BenQ Projector MP780 ST+ User Manual

Operation
41
Setting the User 1/User 2 mode
There are two user-definable modes if the current available picture modes are not suitable 
for your need. You can use one of the picture modes (except the User 1/User 2) as a 
starting point and customize the settings.
1. Press MENU/EXIT to open the On-Screen Display (OSD) menu.
2. Go to the PICTURE > Picture Mode menu.
3. Press  /  to select User 1 to User 2.
4. Press  to highlight Reference Mode.
This function is only available when User 1 or User 2 mode is...

Operation 42
Adjusting Sharpness
The higher the value, the sharper the picture becomes. The lower the value, the softer the 
picture becomes.
Adjusting Brilliant Color
This feature utilizes a new color-processing algorithm and system level enhancements to 
enable higher brightness while providing truer, more vibrant colors in picture. It enables a 
greater than 50% brightness increase in mid-tone images, which are common in video and 
natural scenes, so the projector reproduces images in realistic and...

Operation
43 2. Press MODE/ENTER and the 3D Color Management page displays.
3. Highlight Primary Color and press  /  to select a color from among Red, 
Yellow, Green, Cyan, Blue, or Magenta.
4. Press   to highlight Hue and press  /  to select its range. Increase in the range 
will include colors consisted of more proportions of its two adjacent colors.
Please refer to the illustration to the right 
for how the colors relate to each other.
For example, if you select Red and set its 
range at 0, only pure...

Operation 44
Creating your own startup screen
In addition to selecting the projector preset startup screen from among BenQ logo, Black 
or Blue screen, you can make your own startup screen that is an image projected from 
your computer or video source.
1. Project the image you want to use as your 
startup screen from either a computer or 
video source.
2. Press CAPTURE on the remote control or 
go to the SYSTEM SETUP: Basic > 
MyScreen menu, press MODE/ENTER.
3. A confirmation message displays. Press...

Operation
45
Setting the presentation timer
The presentation timer can indicate the presentation time on the screen to help you 
achieve better time management when giving presentations. Follow these steps to utilize 
this function:
1. Go to the SYSTEM SETUP: Basic > Presentation Timer menu and press 
MODE/ENTER to display the Presentation Timer page.
2. Highlight Timer period and decide the timer period by pressing  / . The length 
of time can be set from 1 to 5 minutes in 1-minute increments and 5 to...

Operation 46
Remote paging operations
Connect the projector to your PC or notebook 
with a USB cable prior to using the paging function. 
See Connecting a computer on page 23 for details.
You can operate your display software program (on 
a connected PC) which responds to page up/down 
commands (like Microsoft PowerPoint) by pressing 
PAGE UP/DOWN on the remote control. 
If remote paging function doesnt work, check if the 
USB connection is correctly made and the mouse 
driver on your computer is updated...

Operation
47
Utilizing FAQ function
The INFORMATION menu contains possible solutions to problems encountered by 
users regarding image quality, installation, special feature operation and service 
information.
To get the FAQ information:
1. Press   on the remote control or press 
MENU/EXIT to open the OSD menu and 
press  /  to highlight the 
INFORMATION menu.
2. Press  to highlight FAQ-Image and 
Installation or FAQ-Features and Service 
based on the information you want to know.
3. Press MODE/ENTER.
4....

Operation 48
Operating in a high altitude environment
We recommend you use the High Altitude Mode when your environment is between 
1500 m –3000 m above sea level, and ambient temperature is between 0°C–35°C.
Do not use the High Altitude Mode if your altitude is between 0 m and 1500 m and ambient 
temperature is between 0°C and 35°C. The projector will be over cooled, if you turn the mode 
on under such a condition.
To activate the High Altitude Mode:
1. Press MENU/EXIT and then press  /  until the...

Operation
49 2. Highlight Power on/off Ring Tone and select Off.
The only way to change Power on/off ring tone is setting On or Off here. Setting the sound mute 
or changing the sound level will not affect the Power on/off ring tone.
Adjusting the microphone’s sound level
To adjust the sound level, press MIC/VOL +/- on 
the remote control, or
1. Repeat steps 1-2 in Muting the sound section.
2. Highlight Microphone volumee and select a 
desired sound level.
Microphone sound will still function even though...

Operation 50
Controlling the projector through a LAN
environment
Network Settings allow you to manage the projector from a computer using a web 
browser when the computer and the projector are properly connected to the same local 
area network.
Configuring the Wired LAN Settings
If you are in a DHCP environment:
1. Take a RJ45 cable and connect one end to the LAN input jack of the projector and 
the other end to the RJ45 port.
2. Press MENU/EXIT and then press  /  until the SYSTEM SETUP: 
Advanced menu...