BenQ Pb6200/pb6100 Digital Projector Users Manual

Maintenance 27
Resetting Lamp Hours
If you replace the lamp with a new one, please follow the instructions below to reset the 
lamp hour.   
Te m p  I n f o r m a t i o n
When the LED lights up, it is warning you of the following possible problems:
1. The internal temperature is too high.
2. The fans are not working.
Turn the projector off and contact qualified service personnel for further help.
For more detailed information, please refer to LED Indicator Status & Illustration on page 
28....

Maintenance 28
LED Indicator Status & Illustration
llustration
1.- : LED OFF
2.  : LED blinking
3.  : LED solid ON
4.
O : LED lights up orange.
5.
R : LED lights up red.
6.
G : LED lights up green.   
LED Status & Description
Power Temp Lamp
Power e vents
Power sw itch on 
--
Power-up cooling. Projector cooling system will auto-cool for 
110 seconds when power was abnormally shutdown without 
cooling and power on again within hours.
--
Stand-by
--
Lamp LED is blinking during powering up.
--
Power-down...

Maintenance 29
Thermal events
-
Fan 1 error, projector will auto shutdown. If you return on the 
power, and projector shutdown again. Please contact your 
dealer.
Fan 2 error, projector will auto shutdown. If you return on the 
power, and projector shutdown again. Please contact your 
dealer.
Fan 3 error, projector will auto shutdown. If you return on the 
power, and projector shutdown again. Please contact your 
dealer.
-
Thermal sensor 1 over-temperature, projector will auto 
shutdown. If you return on...

Maintenance 30
Service Information
Accessories (included in the standard package) 
Alternative Accessories (vary from country to country)
Optional Accessories (not included in the standard package)
Ordering Parts or Getting Information
For product information, product assistance, service information, or to order accessories, 
please visit the BENQ Corporation website at http://www.BenQ.com. Description of parts  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Part...

Troubleshooting 31
Troubleshooting
Common Problems & Solutions
NO POWER
Try these solutions: 
• Make sure the power cord is inserted snugged into the AC adapter socket.
• Make sure the power cord is inserted snugged into the power outlet.
• Toggle the power switch to the position “
|”.
• Wait 110 seconds after the projector is turned off before turning the projector back on.
NO PICTURE
Try these solutions: 
• Check for the proper input source.
• Ensure all cables are connected properly.
• Adjust the...

Troubleshooting 32
Status Messages    
On-Screen MessagesDescription
SEARCHINGProjector is searching for input.
ACQUIRING SIGNALProjector has identified the input signal and is 
running the auto image adjustment function.
OUT OF RANGEInput signal frequency exceeds the projector’s range.
Lamp Warning - Change 
Lamp If Brightness Is Low.The lamp has been in operation for over 1980 hours. 
Install a new lamp for optimal performance. This 
message will display for 10 seconds after starting up 
the...

Specifications 33
Specifications
Projector Specifications 
Technical Specifications
All specifications are subject to change without notice. 
General
Product name Digital Projector
Model name PB6200         1024X768  XGA
PB6100         800X600  SVGA
Optical
Display system 1-CHIP DMD
Lens F/Number F = 2.4 to 2.6, f = 24.3 ~ 29.2 mm
Lamp 200W lamp
Electrical
Power supply AC100 ~ 240V, 3.2A, 50/60 Hz (Automatic)
Power consumption 285W (Max)
Mechanical
Dimensions 262 mm (W) x 98.4 mm (H) x 215.5 mm (D)...

Specifications 34
Timing Chart 
Resolution H Sync (kHz) V Sync (Hz) Remark
640x350 31.5 70.1
640x400 37.9 85.1 VESA
720x400 31.5 70.0
720x400 37.9 85.1 VESA
640x480 31.5 60.0 VESA
640x480 37.9 72.8 VESA
640x480 35 66.7 Macintosh
640x480 43.3 85.0 VESA
800x600 35.2 56.3 VESA
800x600 37.9 60.3 VESA
800x600 46.9 75.0 VESA
800x600 48.1 72.2 VESA
800x600 53.7 85.1 VESA
832x624 49.7 74.5 Macintosh
1024x768 48.4 60.0 VESA
1024x768 56.5 70.1 VESA
1024x768 60.0 75.0 VESA
1024x768 68.7 85.0 VESA
1280x1024 64.0...

Dimensions 35
Dimensions
Unit: mm
262
215.5
98.4 

Warranty 36
Warranty
Limited Warranty
BENQ warrants this product against any defects in material and workmanship, under nor-
mal usage and storage. 
Exclusion to Warranty: The lamps are considered as consumable items and are warranted 
for 90 days or 1000 hours, whichever occurs first. Proof of purchase date will be required 
with any warranty claim. In the event this product is found to be defective within the war-
ranty period, BENQ’s only obligation and your exclusive remedy shall be replacement of...