BenQ Projector MP780 ST+ User Manual

Operation
51 Infrastructure mode connection, you need to select the projector’s SSID which 
you want to connect. See Displaying image through Q Presenter on page 60 for 
details.
4. Use your computer’s wireless connection utility to connect the network.
If WEP Key is set in the projector, the user must enter the password of WEP Key to connect the 
network.
Controlling the projector remotely through a web 
browser
Once you have configured the LAN settings, you can find the IP address for the projector 
in...

Operation 52
• The illustrations in web page control, Q Presenter and USB Reader sections are for the 
purpose of explanation and may differ from the actual design of your projector.
3. Click Download to save Q Presenter software on your computer.
You can also link to the web page control from Q Presenter > Settings > Advanced Setting > 
Control projector via web page on page 63. 
4. Execute the program installation.
5. Open Q Presenter, search and connect a network display. See Displaying image 
through...

Operation
53 i. These buttons function the same as the ones on the remote control. See 
Remote control on page 13 for details.
The Display Setting page allows you to operate the projector as if  you were using the 
OSD menus. These functions are some useful  menu settings.
The Picture Setting page allows you to manage the projector as if  you were using the 
PICTURE menu.
The Information page displays the information and status of this projector. 

Operation 54The Conference Control page allows you to control computer’s display status of all the 
computers linked to this projector.
The Crestron page is only available when you are  on a Wired LAN network. It also allows 
you to control the projector remotely. The Crestron supports RoomView version 6.2.2.9. 

Operation
55 i. These buttons function the same as the ones on the OSD menus or remote 
control. See 2. PICTURE on page 76 and Remote control on page 13 for 
details.
The Menu button can also be used to go back to previous OSD menu, exit and save menu 
settings.
ii. To switch input source, click on your desired signal.
iii. You can select a preferred OSD language.
The tools page allows you to manage the projector, configure the LAN control settings and 
secure access of remote network operation on this...

Operation 56i. You can name the projector, keep track of its location and the person in charge 
of it.
ii. You can adjust the Wired LAN settings.
iii. Once set, access to the remote network operation on this projector has been 
password-protected.
iv. Once set, access to the tools page has been password-protected.
After making the adjusents, press the Send button and the data will be saved in the projector.
v. P re s s  exit to go back to the Crestron remote network operation page.
The info page displays...

Operation
57 The Basic page allows you to change the password and select connected persons. The 
number of connected persons may affect the network display performance. 

Operation 58The Wired LAN page allows you to adjust the Wired LAN settings.
The Wireless LAN page allows you to adjust the Wirless LAN settings.
Max. length for SSID string is 16 bytes. Please use a different SSID when more than two 
projectors are connecting through wireless LAN. 

Operation
59 The Mail page allows you to send alert e-mail to your ITS administrator.
You can first try the Mail Test function to check if the Alert Mail works. 

Operation 60
Displaying image through Q Presenter
The Q Presenter is an application running on the host PC. It connects to an available 
network display and transfers the desktop contents to the network display via local 
network connection.
Be sure to turn off other virtual network control programs before using Q Presenter.
1. Connect the projector with the RJ45 cable, and make sure your laptop or computer 
also link to the LAN. See Configuring the Wired LAN Settings on page 50 and 
Configuring the...