BenQ V2200 Eco User Manual
Here you can view all the pages of manual BenQ V2200 Eco User Manual. The BenQ manuals for Monitor are available online for free. You can easily download all the documents as PDF.
Page 2
Copyright Copyright © 2010 by BenQ Corporation. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of BenQ Corporation. Disclaimer BenQ Corporation makes no representations or warranties, either expressed or implied, with respect to the...
Page 3
Table of Contents Copyright .......................................................................................................................... 2 Disclaimer ......................................................................................................................... 2 Getting started .................................................................................................................. 4 Getting to know your monitor...
Page 4
4 Getting started 1. Getting started When unpacking please check you have the following items. If any are missing or damaged, please contact the place of purchase for a replacement. Consider keeping the box and packaging in storage for use in the future when you may need to transport the monitor. The fitted foam packing is ideal for protecting the monitor during transport. BenQ LCD Monitor Monitor Base Power Cord (Picture may differ from product supplied for your region.) Video Cable: D-Sub Card...
Page 5
5 Getting to know your monitor 2. Getting to know your monitor Front view Back view Above diagram may vary depending on the model.1. Power button 2. Control buttons 3. AC Power Input jack 4. Cable clip 5. HDMI socket 6. D-Sub socket 7. Lock switch 8. Headphone jack 1 3 2 567 8 4
Page 6
6 How to assemble your monitor hardware 3. How to assemble your monitor hardware If the computer is turned on you must turn it off before continuing. Do not plug-in or turn-on the power to the monitor until instructed to do so. 1. Attach the monitor base. Please be careful to prevent damage to the monitor. Placing the screen surface on an object like a stapler or a mouse will crack the glass or damage the LCD substrate voiding your warranty. Sliding or scraping the monitor around on your desk...
Page 7
7 How to assemble your monitor hardware (For V2400 Eco) Orient and align the stand base socket with the end of the stand arm, then push them together. Tighten the thumbscrew on the bottom of the monitor base as illustrated. Gently attempt to pull them back apart to check that they have properly engaged. Carefully lift the monitor, turn it over and place it upright on its stand on a flat even surface. You should position the monitor and angle the screen to minimize unwanted reflections from...
Page 8
8 How to assemble your monitor hardware 2. Connect the PC video cable To Connect the D-Sub Cable Connect the plug of the D-Sub cable (at the end without the ferrite filter) to the monitor video socket. Connect the other end of the cable (at the end with the ferrite filter) to the computer video socket. Tighten all finger screws to prevent the plugs from accidently falling out during use. To Connect the HDMI Cable Connect the plug of the HDMI cable to one of the two HDMI ports on the monitor....
Page 9
9 How to assemble your monitor hardware 6. Connect-to and turn-on the power. Plug the other end of the power cord into a power outlet and turn it on. Picture may differ from product supplied for your region. Turn on the monitor by pressing the power button. Turn on the computer too, and follow the instructions in Section 4: Getting the most from your BenQ monitor on page 12 to install the monitor software.
Page 10
10 How to assemble your monitor hardware How to use the card holder and the cup 1. Attach the cup and the card holder. Connect the cup and the card holder to the monitor base. 2. Place a card (e.g. a business card) to the card holder as illustrated. 3. Alternatively, remove the card holder, and use the cup for paper clips or plants.