Black and Decker Iron ICR2010 User Manual

TM
ADVANCED STEAM CORD REEL IRON
PLANCHA CON SISTEMA AVANZADO DE VAPOR Y 
CABLE RETRACTABLE
\fER À VAPEUR À ENROULEUR DE\B CORDON INTÉ\bRÉ
use and care manual
manual de uso y cu\Cidado
guide d’utilisation et d’entretien
IC\f2010\b IC\f2020\b IC\f2030\b IC\f2040 

2
Should you have any questions or concerns with your new product, 
please call our Customer Service Line at 1-800-231-9786 (US and 
Canada). Please do not return to the store.
Si usted tiene alguna inquietud o pregunta con su producto, por 
favor llame a nuestra línea de servicio al cliente una atención 
inmediata 1-800-231-9786 (EE.UU/Canadá) 01-800-714-2503 
(México). No devuela a la tienda.
Si vous avez des questions ou des préoccupations à propos de 
votre nouveau produit, veuillez communiquer avec...

3
•  READ ALL INSTRUCTIONS BEFORE USING.
•  Only use iron for intended use. 
•  To avoid the risk of electric shock, do not 
immerse the iron in water or other liquids.
•  Always turn the iron to MIN setting before 
plugging in or unplugging from the outlet. 
Never pull on the cord to disconnect from 
the electrical outlet; instead grasp plug and 
pull to disconnect. 
•  Do not allow cord to touch hot surfaces. 
Let iron cool completely before putting 
away. Gently wind the cord back into the 
housing by...

4
GETTING TO KNOW YOUR  
VITESSA™ IRON
9
1.  Soleplate
2.  Spray nozzle
3.  Water-fill cover
4.  SmartSteam™ dial
5.  Spray mist button 
6. Burst of steam button 
7.  Power/auto shut-off light 
8.  Auto-Clean™ button
9.  Cord reel button
10.  Water tank 
11.  Heel rest
Product may vary slightly from what is illustrated.
12 3
4 56
78
10
11  

5
HOW TO USE
This product is for household use o\Bnly. 
GETTING STARTED
•   Remove all labels, tags an\Bd stickers attached to the body, cord, or 
soleplate of the iron and the plastic band around the power plug.
•  Remove and save literature. 
FI\f\fING THE WATER TANK
1.    With the iron on a flat surface, with the soleplate down 
or tilted at 45° angle, open the water-fill cover. (A)
2.    Using a clean measuri\Bng cup, pour water into 
opening until water reaches the “MAX” level mark on 
the side of...

6
6.   Iron as long as needed\B. Note that if the iron is left inactive, the 
3-Way Auto Shut off Safety feature will activate. Please see 
Additional \features section for more details. 
7.    When finished ironing, turn the di\Bal to the MIN setting \Band unplug 
from the outlet. 
8.    Stand the iron on its heel rest and allow it to completely cool off 
before storing. 
SETTING GUIDE
\for best results it’s recommended to use the manufacturer’s garment tags 
for heat and steam instructions. When in\B...

7
SmartSt\bam™ T\bchnologyThis technology gives you the control of both soleplate 
heat and steam level in one dial. On \Btraditional irons the 
controls are separated, making it diffic\Bult to know what 
settings are right for each fabric. These simple controls 
take the guesswork out of ironing and ensure optimal 
results every time. (C)
Burst of St\bam  
Press the burst of steam button to generate additional steam. \for best 
performance, leave several seconds between bursts. This feature works on...

8
C\fEANING AND CARE
This product contains no user ser\Bviceable parts. Refer to qualified service 
personnel. 
C\fEANING OUTSIDE SURFACES1.   Make sure the iron is unplugged and\B has completely cooled. 
2.    Wipe the soleplate and outer surface with a soft, damp \Bcloth. Water 
and small amounts of \Bgentle household s\Boaps, such as dishwashing 
liquid, can be used\B. Never use heavy-duty cleaners, vin\Begar or 
abrasive scouring pads that may scratch or discolor the iron. 
3.    After the iron has...

9
STORING YOUR IRON1.   Check that the iron is on the MIN s\Betting, unplugged \Band 
completely cool.
2.    Press the cord reel button on the heel of \Bthe iron to 
start retracting the cord into the housing. Slo\Bwly reel 
in the cord, being careful to avoid cord bunching. (D)
3.    Emptying the water tank is recommended after use. Any water left 
in the tank could discolor and cause staining. Simply ope\Bn the water 
tank door and hold t\Bhe water upside down over a sink until the\B tank is 
empty....

10
TROUB\fESHOOTING
Probl\bmCaus\bSolution
The iron is plugged in, \B
but the soleplate is not 
heating. Power supply issue.
Check that the plug is 
properly inserted into the 
outlet or try plug\Bging the 
iron into a different outlet. 
Not enough steam or no 
steam is coming out of 
the iron.  SmartSteam™ setting 
selected is too low. 
Lower heat levels are not 
intended to have steam.Turn the SmartSteam™ 
Dial to settings 4–6 to iron 
with steam. 
Not enough water in the 
water tank. \follow the...