Home > BenQ > Monitor > BenQ V2200 Eco User Manual

BenQ V2200 Eco User Manual

Here you can view all the pages of manual BenQ V2200 Eco User Manual. The BenQ manuals for Monitor are available online for free. You can easily download all the documents as PDF.

Page 31

  31   How to adjust your monitor
H. Position Adjusts the horizontal 
position of the OSD menu. Press the   or   keys to 
change the settings. 0 to 100
V. Position Adjusts the vertical position 
of the OSD menu.0 to 100
Display Time Adjusts the display time of 
the OSD menu.• 5 Sec.
• 10 Sec.
• 15 Sec.
• 20 Sec.
• 25 Sec.
• 30 Sec.
OSD Lock Prevents all the monitor 
settings from being 
accidentally changed. When 
this function is activated, the 
OSD controls and hotkey 
operations will be disabled.Press...

Page 32

32  How to adjust your monitor  
*DDC/CI, short for Display Data Channel/Command Interface, which was developed by Video Electronics 
Standards Association (VESA). DDC/CI capability allows monitor controls to be sent via the software for 
remote diagnostics.
HDMI Auto 
SwitchWhen this function is 
activated, HDMI port will 
be in the input auto select 
loop.Otherwise, HDMI can 
only be selected by input 
select or by hot key.Press the ENTER key to select 
this option. Press the   or 
 keys to change the...

Page 33

  33   Troubleshooting
7. Troubleshooting
Frequently asked questions (FAQ)
The image is blurred:
Read the instructions in Adjusting the screen resolution on page 35, and then select the correct 
resolution, refresh rate and make adjustments based on these instructions.
How do you use a VGA extension cable?
Remove the extension cable for the test. Is the image now in focus? If not, optimize the image by 
working through the instructions in Adjusting the screen refresh rate on page 36. It is normal for...

Page 34

34 Troubleshooting  
Is the prompt on the display illuminated in orange?
If the LED is illuminated in orange, the power management mode is active. Press any button on 
the computer keyboard or move the mouse. If that does not help, check the signal cable 
connectors. If any pin is bent or broken off, please contact your dealer to get necessary support.
Is the prompt on the display not illuminated at all?
Check the power supply mains socket, the external power supply and the mains switch.
The image is...

Page 35

  35
Adjusting the screen resolution
Due to the nature of liquid crystal display (LCD) technology, the picture resolution is always fixed. 
For the best display performance, please set the display to its maximum resolution with an aspect 
ratio of 16:9. This is called “Native Resolution” or maximal resolution – that is, the clearest 
picture. Please refer to the table below for the native resolution of your LCD. Lower resolutions are 
displayed on a full screen through an interpolation circuit. Image...

Page 36

36   
Adjusting the screen refresh rate 
You don’t have to choose the highest possible refresh rate on an LCD display, because it is not 
technically possible for an LCD display to flicker. The best results are obtained by using the factory 
modes already set in your computer. Check next chapter to see the factory modes: Preset display 
modes on page 37.
You can choose 59.934 Hertz for the native resolution of 1920 x 1080. Not applicable in all models. Please 
refer to the table on page 35.
1. Double...

Page 37

  37
Preset display modes
•Image disruption may occur as a result of signal frequency differences from graphic cards 
which do not correspond with the usual standard. This is not, however, an error. You may 
improve this situation by altering an automatic setting or by manually changing the phase 
setting and the pixel frequency from the “DISPLAY” menu.
•To extend the service life of the product, we recommend that you use your computers power 
management function. 
Incoming display mode (Input timing)...

Page 38

38   
Recycling information
Recognizing the importance of environmental protection and assigning itself the responsibility of 
protecting the global environment, BenQ has endeavored, and will steadily continue to endeavor, 
to construct recycling systems around the world so as to collect and recycle the used monitors 
from our customers. Therefore, we would sincerely appreciate your support in properly recycling 
or disposing of your monitor at the end of its life cycle.
This recycling information guide...

Page 39

  39
Czech RREMA lOOO IK, a.s.
Bavorská 856 
155 41 Praha 5
Česká republika
Tel.: +420 224 454 224
Fax: +420 224 454 422
E-mail: [email protected]
www.remasystem.cz
Denmark Elretur A/S
Tel.: +45 33 36 91 98
E-mail: [email protected]
Norway Elretur AS
Tel.: +47 23 06 07 40
E-mail: [email protected]
Estonia EES - Ringlus
Endla 3, 10122 Tallinn,
 
Tel.: +372 6 484 335
Fax: +372 6 307 300
E-mail: [email protected]
www.eesringlus.ee
Finland Elker OY
Tel.: +358 (0)10 249 17 00
E-mail: [email protected]...

Page 40

40   
Hungary ELECTRO-COORD Magyarország Kht.
Márvány utca 18,   
H-1012 Budapest
Tel.: (+36-1) 224-7730,
Fax: (+36-1) 224-7739
E-mail: [email protected]
www.electro-coord.hu
Ireland Midia Ltd  
Tel.: +353-1-4199733
Fax: +353-1-4565120  
Unit B Montone Business Park 
Oak Road 
Dublin 12
Luxembourg Ecotrel
7, rue Alcide de Gasperi
L-1615 Luxembourg (Kirchberg)   
Tel.: +352 26098731
Fax: +352 26098736
www.ecotrel.lu
Netherland ICT Milieu 
Tel.: +31-0348493640                           
E-mail:...
Start reading BenQ V2200 Eco User Manual

Related Manuals for BenQ V2200 Eco User Manual

All BenQ manuals