BenQ Projector MP780 ST+ User Manual
Have a look at the manual BenQ Projector MP780 ST+ User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 702 BenQ manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Operation 51 Infrastructure mode connection, you need to select the projector’s SSID which you want to connect. See Displaying image through Q Presenter on page 60 for details. 4. Use your computer’s wireless connection utility to connect the network. If WEP Key is set in the projector, the user must enter the password of WEP Key to connect the network. Controlling the projector remotely through a web browser Once you have configured the LAN settings, you can find the IP address for the projector in the bottom of the network screen. You can use any computer that is on the same local area network to control the projector. 1. Enter the address of the projector in the address bar of your browser and press Enter. For example: http://10.60.7.31 2. The BenQ remote network operation page opens. • The web page control supports IE version 7.0 or higher.
Operation 52 • The illustrations in web page control, Q Presenter and USB Reader sections are for the purpose of explanation and may differ from the actual design of your projector. 3. Click Download to save Q Presenter software on your computer. You can also link to the web page control from Q Presenter > Settings > Advanced Setting > Control projector via web page on page 63. 4. Execute the program installation. 5. Open Q Presenter, search and connect a network display. See Displaying image through Q Presenter on page 60 for details. The Virtual Keypad page allows you to operate the projector as if you were using the remote control or control panel on the projector. i i
Operation 53 i. These buttons function the same as the ones on the remote control. See Remote control on page 13 for details. The Display Setting page allows you to operate the projector as if you were using the OSD menus. These functions are some useful menu settings. The Picture Setting page allows you to manage the projector as if you were using the PICTURE menu. The Information page displays the information and status of this projector.
Operation 54The Conference Control page allows you to control computer’s display status of all the computers linked to this projector. The Crestron page is only available when you are on a Wired LAN network. It also allows you to control the projector remotely. The Crestron supports RoomView version 6.2.2.9.
Operation 55 i. These buttons function the same as the ones on the OSD menus or remote control. See 2. PICTURE on page 76 and Remote control on page 13 for details. The Menu button can also be used to go back to previous OSD menu, exit and save menu settings. ii. To switch input source, click on your desired signal. iii. You can select a preferred OSD language. The tools page allows you to manage the projector, configure the LAN control settings and secure access of remote network operation on this projector. i i i ii iii iii iiiv v i
Operation 56i. You can name the projector, keep track of its location and the person in charge of it. ii. You can adjust the Wired LAN settings. iii. Once set, access to the remote network operation on this projector has been password-protected. iv. Once set, access to the tools page has been password-protected. After making the adjusents, press the Send button and the data will be saved in the projector. v. P re s s exit to go back to the Crestron remote network operation page. The info page displays the information and status of this projector. i. Press exit to go back to the Crestron remote network operation page. The Admin page allows you to enter Basic, Wired LAN, Wireless LAN and Mail pages once the password is entered. The default password is “0000”. If you want to change the password, please enter Basic page. i
Operation 57 The Basic page allows you to change the password and select connected persons. The number of connected persons may affect the network display performance.
Operation 58The Wired LAN page allows you to adjust the Wired LAN settings. The Wireless LAN page allows you to adjust the Wirless LAN settings. Max. length for SSID string is 16 bytes. Please use a different SSID when more than two projectors are connecting through wireless LAN.
Operation 59 The Mail page allows you to send alert e-mail to your ITS administrator. You can first try the Mail Test function to check if the Alert Mail works.
Operation 60 Displaying image through Q Presenter The Q Presenter is an application running on the host PC. It connects to an available network display and transfers the desktop contents to the network display via local network connection. Be sure to turn off other virtual network control programs before using Q Presenter. 1. Connect the projector with the RJ45 cable, and make sure your laptop or computer also link to the LAN. See Configuring the Wired LAN Settings on page 50 and Configuring the Wireless LAN Settings on page 50 for details. 2. Find the IP address and enter the address of the projector in the address bar of your browser. See Controlling the projector remotely through a web browser on page 51 for details. 3. Download the Q Presenter, unzip it and complete program installation. 4. Once installed, double click the Q Presenter icon. The Q Presenter page appears. 5. Click the Search icon. The Search page allows you to search and connect a network display. i. You can key in the IP address (see Controlling the projector remotely through a web browser on page 51 for details.) or just click “Search”. i ii iii iv