BenQ W1060 Digital Projector User Manual

Connections 21
EnglishConnecting HDMI source devices
The projector provides a HDMI input jack that allows you to connect it to a HDMI source 
device like a DVD player, a DTV tuner or a display.
HDMI (High-Definition Multimedia Interface) supports uncompressed video data 
transmission between compatible devices like DTV tuners, DVD players and displays over a 
single cable. It provides pure digital viewing and listening experience.
Examine your Video source device to determine if it has a set of unused...

Connections
22
EnglishConnecting Component Video source devices
Examine your Video source device to determine if it has a set of unused Component Video 
output jacks available: 
• If so, you can continue with this procedure.
• If not, you will need to reassess which method you can use to connect to the device.
To connect the projector to a Component Video source device:
1. Take a Component Video cable and connect the end with 3 RCA type connectors to 
the Component Video output jacks of the Video source...

Connections 23
EnglishConnecting S-Video source devices
Examine your Video source device to determine if it has an unused S-Video output socket 
available: 
• If so, you can continue with this procedure.
• If not, you will need to reassess which method you can use to connect to the device.
To connect the projector to an S-Video source device:
1. Take an S-Video cable and connect one end  to the S-Video output socket of the Video 
source device.
2. Connect the other end of the S-Video cable to the S-VIDEO...

Connections
24
EnglishConnecting Composite Video source devices
Examine your Video source device to determine if it has a set of unused composite Video 
output sockets available: 
• If so, you can continue with this procedure.
• If not, you will need to reassess which method you can use to connect to the device.
To connect the projector to a composite Video source device:
1. Take a Video cable and connect one end to the composite Video output socket of the 
Video source device.
2. Connect the other end...

Operation 25
EnglishOperation
Starting up the projector
1. Plug the power cord into the projector and into a wall socket. Turn on the wall socket 
switch (where fitted). Check that the 
POWER indicator light  on the projector 
lights orange after power has been applied.
Please use the original accessories (e.g. power 
cable) only with the device to avoid possible 
dangers such as electric shock and fire.
2. Press  POWER on the projector   or 
remote control   to start the projector 
and a start up tone...

Operation
26
EnglishUsing the menus
The projector is equipped with On-Screen Display (OSD) menus for making various 
adjustments and settings.
Below is the overview of the OSD menu.
To use the OSD menus, please set them  to your familiar language first.
Securing the projector
Using a security cable lock
The projector has to be installed in a safe place to prevent theft. Otherwise, purchase a lock, 
such as a Kensington lock, to secure the projector. You can locate a Kensington lock slot on 
the left side...

Operation 27
EnglishUtilizing the password function
For security purposes and to help prevent unauthorized use, the projector includes an 
option for setting up password security. Th e password can be set through the On-Screen 
Display (OSD) menu. For details of the OSD menu operation, please refer to  Using the 
menus on page 26 .
You will be inconvenienced if you activate th e power-on lock functionality and subsequently 
forget the password. Print out this manual (if necessary) and write the password...

Operation
28
EnglishEntering the password recall procedure
1. Press and hold  AUTO on the projector or remote 
control for 3 seconds. The projector will display a 
coded number on the screen.
2. Write down the number and turn off your  projector.
3. Seek help from the local BenQ service center to  decode the number. You may be required to 
provide proof of purchase documentation to 
verify that you are an authorized user of the 
projector.
Changing the password
1. Open the OSD menu and go to the  SYSTEM...

Operation 29
EnglishSwitching input signal
The projector can be connected to multiple devices at the same time. However, it can only 
display one full screen at a time. 
You can also manually cycle through the 
available input signals.
1. Press SOURCE on the projector or remote 
control. A source selection bar displays. 
2. Press  /  until your desired signal is  selected and press  MODE/ENTER.
Once detected, the selected source 
information will display on the screen for 
seconds. If there is multiple...

Operation
30
EnglishAdjusting the projected image
Adjusting the projection angle
Remove the Back Foot Holder on the rear adjuster foot before adjusting the projection angle.
The projector is equipped with 1 quick-release adjuster foot and 1 rear adjuster foot. These 
adjusters change the image height and proj ection angle. To adjust the projector:
1. Press the quick-release button and lift the front 
of the projector. Once the image is positioned 
where you want it, release the quick-release 
button to...