BenQ Projector MP780 ST+ User Manual

Operation
61 ii. Projectors linked in the LAN will be found. Then select the projector you want 
to link.
iii. Click “Connect”. Then you should be able to see the image on projector.
iv. You can click to disconnect all connected projectors..
The Special Feature page allows you to have some advanced functions to manage the 
display image on your projector.
i. Full Screen: whole image display on the projector. Selectable: a square will pop-
up then you can move and drag the area you want to show the...

Operation 62ii. You can select to stop/start displaying desktop contents to connected network 
display.
iii. 4-1 Display (up to 4 computers can shoot to 1 projector at the same time). Click 
the location you want to display. 4locations can be chosen (1-4) or 2 places (L 
and R) if it’s 2 computers. Once you click the place you want to display, the image 
appers on th eprojector. You can change th elocation anytime you want, even 
back to full screen or blank out.
The Basic and Advanced Settings pages...

Operation
63 vii. You can select Video or Graphic display mode. Graphic Mode: worse image 
quality but faster tramsmission speed. Video Mode: better image quality but 
slower transmission speed. However, the actual transmission performance was 
determined by the status of network usage at that time.
viii. You can adjust the capture rate. The network bandwidth may also affect the 
performance.
ix. You can select whether to automatically open the Q Presenter application when 
the computer is powered on.
x....

Operation 64
Using the Web Control Lock
This function is designed to prevent unauthorized people from maliciously changing the 
projector settings through the Projector Network Display System. 
To enable the function:
1. After your computer is connected to the projector, enter the address of the 
projector in the address bar of your browser and press Enter.
2. Go to the Admin page of the Projector Network Display System.
3. Enter the current password.
4. Click ON in the Web Control Lock row.
The next...

Operation
65
Presenting From a USB Reader
This fature displays a slide show of images stored on a USB flash drive connected to the 
projector. It can eliminate the need for a computer source.
Image File Types
USB Reader displays images files in JPEG, GIF, TIFF, PNG and BMP formats.
• A square box will display on the filename for unidentified characters.
• Thai filename is not supported.
• Files in GIF, TIFF, PNG and BMP formats can be displayed for the file size smaller than 
WXGA (1280 x 800) only.
• If...

Operation 66ii. Selected folder
iii. Supported file format
iv. Unsupported file format
During slideshow:
ToPress
open folder Enter
scroll through thumbnails four arrow keys
return to a previous page Auto
exit USB Reader Exit
change to a different page
/ 
go back to the first page of that folder Back
start slide show Slideshow when an image is highlighted.
adjust USB Reader settings Setting
ToPress
go to previous or next image
/ 
rotate the image by 90 degree clockwise/
counterclockwise/
(Rotation is...

Operation
67 Settings page:
i. You can adjust order settings.
ii. You can adjust Slideshow settings.
iii. Press OK to save the settings.
iv. Press Cancel to ignore the change. start/stop slideshow Enter
ii
iiiiv
i 

Operation 68
Remote Desktop Control through Q Presenter
The Q Presenter can proceed the Remote Desktop Control (RDC) the host PC from 
projector site.
1. Setup the RDC login account (User name and Password ) in Q Presenter.
• Name: must be 8 English capital letters A~Z and number 0 ~9.
• Password: must be 6 digits and limit the range from 1~4.
• If there are lot of audience is watching the display while the user is entering the 
password, the number will be transferred to up, left, down, right in order...

Operation
69 3. Open the OSD menu and go to the SYSTEM SETUP: Advanced > Network 
Settings menu. Press MODE/ENTER.
4. Highlight Remote Desktop and press MODE/
ENTER.
5. Enter the Account and Password the same as 
step 1.
6. Highlight Connect and press MODE/ENTER 
to connect the selected PC.
7. Connect USB keyboard or mouse to control the 
host PC’s desktop through the projector.
• Remote Desktop Control does not support PC Standby mode.
• Remote Desktop Control only supports LAN source so the projector...

Operation 70
Po i n t D r aw ™ Pe n  2 . 0
The PointDraw™ pen works like a wireless mouse - but one that works in midair, not on 
your desktop. Just hold the pen in your hand, and point it at the projected image to point, 
click and drag.
1. Make sure the PointDraw™ pen’s battery is charged.
The charging time will take approximate 2.5 hours and will allow 30-35 hours of pen use.
• Do not use the PointDraw™ pen while the pen’s battery is charging.
• Do not disassemble the PointDraw™ pen yourself. Refer...