Home > BenQ > Monitor > BenQ V2200 Eco User Manual

BenQ V2200 Eco User Manual

Here you can view all the pages of manual BenQ V2200 Eco User Manual. The BenQ manuals for Monitor are available online for free. You can easily download all the documents as PDF.

Page 1

Welcome
LCD Monitor
User Manual
V2200 Eco
V2400 Eco
 

Page 2

Copyright
Copyright © 2010 by BenQ Corporation. All rights reserved. No part of this publication may be 
reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language 
or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, 
chemical, manual or otherwise, without the prior written permission of BenQ Corporation.
Disclaimer
BenQ Corporation makes no representations or warranties, either expressed or implied, with 
respect to the...

Page 3

Table of Contents
Copyright .......................................................................................................................... 2
Disclaimer ......................................................................................................................... 2
Getting started  .................................................................................................................. 4
Getting to know your monitor...

Page 4

4  Getting started  
1. Getting started
When unpacking please check you have the following items. If any are missing or damaged, please 
contact the place of purchase for a replacement.
 
Consider keeping the box and packaging in storage for use in the future when you may need to transport 
the monitor. The fitted foam packing is ideal for protecting the monitor during transport.
BenQ LCD Monitor
Monitor Base
Power Cord
(Picture may differ from product supplied 
for your region.)
Video Cable: D-Sub 
Card...

Page 5

  5   Getting to know your monitor
2. Getting to know your monitor
Front view
Back view
 Above diagram may vary depending on the model.1. Power button
2. Control buttons
3. AC Power Input jack
4. Cable clip
5. HDMI socket
6. D-Sub socket
7. Lock switch
8. Headphone jack
1
3
2
567
8
4
 

Page 6

6  How to assemble your monitor hardware  
3. How to assemble your monitor hardware
If the computer is turned on you must turn it off before continuing. 
Do not plug-in or turn-on the power to the monitor until instructed to do so. 
1. Attach the monitor base.
Please be careful to prevent damage to the monitor. 
Placing the screen surface on an object like a stapler or a 
mouse will crack the glass or damage the LCD substrate 
voiding your warranty. Sliding or scraping the monitor 
around on your desk...

Page 7

  7   How to assemble your monitor hardware
(For V2400 Eco)
Orient and align the stand base socket with the end of the 
stand arm, then push them together. Tighten the 
thumbscrew on the bottom of the monitor base as 
illustrated. 
Gently attempt to pull them back apart to check that they 
have properly engaged.
Carefully lift the monitor, turn it over and place it upright 
on its stand on a flat even surface.
You should position the monitor and angle the screen to 
minimize unwanted reflections from...

Page 8

8  How to assemble your monitor hardware  
2. Connect the PC video cable 
To Connect the D-Sub Cable
Connect the plug of the D-Sub cable (at the end without 
the ferrite filter) to the monitor video socket. Connect the 
other end of the cable (at the end with the ferrite filter) to 
the computer video socket.
Tighten all finger screws to prevent the plugs from 
accidently falling out during use.
To Connect the HDMI Cable
Connect the plug of the HDMI cable to one of the two 
HDMI ports on the monitor....

Page 9

  9   How to assemble your monitor hardware
6. Connect-to and turn-on the power.
Plug the other end of the power cord into a power outlet 
and turn it on.
Picture may differ from product supplied for your region.
Turn on the monitor by pressing the power button. 
Turn on the computer too, and follow the instructions in 
Section 4: 
Getting the most from your BenQ monitor 
on page 12
 to install the monitor software.
 

Page 10

10  How to assemble your monitor hardware  
How to use the card holder and the cup
1. Attach the cup and the card holder.
Connect the cup and the card holder to the monitor base.
2. Place a card (e.g. a business card) to the card holder 
as illustrated.
3. Alternatively, remove the card holder, and use the 
cup for paper clips or plants. 
 
Start reading BenQ V2200 Eco User Manual

Related Manuals for BenQ V2200 Eco User Manual

All BenQ manuals