AM 
						

							3
INTRODUCTION
ItalianoSvenska
Deutsch Nederlands
English Français
Español
Unpacking
Carefully unpack your CineMate® system. Save all 
packing materials, which provide the safest way to 
transport your sy stem. If any part of the system 
appears damaged, do not try to use it. Notify Bose or 
your authorized Bose dealer immediately. For Bose
® 
contact information, refer to the address sheet included 
in the carton.
WARNING:  To avoid danger of suffocation, keep the 
plastic bags out of the reach of children.
As you identify them, you may want to place a check 
mark in the box next to the name of each part.
Note: Now is a good time to find the serial number on 
the rear of the Acoustimass® module. Copy that number 
in the space provided on page ii for easy reference when 
registering your system.
 
❏ Cinemate series II speakers
OR
❏ CineMate  GS series II
Gemstone
® speakers ❏
Acoustimass module
❏ Small rubber feet 
❏Large rubber feet 
❏ CineMate series II remote 
OR 
❏ CineMate  GS series II remote ❏
Interface module 
❏ Speaker cable ❏
Power cord
❏ Stereo cable ❏
Optical cable
00.Kaiser_OG.book  Page 3  Fr iday, May 15, 2009  7:15 AM 
						

							Italiano
Svenska Deutsch
Nederlands English
Français Español
4
SYSTEM SETUP
The image below shows one of the many ways you can 
position your system.
See Steps 1-5 for details.
1
Placing 
the system 
components
What you need to use:
Interface module
CineMate®  GS  series II
Gemstone® speakers  OR 
CineMate series II speakers
Acoustimass® module
3 
ft  
(
1  
m
) 
o r
 m
or
e
3  
f t
 (1  
m )
 
o r m
o
re
3
 f
t  
( 1
 m
) 
o r
 l e
ss
L e
f
t
Rig
h
t
00.Kaiser_OG.book  Page 4  Fr iday, May 15, 2009  7:15 AM 
						

							5
SYSTEM SETUP
ItalianoSvenska
Deutsch Nederlands
English Français
Español
1. On the bottom of each speaker, attach one set of 
small rubber feet. 
2. Place the left and right speakers: 
 at least 3 feet (1 meter) apart
 within 3 feet (1 meter) of the TV screen 
 near the front edge of any shelf
 aimed straight ahead (not angled) to face the  listening area.
3. On the legs of the Acoustimass
® module, attach the 
large rubber feet.  4.
Place the Acoustimass module: 
 at the same end of the room as the speakers and  your TV
 at least 3 feet (1 meter) from the TV to prevent  interference with the screen
 at least 2.5 feet (.8 meters) from audio or video  tapes to prevent magnetic damage to them
 within reach of the cable from the interface  module and an AC (mains) power outlet
 with the front port aimed out from or along a wall  for balanced performance
 hidden under a table, behind a sofa or chair, or  behind drapes as preferred
 NOT in an enclosure, on a bed, on a sofa, or on a  surface that can block the ventilation openings.CAUTION:  Do not block ventilation openings on the 
bottom and rear of the module. 
Note: Keep in mind that the Acoustimass module is the 
only part of this system that  connects to a power outlet.
00.Kaiser_OG.book  Page 5  Fr iday, May 15, 2009  7:15 AM 
						

							6
SYSTEM SETUP
Italiano
Svenska Deutsch
Nederlands English
Français Español
The interface module receives commands from the  
remote control and provides audio input connections 
for the CineMate
® system. The remote control 
commands allow you to turn the speakers on, change 
the volume, and mute or turn off the speaker system.
5. Place the interface module: 
 on a flat surface near the TV and other home  theater equipment
 within 15 feet (4.6 meters) of the Acoustimass
® 
module
 NOT in direct sunlight If you position the 
interface module on a shelf, 
make sure the front edge of the module is flush 
with the front edge of the shelf. If on a high shelf, 
make sure the front edge of the module extends 
slightly past the front of th e shelf, so the shelf does 
not block signals from the remote control.
Peel the protective film off the lens on the front of 
the 
interface module.
Note:  The remote should have a clear line of sight to 
the interface module, the TV, and any other equipment 
it will control.
CAUTION:  When positioning the interface module, 
avoid blocking any ventilation openings on the TV or 
other electroni cequipment.
Continue with   on the next page.
2
00.Kaiser_OG.book  Page 6  Fr iday, May 15, 2009  7:15 AM 
						

							7
SYSTEM SETUP
ItalianoSvenska
Deutsch Nederlands
English Français
Español
1.Notice the two plugs at one end of the speaker 
cable.
2. Separate the two plugs so each one reaches a 
speaker.
2
Connecting the 
speakers to the 
Acoustimass
® module
What you need to use:
Acoustimass module
Speaker cable
CineMate® GS  series II 
Gemstone® speakers  OR 
CineMate series II speakers
00.Kaiser_OG.book  Page 7  Fr iday, May 15, 2009  7:15 AM 
						

							8
SYSTEM SETUP
Italiano
Svenska Deutsch
Nederlands English
Français Español
3. Insert each plug into the connector on the proper 
speaker. 
The plug marked RIGHT goes into the speaker 
placed to the right of your TV (facing toward the TV).
(Refer to   for placement guidelines.) 4.
Insert the single plug at the other end of 
the speaker cable into the connector 
labeled SPEAKERS on the back of the 
Acoustimass
®module.
5. Tighten each fastener screw by hand to secure 
the plug.
CAUTION:  Do not plug the Acoustimass module into 
an AC power (mains) outlet until all other components 
are connected.
6. Continue with   on the next page.
1
Fastener screws 
3
00.Kaiser_OG.book  Page 8  Fr iday, May 15, 2009  7:15 AM